300-075 Exam
Super ways to 300 075 dump
Examcollection offers free demo for cisco 300 075 exam. "Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)", also known as cisco 300 075 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300 075 vce exam, will help you answer those questions. The 300 075 vce Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300 075 ciptv2 exams and revised by experts!
Q131. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
SRST
SRST-BR2 Config
BR2 Config
SRSTPSTNCall
After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN. Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)
A. dial-peer voice 1 potsincoming called-number 228822…direct-inward-dialport 0/0/0:15
B. dial-peer voice 1 potsincoming called-number 228822…direct-inward-dialport 0/0/0:13
C. voice translation-rule 1rule 1 /228821 …$/ /+44&/exit!voice translation-profile pstn-intranslate called 1!voice-port 0/0/0:15translation-profile incoming pstn-in
D. voice translation-rule 1rule 1 /228822…$/ /+44&/exit!voice translation-profile pstn-intranslate called 1!voice-port 0/0/0:15translation-profile incoming pstn-in
E. The router does not need to be configured
Answer: A,D
Q132. How many active gatekeepers can you define in a local zone?
A. 1
B. 2
C. 5
D. 10
E. 15
F. unlimited
Answer: A
Q133. While operating in SRST, what is needed to route calls outside of the remote site location to the PSTN?
A. SIP trunk
B. CallManager route patterns
C. translation patterns
D. POTS dial peers
E. VOIP dial peers
Answer: D
Explanation:
Incorrect Answer: A, B, C, E
in time of srst configuration on router, please configure a dial-peer so that call flow in SRST mode.
Q134. Which two options are valid service parameter settings that are used to set up proper video QoS behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.)
A. DSCP for Video Calls when RSVP Fails
B. Default Intraregion Min Video Call Bit Rate (Includes Audio)
C. Default Interregion Max Video Call Bit Rate (Includes Audio)
D. DSCP for Video Signaling
E. DSCP for Video Signaling when RSVP Fails
Answer: A,C
Q135. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A
Q136. Which two statements regarding you configuring a traversal server and traversal client relationship are true? (Choose two.)
A. VCS supports only the H.460.18/19 protocol for H.323 traversal calls.
B. VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls.
C. VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls.
D. If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client to the traversal server for SIP signaling.
E. A VCS Expressway located in the public network or DMZ acts as the firewall traversal client.
Answer: B,D
Q137. Which statement about the function of a gatekeeper is true?
A. A gatekeeper improves call routing between servers within a single Cisco Unified Communications Manager cluster.
B. A gatekeeper can replace the dial plan of a Cisco Unified Communications Manager cluster.
C. A gatekeeper can simplify the dial plan between many different Cisco Unified Communications Manager clusters.
D. Gatekeepers can be implemented to deploy RSVP-based CAC.
Answer: C
Q138. When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries to log in to Cisco Extension Mobility?
A. The login will fail because only a single Cisco Extension Mobility profile is allowed.
B. The user must select the desired profile.
C. The user must login to both profiles in the order they are presented.
D. The user may login to both profiles in any order.
E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled.
Answer: B
Explanation:
Incorrect Answer: A, C, D, E Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco Unified IP Phone and then entering login information in the form of a Cisco Unified Communications Manager UserID and a Personal Identification Number (PIN). If a user has more than one user device profile, a prompt displays on the phone and asks the user to choose a device profile for use with Cisco Extension Mobility. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsem.html
Q139. Assume that local route groups are configured. When an IP phone moves from one device mobility group to another, which two configuration components are not changed? (Choose two.)
A. IP subnet
B. user settings
C. SRST reference
D. region
E. phone button settings
Answer: B,E
Explanation:
Incorrect Answer: A, C, D Although the phone may have moved from one subnet to another, the physical location and associated services have not changed. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsdevmob.html#wp1137460
Q140. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs?
A. Media Resource Group List
B. Device Pool
C. Location
D. AAR Group
E. Calling Search Space
Answer: E
Explanation:
A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call.