70-410 Exam
What Far out 70-410 Is?
Our Microsoft Microsoft study guides are available throughout Pdf forms which are printed along with convenient to make use of. You can carry these people with an individual whenever along with whenever youd such as to. We are certain you will always be armed with the most recent and most useful Microsoft 70-410 training materials. All the Microsoft 70-410 questions along with answers are customized around the basis of the actual exam syllabus. You wont pass from the Microsoft 70-410 certification. Our Microsoft test engine gives some visualized scenarios which usually you will encounter in the Microsoft 70-410 true exam. Our Microsoft 70-410 exam dumps can polish your abilities and brain.
2021 Mar 70-410 test
Q11. - (Topic 2)
Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following table.
You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets.
Which command should you run?
A. route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
B. route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
C. route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
D. route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
Answer: B
Explanation:
These parameters will allow communication with all the hosts.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6
addressing, p.192, 196
Q12. - (Topic 1)
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2.
You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve single-label names to IP addresses.
What should you do first?
A. Create a reverse lookup zone.
B. Convert the contoso.com zone to an Active Directory-integrated zone.
C. Configure dynamic updates for contoso.com.
D. Create a GlobalNames zone.
Answer: B
Explanation:
Although a GlobalNames zone is required in order to resolve single-label names, GNZs
must be AD-integrated.
Since this is a standard primary zone (as opposed to an ADDS primary zone), we must first
integrate the zone into Active Directory.
References:
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.3: Deploy and Configure the
DNS service, p.233
http://technet.microsoft.com/en-us/library/cc731744.aspx
Q13. - (Topic 1)
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The domain contains four domain controllers. The domain controllers are configured as shown in the following table.
All domain controllers are DNS servers.
You plan to deploy a new domain controller named DC5 in the contoso.com domain.
You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully to a domain controller.
Which domain controller should you identify?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: D
Explanation:
Relative ID (RID) Master: Allocates active and standby RID pools to replica domain controllers in the same domain. (corp.contoso.com). Must be online for newly promoted domain controllers to obtain a local RID pool that is required to advertise or when existing domain controllers have to update their current or standby RID pool allocation. The RID master is responsible for processing RID pool requests from all domain controllers in a particular domain. When a DC creates a security principal object such as a user or group, it attaches a unique Security ID (SID) to the object. This SID consists of a domain SID (the same for all SIDs created in a domain), and a relative ID (RID) that is unique for each security principal SID created in a domain. Each DC in a domain is allocated a pool of RIDs that it is allowed to assign to the security principals it creates. When a DC’s allocated RID pool falls below a threshold, that DC issues a request for additional RIDs to the domain’s RID master. The domain RID master responds to the request by retrieving RIDs from the domain’s unallocated RID pool and assigns them to the pool of the requesting DC At any one time, there can be only one domain controller acting as the RID master in the domain.
The Infrastructure Master – The purpose of this role is to ensure that cross-domain object references are correctly handled. For example, if you add a user from one domain to a security group from a different domain, the Infrastructure Master makes sure this is done properly. As you can guess however, if your Active Directory deployment has only a single domain, then the Infrastructure Master role does no work at all, and even in a multi-domain environment it is rarely used except when complex user administration tasks are performed, so the machine holding this role doesn’t need to have much horsepower at all.
Q14. - (Topic 3)
Your company has a remote office that contains 1,600 client computers on a single subnet. You need to select a subnet mask for the network that will support all of the client
computers. The solution must minimize the number of unused addresses. Which subnet mask should you select?
A. 255.255.248.0
B. 255.255.252.0
C. 255.255.254.0
D. 255.255.240.0
Answer: A
Q15. HOTSPOT - (Topic 1)
You have a DHCP server named Server1 that runs Windows Server 2012 R2. On Server1, you run the commands as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Improved 70-410 exam prep:
Q16. HOTSPOT - (Topic 2)
You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.
Answer:
Q17. - (Topic 3)
You perform a Server Core Installation of window Server 2012 R2 on server named Server1.
You need to add a graphical user interface (GUI) to server1. Which tool should you use?
A. the Add-WindowsFeature cmdlet
B. the Install-Module cmdlet
C. the setup.exe command
D. the Add-WindowsPackage cmdlet
Answer: A
Q18. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?
A. From Server Manager, change the load balancing mode of Team1.
B. Run the New-NetLbfoTeam cmdlet.
C. From Server Manager, add an interface to Team1.
D. Run the Add-NetLbfoTeamMember cmdlet.
Answer: C
Q19. - (Topic 3)
A company’s server security team needs a solution that will prevent users from installing and using unauthorized applications on their Windows 8 desktop computers.
Which technology should the team choose?
A. Starter GPOs
B. Group Policy Objects
C. Software Restriction Policies
D. AppLocker
Answer: D
Explanation:
AppLocker (Application Locker) can help prevent malicious (malware) and unsupported
applications from affecting computers. These include executable files, scripts, Windows
Installer files, DLLs, Packaged apps and Packaged app installers.
Quick Tip: AppLocker is also supported by Windows Server 2008 R2 and Windows 7.
Q20. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
In the perimeter network, you install a new server named Server1 that runs Windows Server 2012 R2. Server1 is in a workgroup.
You need to perform an offline domain join of Server1 to the contoso.com domain.
What should you do first?
A. Transfer the PDC emulator role to Dc1.
B. Run the djoin.exe command.
C. Run the dsadd.exe command.
D. Transfer the infrastructure master role to DC1.
Answer: B
Explanation:
A. Creates a new Active Directory computer.
B. Use djoin for offline join in the perimeter network
C. Adds specific types of objects to the directory.
D. Add the local computer to a domain or workgroup.