NEW QUESTION 1
How should you disable the Delete button for an employee after their time card has been submitted?

• A. by specifying the Time Entry Actions Allowed on the Security Task Profile
• B. by specifying the Time Entry Actions Allowed on the Time Entry Processing Profile
• C. by specifying the Time Entry Actions Allowed on the Worker Time Entry Setup Profile
• D. by specifying the Time Entry Actions Allowed on the Time Card Layout

Answer: B

NEW QUESTION 2
A customer defines work schedules by using both elapsed and time-based shifts. How should you configure the Time and Labor time entry layout so that it properly shows the scheduled absences on the time card?

• A. The time entry layout must include start and stop times along with the hidden Absence Plan time attribute and the displayed absence values.
• B. The time entry layout must be part of a layout set that is configured by using the Absence Management Time Consumer template.
• C. The time entry layout must include start and stop times along with the required assignment, in addition to a time card field for the absence values.
• D. Absence entries can be entered only by suing the Calendar Entry layout in the layout set.
• E. The time entry layout must contain the delivered, but hidden Schedule time attributes time card field.

Answer: C

NEW QUESTION 3
Workers can be assigned a night shift allowance when reporting time between 08:00PM and 11:00PM. Which two options should you perform to configure that?

• A. You define a unit’s x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, define a time entry field dependent on the payroll time type time attribute using the units x rate time attribute, and manually assign one quantity of the dependent time attribute on the worker’s time card.
• B. You define an hours x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and define a time calculation rule to automatically generate the night shift allowance based on the night conditions.
• C. You define a unit’s x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and define a time calculation rule to automatically generate the night shift allowance based on the night conditions.
• D. You define a unit’s x rate element in Global Payroll that the worker would be eligible for, submit the Generate Data Dictionary Time Attributes process, and manually assign one quantity of the payroll time type related to the night shift allowance on the worker’s time card.

Answer: BD

NEW QUESTION 4
Which are valid approval time periods for Time and Labor?

• A. any, just depends on the Repeating Time Period used in the Approval Rule
• B. any, just depends on the HCM Group used in the Approval Rule
• C. weekly, biweekly
• D. weekly, biweekly, monthly
• E. weekly, semimonthly, monthly
• F. weekly, semimonthly

Answer: A

NEW QUESTION 5
You need to easily identify and copy time card data while managing time cards. Which action can use in the Favorite Time Cards feature to accomplish this?

• A. recalculate for retroactive changes
• B. process time cards for mass approval
• C. delete a current time card
• D. create or complete your current time card

Answer: D

NEW QUESTION 6
You have 10 different Legislative Data Groups (LDG) defined. Each LDG has a different set of Payroll Time Types and Absence Types.
How should you configure a Layout Component to display the proper values in one single list on the Time Entry Layout?

• A. Create a Multiple Attribute Time Card Field, filtering the list using Assignment ID.
• B. Create a Multiple Attribute Time Card field, filtering the displayed values based on the LDG Filtering function.
• C. Create a Multiple Attribute Time Card Field, filtering the list using Element Eligibility.
• D. Cannot be done in one lis
• E. This requires two separate selection lists (Time Card fields), placed on the Time Entry Layout.

Answer: B

NEW QUESTION 7
What determines the validation and approval of payroll time types for Fusion Payroll?

• A. Use of the delivered payroll time attributes and payroll time card fields.
• B. Assignment of the customer-defined Time and Labor – Time Entry Rules (TER).
• C. Assignment of a properly defined payroll time consumer set.
• D. Assignment of the delivered payroll layout set and time entry options.

Answer: A

NEW QUESTION 8
A client wants their workers to report earned compensatory time on their time cards.
What three-time entry setup configuration tasks do you need to complete during implementation before workers can report compensatory time?

• A. Manage Time Entry Layout Components
• B. Manage Time Layout Sets
• C. Manage Time Calculation Rules
• D. Create an Absence Plan and enroll workers in the plan
• E. Manage Time Consumers

Answer: ABD

NEW QUESTION 9
Your customer identifies grades as 01, 02, 03, 04, and 05, with 05 being the most senior. You need to apply the same Time Processing Profile (TPP) to everyone below grade 04.
How should you do this?

• A. Add the TPP name to the definition of the grade.
• B. When creating the TPP, add the grades that will receive that TPP to the definition.
• C. Create a group using an evaluation criteria of Grade Equal To 01, Grade Equal to 02, or Grade Equal to03, and attach that group to the TPP.
• D. Create a group using an evaluation criteria of Grade Less Than 04 and attach that group to the TPP.
• E. Write a Fast Formula which, when executed, would return all employees in grades 01 to 03, and attach that to the TPP definition.

Answer: C

NEW QUESTION 10
Which is not a predefined approval task and task rule for payroll and project costing time entry approvals?

• A. a Payroll Time Card Approval task that automatically approves the time card if the total hours for time entries is 40 hours or less.
• B. a Project Time Card Approval task that routes time cards that contain time entries with a reported project, task, and expenditure type to the appropriate Project Manager
• C. a Payroll Time Card Approval task that routes payroll time entries to the Line Manager if the total hours for a time card exceed 40 hours
• D. a Payroll Time Card Approval task that automatically approves the time card unless it contains absences

Answer: D

Explanation:
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAUTL/FAUTL1471283.htm#FAUTL1471283

NEW QUESTION 11
What is the correct sequence of steps that you should perform to set multiple time attributes for different user groups?

• A. Configure the time attributes the rule to the TER Rule Set and then to the worker via the appropriate pro> Define a custom value set > Define the single-attribute time card field > Assign to a layout set > Assign to the time entry profile.
• B. Configure the time attributes > Define the single-attribute time card field > Assign to the time entry profile.
• C. Configure the time attributes > Define the multiple-attribute time card filed > Assign to the time entry profile.
• D. Configure the time attributes > Define the multiple-attribute time card filed > Assign to a layout set > Assign to the time entry profile.

Answer: C

NEW QUESTION 12
Which two statements are true?

• A. Time Card Approval Period can be less than the Time Card Period.
• B. Time Card Approval Period must be a multiple of the Time Card period.
• C. Time Card Approval Period is defined in the Time Consumer Set.
• D. Time Card approval period must be the same as the Time Card period.

Answer: CD

NEW QUESTION 13
When defining a customer-defined template using a new Time Calculation Rule fast formula, which two options on the Parameter train stop enhance the rule setup to minimize rule setup errors?

• A. Set the proper Parameter type values.
• B. Set the Time Attribute Value to Value Set.
• C. Set the “Required” flag.
• D. Set the Group.
• E. Set the Time Attribute Value Type to Text.
• F. Set the Time Attribute Value Type to Data Source.

Answer: AF

NEW QUESTION 14
What When executing the Generate Time Card Fields process, that will be setting the parameter “Include Absence Types” to Yes accomplish?

• A. enables Absence entries on the time entry and calendar entry layouts
• B. none of the above
• C. creates a multiple-attribute time card field with Absence Management type and Payroll Time type time attributes
• D. enables entry of Absence Plans directly on the time entry and calendar entry layouts
• E. updates available absence values for selection within the existing time card fields
• F. creates a multiple-attribute time card field with only the Absence Management type time attribute

Answer: A

NEW QUESTION 15
A company using T&L for payroll not projects has multiple locations close together and workers can work in more than one location each day. They need to identify on their time card which location they worked in for each part of the day.
How should you implement this to minimize the size of the time card and ensure accuracy?

• A. Use Daily Details to record the locatio
• B. Multiple locations on the same day would be entered as multiple daily details.
• C. Use a multi attribute time card field to combine the location information with the time type information so the user can select the correct combination.
• D. Use the Entry Level details capability to create a layout with Location as a daily detail.
• E. Add a Location field to the time card matrix and allow the users to enter each location as a new line.

Answer: B

NEW QUESTION 16
Which two capabilities are defined for workers in the Time Entry Profiles in Time and Labor?

• A. rules for time card actions that control when workers can enter, update, and delete their time
• B. time card period
• C. consumer set, validation, approval, and transfer processing
• D. layouts for reporting time

Answer: AD

Explanation:
Reference https://docs.oracle.com/cd/E51367_01/globalop_gs/FAUTL/F1471298AN1531B.htm

NEW QUESTION 17
How do you configure a time submission rule set used with time devices?

• A. Every time you create a time submission rule, the save action also creates a corresponding rule set.
• B. Use the time device import process to add time submission rules to the rule set.
• C. Every time you associate a time submission rule with the processing profile, the add action creates a corresponding rule set.
• D. Manage Time Submission Rule Set and add the submission rules to the set.

Answer: C

Explanation:
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAITL/FAITL2021781.htm#FAITL1788995

NEW QUESTION 18
Which statement is true about the way the planned schedule is defaulted?

• A. It is always defaulted with the workers’ standard working hours.
• B. It is always defaulted with the workers’ work schedules.
• C. It is defaulted with the workers’ availability.
• D. All three of the above options are true.

Answer: C

NEW QUESTION 19
On the Rule Template Outputs page for a time calculation rule formula, can you add additional outputs not defined in the formula?

• A. only for Time Device rules
• B. yes
• C. only for Time Validation rules
• D. no
• E. only for Time Entry rules

Answer: B

Explanation:
Reference https://docs.oracle.com/cloud/farel12/globalcs_gs/FAUTL/FAUTL1471285.htm#FAUTL1788594

NEW QUESTION 20
The Workforce Management business process contains which shard components?

• A. Repeating Time Periods, Time Repository, Data Dictionary
• B. Repeating Time Periods, Time Repository, Time Attributes
• C. Repeating Time Periods, Time Repository, Data Dictionary, Time Consumers
• D. Repeating Time Periods, Time Repository, Time Attributes, Time Consumers

Answer: D

NEW QUESTION 21
Which three tasks can a Time and Labor Manager perform from the planned schedule?

• A. Monitor absences.
• B. Monitor work coverage.
• C. Enter time for workers.
• D. Balance workloads.
• E. Schedule shifts.

Answer: BDE

Explanation:
Reference https://docs.oracle.com/cloud/r13_update17b/globalcs_gs/FAUTL/FAUTL1657098.htm#FAUTL1657098

NEW QUESTION 22
Which delivered Role, Workarea, and Task combinations should be used when troubleshooting rule processing issues to determine which rules and rule sets are executed against a specific worker’s time card for a specific time card action?

• A. Time and Labor Manager, Setup and Maintenance Work Area, Analyze Rule Processing Details Task
• B. Time and Labor Manager, Time Management Work Area, Manage Time Repository Rule Sets
• C. Time and Labor Administrator, Setup and Maintenance Work Area, Analyze Rule Processing Details Task
• D. Time and Labor Administrator, Time Management Work Area, Analyze Rule Processing Details Task
• E. Time and Labor Manager, Time Management Work Area, Analyze Rule Processing Details Task
• F. Time and Labor Administrator, Setup and Maintenance Work Area, Manage Worker Time Processing Profile Task

Answer: F

NEW QUESTION 23
Workers need to record two mandatory and an additional four optional time card fields against each row of their start/stop time card. Which option will minimize the quantity of horizontal scrolling required when completing the weekly time card?

• A. Configure the layout with the optional fields as Row Level Details.
• B. Use Daily Details to record optional fields.
• C. Combine the optional fields together into one or two “multi attribute time card fields” and display these on the time card.
• D. Configure the layout to show all six time card fields and use personalization to adjust the column widths, including those for recording the start & stop time to the smallest appropriate for the data.
• E. Implement the same changes as in the first answer but also fix the two mandatory columns, so that only the optional and days of the week scroll.

Answer: D

NEW QUESTION 24
How would you enable a weekly overtime calculation on a bi-weekly time card so that on the eighth day of the time card, the overtime calculation is reset?

• A. You would use a weekly repeating period for the time calculation rules and define a weekly repeating period for the time entry layou
• B. When creating the weekly overtime rule, you would need to copy and customize the WFM_THRESHOLD_TIME_CALCULATION_RULE_AP formula to reset the total after seven days.
• C. You would use a bi-weekly repeating period for the time calculation rules and define a bi-weekly repeating period for the time entry layou
• D. When creating the weekly overtime rule, you would need to copy and customize the WFM_THRESHOLD_TIME_CALCULATION_RULE_AP formula to reset the total after seven days.
• E. This is not possible so you will not do anything.
• F. You would use a weekly repeating period for the time calculation rules and define a bi-weekly repeating period for the time entry layou
• G. When creating the weekly overtime rule, you would need to copy and customize the WFM_THRESHOLD_TIME_CALCULATION_RULE_AP formula to reset the total after seven days.

Answer: A

NEW QUESTION 25
......