300-075 Exam
Foolproof 300 075 vce tips
Our pass rate is high to 98.9% and the similarity percentage between our 300 075 ciptv2 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 ciptv2 exam in just one try? I am currently studying for the Cisco 300 075 ciptv2 exam. Latest Cisco 300 075 vce Test exam practice questions and answers, Try Cisco 300 075 vce Brain Dumps First.
Q91. In a Centralized Call processing architecture, you have deployed Extension Mobility (EM) feature. After the deployment of EM, when one of the end-users tries to login to the IP phone, the Error 25 is displayed on the screen. What three things should you do to resolve this issue? (Choose three.)
A. upgrade the firmware of the IP Phone to the latest version
B. activate EM feature service under Cisco Unified Serviceability
C. associate EM Device profile with the end-user
D. subscribe the MAC address of the IP Phone to EM Service
E. update EM Phone Service URL to point to the publisher
F. subscribe device profile to EM phone service in case the enterprise subscription of EM Service is disabled
Answer: B,C,D
Q92. Company A has deployed a VCS Control and is attempting to register a third-party endpoint. The engineer has confirmed that no traffic is being blocked for the endpoint and it is receiving a valid IP address. Which option could be the cause of this registration failure?
A. Third-party endpoints are not compatible with VCS Control, only with VCS Expressway.
B. Cisco Unified Communications Manager is required in addition to the VCS Control.
C. An incorrect SIP domain is configured on the VCS Control for the endpoint.
D. The VCS Control must be deployed together with VCS Expressway before endpoints can register to either one.
Answer: C
Q93. Refer to the exhibit
When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised?
A. 2XXX and the T0D1D will be 0:+498950555
B. 2XXX and the ToDID will be 0:+4989531 21
C. 4989S05552XXX and the ToDiD will be 0:
D. + 4989631 21 2XXX and the ToDiD will be 0:
E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0:
Answer: A
Explanation:
Incorrect Answer: B, C, D, E PSTN failover prepend digit is +498950555 Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fscallcontrol discovery.html
Q94. Which option is a benefit of implementing CFUR?
A. CFUR is designed to initiate TEHO to reduce toll charges.
B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.
Answer: C
Q95. Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two.)
A. Calling-party numbers are routed from the gateway or trunks to phones.
B. Called-party numbers are routed from the gateway or trunks to phones.
C. Calling-party numbers of internal calls are routed from the gateway or trunks.
D. Calling-party calls are routed to the gateway and trunks.
Answer: A,D
Q96. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DNS Servers
Device Pool
Expressway
ILS
Locations
MRA
Speed Dial
SIP Trunk
Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.)
A. The DNS server has the wrong IP address.
B. The internal DNS Service (SRV) records need to be updated on the DNS Server.
C. Flush the DNS Cache on the client.
D. The DNS AOR records are wrong.
E. Add the appropriate DNS SRV for the Internet entries on the DNS Server.
Answer: B,C,E
Q97. Refer to the exhibit:
The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified Communications Manager.
Which minimum configuration for a Cisco Unified Communications Manager Express SAF Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder?
A. router eigrp SAFiservice-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-familyvoice service safprofile trunkroute 1session protocol sip interface Loopback1 transport tcp port 5060!
B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit- service-family!voice service safprofile trunk-route 1session protocol sip interface Loopback1 transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1!
C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!
D. None of above configurations contain sufficient information.
Answer: C
Explanation:
Incorrect Answer: A, B, D only following configuration is enough router eigrp SAF service-family ipv4 autonomous-system 1 exit-service-family link:
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps10822/whitepaper_c11-636604.html
Q98. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DNS Servers
Device Pool
Expressway
ILS
Locations
MRA
Speed Dial
SIP Trunk
What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.)
A. Media Resource Group List.
B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.
Answer: B,D
Q99. Refer to the exhibit.
The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number.
Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
How many route lists and route groups should be configured for AAR at a minimum?
A. a single route list with a local route group for each site
B. two route lists and two route groups for each site
C. a single route list and four route groups for each site
D. None. The AAR CSS can point directly to the route pattern.
Answer: A
Q100. How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations?
A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager.
B. RSVP enables AAR within Cisco Unified Communications Manager.
C. RSVP is topology aware.
D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR.
Answer: C