300-075 Exam
Foolproof 300 075 vce tips
Our pass rate is high to 98.9% and the similarity percentage between our cisco 300 075 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco cisco 300 075 exam in just one try? I am currently studying for the Cisco 300 075 dump exam. Latest Cisco cisco 300 075 Test exam practice questions and answers, Try Cisco 300 075 dump Brain Dumps First.
Q111. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What should the Called Party Transformation Pattern at the U.S. gateway be configured as?
A. \+.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: +
B. \+1.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None
C. \+408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: 1
D. \+1408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None
E. \+1.408! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None
Answer: D
Q112. Which option configures call preservation for H.323-based SRST mode?
A. voice service voip h323 call preserve
B. call preservation not possible with H.323
C. call-manager-fallback preserve-call
D. dial-peer voice 1 voip call preserve
Answer: A
Q113. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.)
A. Incorrect username and password
B. Wrong SIP domain configured.
C. User is not associated with the device.
D. IP or DNS name resolution issue.
E. CSF Device is not registered.
F. IP Phone DN not associated with the user.
Answer: B,D
Q114. Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder?
A. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060i
B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2i
C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service safprofile trunk-route 1session protocol sip interface Loopbackl transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1i
D. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!voice service saf!channel 1 vrouter SAF asystem 1
E. router eigrp SAF!service-family ipv4 autonomous-system 1!topology base exit-sf-topologyexit-service-family i
Answer: A
Q115. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
SRST
SRST-BR2 Config
BR2 Config
SRSTPSTNCall
After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Device Pool cannot be default.
B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
C. The router does not support SRST.
D. The SRST enabled router is not configured correctly.
Answer: A
Q116. Refer to the exhibit.
Which CSS is used at the HQ Cisco Unified Communications Manager to reroute calls via the PSTN when the SAF network is unavailable?
A. the phone device CSS
B. the phone line CSS
C. the phone line/device combined CSS
D. the SAF CSS configured on the CCD requesting service
E. the phone AAR CSS configured at the phone device
F. No special CSS is required. If SAF patterns are accessible, the PSTN reroute is automatic.
Answer: E
Q117. A voice-mail product that supports only the G.711 codec is installed in headquarters.
Which action allows branch Cisco IP phones to function with voice mail while using only the G.729 codec over the WAN link to headquarters?
A. Configure Cisco Unified Communications Manager regions.
B. Configure transcoding within Cisco Unified Communications Manager.
C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones.
D. Configure transcoder resources in the branch Cisco IP phones.
Answer: C
Q118. When you configure regions in a Cisco Unified Communications Manager multisite cluster, which two are ways to prevent G.722 from being advertised in the cluster? (Choose two.)
A. modify the service parameter
B. modify the enterprise parameter
C. modify the device pool
D. modify the line settings
Answer: A,B
Q119. What user profile is used to define the settings for a user on login?
A. Device Profile
B. Group Profile
C. Pool Profile
D. Specific Profile
Answer: A
Q120. When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco VCS Control, which portion of the destination URI is the first match that is attempted?
A. the full URI, including the domain portion
B. the destination alias, without the domain portion
C. the E.164 number that is assigned to the Cisco TelePresence EX90
D. the directory number that is assigned to the Cisco TelePresence EX90
Answer: B