2V0-642 Exam
The Secret of 2V0-642 exams
Want to know Testking 2V0-642 Exam practice test features? Want to lear more about VMware VMware Certified Professional 6 - Network Virtualization 6.2 Exam certification experience? Study Certified VMware 2V0-642 answers to Improved 2V0-642 questions at Testking. Gat a success with an absolute guarantee to pass VMware 2V0-642 (VMware Certified Professional 6 - Network Virtualization 6.2 Exam) test on your first attempt.
Q21. Which load balancing algorithm is only available on a vSphere Distributed Switch?
A. Route Based on Source MAC Hash
B. Route Based on Originating Virtual Port
C. Route Based on IP Hash
D. Route Based on Physical NIC Load
Answer: D
Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.networking.doc/GUID-959E1CFE-2AE4-4A67-B4D4- 2D2E13765715.html
Q22. An organization has PCI compliant application deployed as part of a larger NSX environment. Every year a team of contractors evaluates the security of the environment and recommends changes.
What NSX Role and Scope should the contractors be given to minimize access but still allow them to fulfill the staled requirement?
A. Security Administrator, No restrictions
B. Auditor. Limit access scope
C. NSX Administrator, Limit access scope
D. Enterprise Administrator, Limit access scope
Answer: B
Explanation: https://c368768.ssl.cf1.rackcdn.com/product_files/28022/original/VMware_SDDC_Validate d_Reference_Architecture_for_PCI_v3.0_June_2014b1844892b9e7e4c6aa280f5fd9df5a0f. pdf
Page 3
VMware NSX™ VMware NSX Edge™, VMware NSX Firewall, VMware NSX Router, VMware NSX Load
Balancer, and, VMware NSX Service Composer
Q23. In a Cross-vCenter environment where is information about local logical switches and local logical routers maintained?
A. Platform Services Controller
B. Local transport /one
C. Local Controller Cluster
D. Universal Controller Cluster
Answer: D
Q24. An NSX Edge Service Gateway has two interfaces:
• Internal interface named Internal Access
-- IP address = 10.10.10.1
-- Network mask = 255.255.255.0
• Uplink interface named Physical Uplink
-- IP address = 20.20.20.1
-- Network mask = 255.255.255.0
A vSphere administrator wants to add a SNAT rule to allow traffic from the internal network segment to access external resources via the uplink interface.
Which three steps should the vSphere administrator do to add the SNAT rule? (Choose three.)
A. Apply the SNAT rule to the Internal Access interface.
B. Select 10.10.10.1 as the translated source IP.
C. Apply the SNAT rule on the Physical Uplink interface.
D. Select 10.10.10.0/24 as the original subnet.
E. Choose 20.20.20.2 as the translated source IP address.
Answer: C,D,E
Q25. What is one of the benefits of a spine-leaf network topology?
A. A loop prevention protocol is not required
B. Automatic propagation of security policies to all nodes
C. Allows for VXl ANs to be defined in h traditional network topology
D. Network virtualization relies on spine leaf topologies to create logical switches
Answer: D
Q26. Which two options are correct regarding vSphere Distributed Switches? (Choose two )
A. A single vDS can span multiple vCenter Servers
B. A single host can be attached to multiple vDS
C. A single vDS can span multiple hosts across multiple clusters
D. A vDS is automatically created when a new 802.1Q trunk is configured
Answer: A,B
Q27. If the Applied To scope is set to Distributed Firewall, which virtual machines with have the firewall rule applied?
A. Only the virtual machines defined in the Source field.
B. Only virtual machines defined in the Destination field.
C. All virtual machines in a Datacenter.
D. All virtual machines on prepared hosts.
Answer: C
Explanation:
Referencehttp://www.routetocloud.com/2015/04/nsx-distributed-firewall-deep-dive/
Q28. What are the correct steps for connecting a virtual machine to a logical switch?
A. Select the logical switch, click the Add Virtual Machine Icon, select the VM, select the
vNIC to connect B. Select the Add Virtual Machine icon, select the logical switch, vNIC to connect
B. Select the logical switch, select the virtual machine, click the Add Virtual Machine .con. select the vNIC to connect
C. Select the vNIC, click the Add Virtual Machine Icon, select the logical switch
Answer: A
Explanation: https://docs.vmware.com/en/VMware-NSX-for-vSphere/6.2/com.vmware.nsx.admin.doc/GUID-571237B3-1665-4B92-A3A9- 51C078EC601D.html
Q29. Which tool is used to detect rogue services?
A. NSX Logical Firewall
B. NSX Logical Router
C. Activity Monitoring
D. Flow Monitoring
Answer: D
Q30. An NSX administrator is creating a filter as shown below.
What would be the purpose of creating a filter?
A. To quickly add a new rule.
B. To temporarily filter traffic.
C. To quickly remove a rule.
D. To quickly identify rules.
Answer: D