Q1. Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.

The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

SX20 System information:

DX650 Configuration:

MRGL:

DP:

Locations:

AARG:

CSS:

Movi Failure:

Movie Settings:

A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications Manager, but is not registering properly. What is causing this failure?

A. Device Pool cannot be default.

B. The DX650 is the incorrect calling search space.

C. The DX650 Phones does not support SIP.

D. The location Hub_None has not been activated.

E. The DX650's MAC address is incorrect in the Cisco UCM.

Q2. An administrator is setting up analog phones that connect to a Cisco VG310. Which type of gateway or trunk on Cisco Unified Communication Manager for the Cisco VG310 must the administrator set up to allow the phones to have the call pickup feature?

A. H.323 gateway

B. SCCP gateway

C. H.225 trunk

D. MGCP gateway

E. SIP trunk

Q3. While troubleshooting a connectivity issue between Cisco Unified Communications Manager,

Expressway-C, and Expressway-E, an engineer sees this output in the Expressway-E logs.

Event=u201dAuthentication Failedu201d Service=u201dSIPu201d Src-ip=u201d10.50.2.1u201d

Src-port=u201d25723u201d Detail=u201dIncorrect authentication credential for useru201d

Protocol u201cTLSu201d Method=u201dOPTIONSu201d Level=u201d1u201d

What is the cause of this issue?

A. The Expressway-C Traversal Server username/password do not match the Expressway-E Traversal Zone username/password.

B. The Expressway-C Traversal Client username/password do not match the Expressway-E Traversal Server username/password.

C. The Expressway-C Traversal Zone username/password do not match the Expressway-E Traversal

Zone username/password.

D. The Expressway-C Traversal Zone username/password do not match the Expressway-E Traversal Client username/password.

E. The Expressway-C Traversal Server username/password do not match the Expressway-E Traversal Client username/password.

Q4. When configuring intercluster URI dialing, an engineer gets the error message u201cLocal cluster cannot connect to the ILS networku201d. Which three reasons for this error are true? (Choose three.)

A. The SIP route patterns have not been properly configured.

B. The Tomcat certificates do not match.

C. The Cisco Unified Resource Identifier service needs a restart.

D. The ILS authentication password does not match.

E. The cluster ID does not match.

F. One cluster is using TLS certificate, and the other is using Password.

Q5. An engineer must ensure that a device register to Cisco VCSC. Which protocol accomplish this task?

A. H.260

B. H.264

C. MGCP

D. SIP

Q6. How is the peer address configured when ExpresswayE has only one NIC enabled and is using static NAT mode?

A. Expressway-E DHCP

B. Cisco Unified Communications Manager DHCP

C. Expressway-E FQDN

D. Cisco Unified Communications Manager FQDN

Q7. The VCS Expressway can be configured with security controls to safeguard external calls and endpoints. One such option is the control of trusted endpoints via a whitelist.

Where is this option enabled?

A. on the voice-enabled firewall at the edge of the network

B. on the VCS under Configuration > registration > configuration

C. on the TMS server under Registrations > whitelist

D. on the VCS under System > configuration > Registrations

Q8. Scenario:

There are two call control systems in this item.

The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.

The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

DP:

Locations:

CSS:

Movie Failure:

Movie Settings:

CIPTV2 Topology:

Subzone:

Links:

Pipe:

Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can't make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?

A. Wrong username and/or password.

B. Wrong SIP domain name.

C. The TMSPE is not working.

D. The bandwidth is incorrectly configured.

Q9. An engineer must enable video desktop sharing between a Cisco Unified Communications Manager registered video endpoint and a Cisco VCS registered video endpoint. Which protocol must be enabled in SIP profile for VCS SIP trunk on Cisco Unified Communications Manager?

A. RDP

B. H.264

C. H.224

D. H.263

E. BFCP

Q10. Which action configures phones in site A to use G.711 to site B, but uses G.729 to site C?

A. Configure Cisco Unified Communications Manager regions.

B. Configure Cisco Unified Communications Manager locations.

C. Configure transcoder resources in Cisco Unified Communications Manager.

D. Configure a gatekeeper.