100-105 Exam
Questions Ask for cisco 100 105 pdf
Want to know Exambible ccna 100 105 pdf Exam practice test features? Want to lear more about Cisco Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) certification experience? Study Download Cisco ccent ccna icnd1 100 105 answers to Latest 105 100 questions at Exambible. Gat a success with an absolute guarantee to pass Cisco 105 100 (Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)) test on your first attempt.
Q21. - (Topic 5)
If a host experiences intermittent issues that relate to congestion within a network while remaining connected, what could cause congestion on this LAN?
A. half-duplex operation
B. broadcast storms
C. network segmentation
D. multicasting
Answer: B
Explanation:
A broadcast storm can consume sufficient network resources so as to render the network unable to transport normal traffic.
Topic 6, Simulation
Q22. - (Topic 1)
Refer to the exhibit.
HostX is transferring a file to the FTP server. Point A represents the frame as it goes toward the Toronto router. What will the Layer 2 destination address be at this point?
A. abcd.1123.0045
B. 192.168.7.17
C. aabb.5555.2222
D. 192.168.1.1
E. abcd.2246.0035
Answer: E
Explanation:
For packets destined to a host on another IP network, the destination MAC address will be the LAN interface of the router. Since the FTP server lies on a different network, the host will know to send the frame to its default gateway, which is Toronto.
Q23. - (Topic 5)
The following commands are entered on the router:
Burbank(config)# enable secret fortress
Burbank(config)# line con 0
Burbank(config-line)# login
Burbank(config-line)# password n0way1n
Burbank(config-line)# exit
Burbank(config)# service password-encryption
What is the purpose of the last command entered?
A. to require the user to enter an encrypted password during the login process
B. to prevent the vty, console, and enable passwords from being displayed in plain text in the configuration files
C. to encrypt the enable secret password
D. to provide login encryption services between hosts attached to the router
Answer: B
Explanation:
Certain types of passwords, such as Line passwords, by default appear in clear text in the configuration file. You can use the service password-encryption command to make them more secure. Once this command is entered, each password configured is automatically encrypted and thus rendered illegible inside the configuration file (much as the Enable/Enable Secret passwords are). Securing Line passwords is doubly important in networks on which TFTP servers are used, because TFTP backup entails routinely moving config files across networks—and config files, of course, contain Line passwords.
Q24. - (Topic 5)
Refer to the exhibit.
The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three.)
A. Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B. Ensure that cables A and B are straight-through cables.
C. Ensure cable A is plugged into a trunk port.
D. Ensure the switch has power.
E. Reboot all of the devices.
F. Reseat all cables.
Answer: B,D,F
Explanation:
The ports on the switch are not up indicating it is a layer 1 (physical) problem so we should check cable type, power and how they are plugged in.
Q25. - (Topic 3)
A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?
A. the OSPF route
B. the EIGRP route
C. the RIPv2 route
D. all three routes
E. the OSPF and RIPv2 routes
Answer: B
Explanation:
When one route is advertised by more than one routing protocol, the router will choose to use the routing protocol which has lowest Administrative Distance. The Administrative Distances of popular routing protocols are listed below:
Q26. - (Topic 3)
Which statement describes the process ID that is used to run OSPF on a router?
A. It is globally significant and is used to represent the AS number.
B. It is locally significant and is used to identify an instance of the OSPF database.
C. It is globally significant and is used to identify OSPF stub areas.
D. It is locally significant and must be the same throughout an area.
Answer: B
Explanation:
The Process ID for OSPF on a router is only locally significant and you can use the same number on each router, or each router can have a different number-it just doesn't matter. The numbers you can use are from 1 to 65,535. Don't get this confused with area numbers, which can be from 0 to 4.2 billion.
Q27. - (Topic 4)
The ip helper-address command does what?
A. assigns an IP address to a host
B. resolves an IP address from a DNS server
C. relays a DHCP request across networks
D. resolves an IP address overlapping issue
Answer: C
Explanation:
http://cisconet.com/tcpip/dhcp/107-how-to-use-ip-helper-address-to-connect-remote-dhcp-
server.html
When the DHCP client sends the DHCP request packet, it doesn’t have an IP address. So it uses the all-zeroes address, 0.0.0.0, as the IP source address. And it doesn’t know how to reach the DHCP server, so it uses a general broadcast address, 255.255.255.255, for the destination. So the router must replace the source address with its own IP address, for the interface that received the request. And it replaces the destination address with the address specified in the ip helper-address command. The client device’s MAC address is included in the payload of the original DHCP request packet, so the router doesn’t need to do anything to ensure that the server receives this information. The router then relays the DHCP request to the DHCP server.
Q28. - (Topic 3)
The command ip route 192.168.100.160 255.255.255.224 192.168.10.2 was issued on a router. No routing protocols or other static routes are configured on the router. Which statement is true about this command?
A. The interface with IP address 192.168.10.2 is on this router.
B. The command sets a gateway of last resort for the router.
C. Packets that are destined for host 192.168.100.160 will be sent to 192.168.10.2.
D. The command creates a static route for all IP traffic with the source address
192.168.100.160.
Answer: C
Explanation:
With 160 it's actually network address of /27 so any address within the range of .160-.191 network will be sent to 192.168.10.2
Q29. - (Topic 5)
Refer to the exhibit.
A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?
A. This design will function as intended.
B. Spanning-tree will need to be used.
C. The router will not accept the addressing scheme.
D. The connection between switches should be a trunk.
E. The router interfaces must be encapsulated with the 802.1Q protocol.
Answer: C
Explanation:
The proposed addressing scheme is on the same network. Cisco routers will not allow you to assign two different interfaces to be on the same IP subnet.
Q30. - (Topic 5)
Refer to the exhibit.
A person is trying to send a file from a host on Network A of the JAX Company to a server
on Network Z of the XYZ Company. The file transfer fails. The host on Network A can communicate with other hosts on Network A.
Which command, issued from router RTA, would be the most useful for troubleshooting this problem?
A. show flash:
B. show history
C. show version
D. show interfaces
E. show controllers serial
Answer: D
Explanation:
The most useful thing to check on RTA would be the show interfaces command to see if the interface toward the WAN link is up. The most likely scenario is that the local LAN interface is up, but the other interface toward the XYZ company is down.