getcertified4sure.com

Today Big Q: ccna 200 125 torrent?




We provide real 200 125 ccna pdf exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco ccna 200 125 torrent Exam quickly & easily. The 200 125 ccna pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco ccna routing and switching 200 125 pdf dumps pdf and vce product and material, you can easily pass the ccna 200 125 book exam.

P.S. Actual 200-125 lab are available on Google Drive, GET MORE: https://www.slideshare.net/reinigerodp/certleader-200-125examquestionsmaterials


New Cisco 200-125 Exam Dumps Collection (Question 3 - Question 12)

Q1. Refer to the topology shown in the exhibit.

Which three ports will be STP designated ports if all the links are operating at the same bandwidth? (Choose three.)

A. Switch A - Fa0/0

B. Switch A - Fa0/1

C. Switch B - Fa0/0

D. Switch B - Fa0/1

E. Switch C - Fa0/0

F. Switch C - Fa0/1

Answer: B,C,D

Explanation:

This question is to check the spanning tree election problem.

1. First, select the root bridge, which can be accomplished by comparing the bridge ID, the smallest will be selected. Bridge-id= bridge priority + MAC address. The three switches in the figure all have the default priority, so we should compare the MAC address, it is easy to find that SwitchB is the root bridge.

2. Select the root port on the non-root bridge, which can be completed through comparing root path cost. The smallest will be selected as the root port.

3. Next, select the Designated Port. First, compare the path cost, if the costs happen to be the same, then compare the BID, still the smallest will be selected. Each link has a DP. Based on the exhibit above, we can find DP on each link. The DP on the link between SwitchA and SwitchC is SwitchA'Fa0/1, because it has the smallest MAC address.

Topic 7, Routing Technologies

664.A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network?

A. a directly connected interface with an address of 192.168.10.254/24

B. a static route to network 192.168.10.0/24

C. a RIP update for network 192.168.10.0/24

D. an OSPF update for network 192.168.0.0/16

E. a default route with a next hop address of 192.168.10.1

F. a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop


Q2. What does a Layer 2 switch use to decide where to forward a received frame?

A. source MAC address

B. source IP address

C. source switch port

D. destination IP address

E. destination port address

F. destination MAC address

Answer: F

Explanation:

When a frame is received, the switch looks at the destination hardware address and finds the interface if it is in its MAC address table. If the address is unknown, the frame is broadcast on all interfaces except the one it was received on.


Q3. What are three advantages of VLANs? (Choose three.)

A. VLANs establish broadcast domains in switched networks.

B. VLANs utilize packet filtering to enhance network security.

C. VLANs provide a method of conserving IP addresses in large networks.

D. VLANs provide a low-latency internetworking alternative to routed networks.

E. VLANs allow access to network services based on department, not physical location.

F. VLANs can greatly simplify adding, moving, or changing hosts on the network.

Answer: A,E,F

Explanation:

VLAN technology is often used in practice, because it can better control layer2 broadcast to improve network security. This makes network more flexible and scalable.

Packet filtering is a function of firewall instead of VLAN.


Q4. Refer to the exhibit.

Which switch provides the spanning-tree designated port role for the network segment that services the printers?

A. Switch1

B. Switch2

C. Switch3

D. Switch4

Answer: C

Explanation:

Printers are connected by hubs. Decide the switch that provides the spanning-tree designated port role between Switch3 and Switch4. They have the same priority 32768. Compare their MAC addresses. Switch3 with a smaller MAC address will provide a designated port for printers.


Q5. A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? (Choose three.)

A. informational

B. emergency

C. warning

D. critical

E. debug

F. error

Answer: B,D,F

Explanation:

The Message Logging is divided into 8 levels as listed below:

Level Keyword Description 0

emergencies System is unusable 1

alerts

Immediate action is needed 2

critical

Critical conditions exist 3

errors

Error conditions exist

4

warnings

Warning conditions exist 5

notification

Normal, but significant, conditions exist 6

informational Informational messages 7

debugging Debugging messages

If you specify a level with the u201cloggingtrap levelu201d command, that level and all the higher levels will be logged. For example, by using the u201clogging trap 3 command, all the logging of emergencies, alerts, critical, and errors, will be logged.


Q6. What value is primarily used to determine which port becomes the root port on each nonroot switch in a spanning-tree topology?

A. path cost

B. lowest port MAC address

C. VTP revision number

D. highest port priority number

E. port priority number and MAC address

Answer: A

Explanation:

The path cost to the root bridge is the most important value to determine which port will become the root port on each non-root switch. In particular, the port with lowest cost to the root bridge will become root port (on non-root switch).


Q7. Refer to the exhibit.

A network administrator configures a new router and enters the copy startup-config running-config command on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enters the system configuration dialog as shown. What is the cause of the problem?

A. The network administrator failed to save the configuration.

B. The configuration register is set to 0x2100.

C. The boot system flash command is missing from the configuration.

D. The configuration register is set to 0x2102.

E. The router is configured with the boot system startup command.

Answer: A

Explanation:

The u201cSystem Configuration Dialogu201d appears only when no startup configuration file is found. The network administrator has made a mistake because the command u201ccopy startup-config running-configu201d will copy the startup config (which is empty) over the running config (which is configured by the administrator). So everything configured was deleted.

Note: We can tell the router to ignore the start-up configuration on the next reload by setting the register to 0u00d72142. This will make the u201cSystem Configuration Dialogu201d appear at the next reload.


Q8. Refer to the exhibit.

The network administrator must establish a route by which London workstations can forward traffic to the Manchester workstations. What is the simplest way to accomplish this?

A. Configure a dynamic routing protocol on London to advertise all routes to Manchester.

B. Configure a dynamic routing protocol on London to advertise summarized routes to Manchester.

C. Configure a dynamic routing protocol on Manchester to advertise a default route to the London router.

D. Configure a static default route on London with a next hop of 10.1.1.1.

E. Configure a static route on London to direct all traffic destined for 172.16.0.0/22 to 10.1.1.2.

F. Configure Manchester to advertise a static default route to London.

Answer: E

Explanation:

This static route will allow for communication to the Manchester workstations and it is better to use this more specific route than a default route as traffic destined to the Internet will then not go out the London Internet connection.


Q9. Refer to the exhibit.

The Bigtime router is unable to authenticate to the Littletime router. What is the cause of the problem?

A. The usernames are incorrectly configured on the two routers.

B. The passwords do not match on the two routers.

C. CHAP authentication cannot be used on a serial interface.

D. The routers cannot be connected from interface S0/0 to interface S0/0.

E. With CHAP authentication, one router must authenticate to another router. The routers cannot be configured to authenticate to each other.

Answer: B

Explanation:

With CHAP authentication, the configured passwords must be identical on each router. Here, it is configured as little123 on one side and big123 on the other.


Q10. Refer to the exhibit.

A technician is troubleshooting host connectivity issues on the switches. The hosts in VLANs 10 and 15 on Sw11 are unable to communicate with hosts in the same VLANs on Sw12. Hosts in the Admin VLAN are able to communicate. The port-to-VLAN assignments are identical on the two switches. What could be the problem?

A. The Fa0/1 port is not operational on one of the switches.

B. The link connecting the switches has not been configured as a trunk.

C. At least one port needs to be configured in VLAN 1 for VLANs 10 and 15 to be able to communicate.

D. Port FastEthernet 0/1 needs to be configured as an access link on both switches.

E. A router is required for hosts on SW11 in VLANs 10 and 15 to communicate with hosts in the same VLAN on Sw12.

Answer: B

Explanation:

In order for hosts in the same VLAN to communicate with each other over multiple switches, those switches need to be configured as trunks on their connected interfaces so that they can pass traffic from multiple VLANs.


100% Renew Cisco 200-125 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/200-125-dumps.html (New 573 Q&As)