300-075 Exam
The only cisco 300 075 resources for you
Proper study guides for Down to date Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certified begins with Cisco 300 075 dump preparation products which designed to deliver the Exact cisco 300 075 questions by making you pass the 300 075 pdf test at your first time. Try the free 300 075 vce demo right now.
Q1. Refer to the following exhibits.
Users in the U.S dial Germany by calling 9011 49 followed by the remaining digits. What would be the most suitable configuration for Connection X?
A. Configure a SIP trunk to 10.140.1.1 and a SIP route pattern +49T in Cisco Unified Communications Manager.
B. Configure a SIP trunk to the Cisco Unified Border Element and route pattern +49T in Cisco Unified Communications Manager.
C. configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for 9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk.
D. Configure a SIP trunk to the ITSP. Configure a translation pattern for 9011.49T using DDI predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk.
Answer: C
Explanation:
Incorrect Answer: A, B, D SIP trunks for public switched telephone network (PSTN) access are an important new access method for business collaboration. Service providers throughout the world offer SIP trunking as an alternative to traditional TDM (T1/E1) connections. A discard digits instruction (DDI) removes a portion of the dialed digit string before passing the number on to the adjacent system. A DDI must remove portions of the digit string, for example, when an external access code is needed to route the call to the PSTN, but the PSTN switch does not expect that access code.
Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03rp.html
Q2. Refer to the following exhibit.
Which Cisco IOS SAF Forwarder configuration is correct?
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: A
Explanation:
Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below
1. enable
2. configure terminal
3. router eigrp virtual-instance-name
4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number
5. topology base
6. external-client client_label
7. exit-sf-topology
8. exit-service-family
9. exit
10. service-family external-client listen {ipv4 | ipv6} tcp_port_number
11. external-client client-label
12. username user-name
13. password password-name
14.
Q3. Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with video endpoints registered on both systems. Users find that video endpoints registered on Call manager can call each other and likewise for the endpoints registered on the VCS server. The administrator for Company X realizes he needs a SIP trunk between the two systems for any video endpoint to call any other video endpoint. Which two steps must the administrator take to add the SIP trunk? (Choose two.)
A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco UCM to communicate.
Answer: A,C
Q4. What is a prerequisite of AAR deployment?
A. You must have a single distributed call processing deployment.
B. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.
C. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.
D. Clustering must be implemented over the WAN.
E. You must have a centralized call processing deployment.
Answer: E
Q5. Which component of Cisco Unified Communications Manager is responsible for sending keepalive messages to the Service Advertisement Framework forwarder?
A. Call Control Discovery requesting service
B. Hosted DNs service
C. Service Advertisement Framework client control
D. Cisco Unified Communications Manager database
E. Service Advertisement Framework-enabled trunk
F. gatekeeper
Answer: C
Q6. Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls.
Which action routes the 11th call through the PSTN?
A. Configure an SIP trunk to the ISR.
B. Configure Cisco Unified Communications Manager AAR.
C. Configure Cisco Unified Communications Manager RSVP-enabled locations.
D. Configure Cisco Unified Communications Manager locations.
Answer: B
Q7. Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco IP Telephony Authentication and Encryption Fundamentals)
A. CAPF enrollment supports the use of authentication strings.
B. The CAPF itself has to enroll with the Cisco CTL client.
C. LSCs are issued by the Cisco CTL client or by the CAPF.
D. MICs are issued by the CAPF itself or by an external CA.
Answer: A
Explanation:
Incorrect Answer: B, C, D
The CAPF enrollment process is as follows:
1. The IP phone generates its public and private key pairs.
2. The IP phone downloads the certicate of the CAPF and uses it to establish a TLS session with the CAPF.
3. The IP phone enrolls with the CAPF, sending its identity, its public key, and an optional authentication string.
4. The CAPF issues a certicate for the IP phone signed with its private key.
5. The CAPF sends the signed certicate to the IP phone.
Link: http://my.safaribooksonline.com/book/certification/cipt/9781587052613/understanding-cisco-ip-telephony-authentication-and-encryption-fundamentals/584.
Q8. Which two features require or may require configuring a SIP trunk? (Choose two.)
A. SIP gateway
B. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
C. Cisco Device Mobility
D. Cisco Unified Mobility
E. registering a SIP phone
Answer: A,B
Explanation:
Incorrect Answer: C, D, E All protocols require that either a signaling interface (trunk) or a gateway be created to accept and originate calls. Device mobility allows Cisco Unified Communications Manager to determine whether the phone is at its home location or at a roaming location. Cisco Unified Mobility gives users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to different designated phones, such as cellular phones. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html# wpxref77849
Q9. What impact do roaming-sensitive settings and Device Mobility settings have on call routing?
A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS.
Answer: D
Q10. Which statement about H.323 Gatekeeper Call Admission Control is true?
A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications deployments that use locations based Call Admission Control.
B. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications deployments.
C. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications Express deployments.
D. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications Manager.
Answer: B
Explanation:
Incorrect Answer: A, C, D in distributed call processing deployments on a simple hub-and-spoke topology, you can implement call admission control with a Cisco IOS gatekeeper. In this design, the call processing agent (which could be a Unified CM cluster, Cisco Unified Communications Manager Express (Unified CME), or an H.323 gateway) registers with the Cisco IOS gatekeeper and queries it each time the agent wants to place an IP WAN call. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cac.html#wp1044743