getcertified4sure.com

Getting Smart with: cisco 300 075




Cause all that matters here is passing the Cisco 300 075 pdf exam. Cause all that you need is a high score of 300 075 pdf Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam. The only one thing you need to do is downloading Ucertify cisco 300 075 exam study guides now. We will not let you down with our money-back guarantee.

Q41. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 


Q42. You are entering the description for the Service Advertisement Framework forwarder. 

Which three characters should you avoid entering in the description? (Choose three.) 

A. < > 

B. & 

C. % 

D. # 

E. $ 

F. @ 

Answer: A,B,C 


Q43. Refer to the exhibit. 

With the Mobile Connect feature configured, when the PSTN phone calls the Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS is responsible for ensuring that the correct partitions are accessed when calls are sent to the Enterprise user's mobile phone? 

A. the gateway CSS 

B. the Phone Device CSS 

C. the Remote Destination Profile CSS 

D. the Remote Destination Profile Rerouting CSS 

E. the Phone Line (DN)CSS 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E 

Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmfeat/fsmobmgr .html 


Q44. Which of the following are two functions that ensure that the telephony capabilities stay operational in the remote location Cisco Unified SRST router? (Choose two) 

A. Automatically detecting a failure in the network. 

B. Initiating a process to provide call-processing backup redundancy. 

C. Notifying the administrator of an issue for manual intervention. 

D. Proactively repairing issues in the voice network. 

Answer: A,B 


Q45. If your IP telephony administrator asks you to configure a local zone for your dial plan to control the volume of calls between two end points in a centralized multisite environment, which two types of Call Admission Control can be implemented? (Choose two.) 

A. locations based 

B. automated alternate routing 

C. gatekeeper based 

D. SRST 

E. Cisco Unified Communications Manager based 

Answer: A,B 

Explanation: 

Incorrect Answer: C, D, E Location-based call admission control (CAC) manages WAN link bandwidth in Cisco Unified Communications Manager. Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1067747 


Q46. Which statement about technology implementation strategy is true? 

A. Cisco Unified Communications Manager Express can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. 

B. Cisco Unified Communications Manager Express in SRST mode can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. 

C. SRST can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. 

D. SRST and MGCP fallback can be configured to function with no Cisco Unified Communications Manager cluster in the enterprise. 

Answer:


Q47. Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder? 

A. show eigrp service-family ipv4 clients 

B. show eigrp address-family ipv4 clients 

C. show voice saf dndb all 

D. show saf registration 

E. show ip saf registration 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E show eigrp service-family ipv4 clients Displays information from the EIGRP IPv4 service-family results. 


Q48. A Cisco Unified Communications Manager cluster is installed in headquarters only. 

How can international calls be blocked while national calls are allowed for branch office Cisco IP Phones during a WAN failure? 

A. Configure CSS and partitions in Cisco Unified Communications Manager and apply the CSS and partitions to the SRST ISR. 

B. Configure CSS and partitions in the SRST ISR. 

C. Configure COR in the SRST ISR. 

D. Configure voice translations in the SRST ISR. 

Answer:


Q49. Refer to the exhibit. A user in RTP calls a phone in San Jose during congestion with Call Forward No Bandwidth (CFNB) configured to reach cell phone 4085550150. The user in RTP sees the message "Not Enough Bandwidth" on their phone and hears a fast busy tone. Which two conditions can correct this issue? (Choose two.) 

A. The calling phone (RTP) needs to have AAR Group value of AAR under the AAR Settings. 

B. The called phone (San Jose) needs to have AAR Group value of AAR under the AAR Settings. 

C. The calling phone (RTP) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings. 

D. The calling phone (RTP) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings. 

E. The called phone (San Jose) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings. 

F. The called phone (San Jose) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings. 

Answer: B,F 

Explanation: 

Incorrect Answer: A, C, D, E Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml 


Q50. Refer to the exhibit. 

What should the destination IP address be configured as on the HQ and BR1 SIP trunks? 

A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10. 

B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes. 

C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves. 

D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. 

Answer:

Explanation: 

Incorrect Answer: A, C, D 

The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html