300-075 Exam
Why You Need To 300 075 pdf?
Want to know Exambible 300 075 pdf Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Printable Cisco 300 075 pdf answers to Renewal 300 075 vce questions at Exambible. Gat a success with an absolute guarantee to pass Cisco 300 075 ciptv2 (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.
Q21. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
DP
Locations
CSS
Movi Failure
Movi Settings
CIPTV Topo
Subzone
Links
Pipe
What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.)
A. Incorrect username and password
B. Wrong SIP domain configured.
C. User is not associated with the device.
D. IP or DNS name resolution issue.
E. CSF Device is not registered.
F. IP Phone DN not associated with the user.
Answer: B,D
Q22. Which task must you perform before deleting a transcoder?
A. Delete the dependency records.
B. Unassign it from a media resource group.
C. Use the Reset option.
D. Remove the device pool.
E. Remove the subunit.
F. Delete the common device configuration.
Answer: B
Q23. Refer to the exhibit.
If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.)
A. The physical locations are not different, so the configuration of the phone is not modified.
B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied.
C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.
D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm.
E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone.
Answer: B,C
Q24. Refer to the exhibit.
How many calls can be placed to Cluster B?
A. three G.729 calls
B. one G.711 call
C. one G.711 and three G.729 calls
D. There is no limit for incoming calls to Cluster B. Outgoing calls are limited to one G.711 and three G.729 calls.
Answer: A
Q25. Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.)
A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node.
Answer: A,D
Q26. Which three devices support the SAF Call Control Discovery protocol? (Choose three.)
A. Cisco Unified Border Element
B. Cisco Unity Connection
C. Cisco IOS Gatekeeper
D. Cisco Catalyst Switch
E. Cisco IOS Gateway
F. Cisco Unified Communications Manager
Answer: A,E,F
Q27. The VCS Expressway can be configured with security controls to safeguard external calls and endpoints. One such option is the control of trusted endpoints via a whitelist. Where is this option enabled?
A. on the voice-enabled firewall at the edge of the network
B. on the VCS under Configuration > registration > configuration
C. on the TMS server under Registrations > whitelist
D. on the VCS under System > configuration > Registrations
Answer: B
Q28. Which three commands are necessary to override the default CoS to DSCP mapping on interface Fastethernet0/1? (Choose three.)
A. mls qos map cos-dscp 0 10 18 26 34 46 48 56
B. mls qos map dscp-cos 8 10 to 2
C. mls qos
D. interface Fastethernet0/1mls qos trust cos
E. interface Fastethernet0/1mls qos cos 1
F. interface Fastethernet0/2mls qos cos 1
Answer: A,C,D
Q29. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41?
A. Set QoS mode to DiffServ and tag value 32.
B. Set QoS mode to IntServ and tag value to 34.
C. Set QoS mode to DiffServ and tag value 34.
D. Set QoS mode to IntServ and tag value to 32.
E. Set QoS mode to ToS and tag value to 32.
Answer: C
Q30. You are deploying a Cisco Unified Communications Manager solution with MGCP gateways at multiple locations. Which firewall and ACL configuration must you perform to allow the MCGP gateways to function correctly?
A. Allow access to TCP port 2428.
B. Block TCP port 1720.
C. Open access to all TCP and UDP ports.
D. Allow access to TCP port 1720.
E. Block access to TCP ports 2427 and 2428.
Answer: A