70-410 Exam
The Replace Guide To 70-410 braindump Apr 2021
Cause all that matters here is passing the Microsoft 70-410 exam. Cause all that you need is a high score of 70-410 Installing and Configuring Windows Server 2012 exam. The only one thing you need to do is downloading Ucertify 70-410 exam study guides now. We will not let you down with our money-back guarantee.
2021 Apr 70-410 exam cram
Q41. - (Topic 3)
You work as a senior administrator at Lead2pass.com. The Lead2pass.com network consists of a single domain named Lead2pass.com. All servers on the Lead2pass.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing storage pools.
Which of the following are TRUE with regards to storage pools?
A. It allows you to group physical disks into one or more containers.
B. It prevents you from grouping physical disks into one or more containers.
C. It allows you to easily add storage with minor impact on users.
D. It allows you to easily add storage without impacting users.
Answer: A,D
Q42. - (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
You need to configure VM4 to track the CPU, memory, and network usage.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring K. Single-root I/O virtualization
Answer: C
Explanation:
Metrics collected for each virtual machine using resource metering: Average CPU usage, measured in megahertz over a period of time. Average physical memory usage, measured in megabytes. Minimum memory usage (lowest amount of physical memory). Maximum memory usage (highest amount of physical memory). Maximum amount of disk space allocated to a virtual machine. Total incoming network traffic, measured in megabytes, for a virtual network adapter. Total outgoing network traffic, measured in megabytes, for a virtual network adapter
: http://blogs.technet.com/b/meamcs/archive/2012/05/28/hyper-v-resource-metering-in-windows-server-2012-server-8-beta.aspx
Q43. - (Topic 3)
You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed. You attach four 500-GB disks to Server1. You need to configure the storage to meet the following requirements:
. Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years. . Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years. . The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications. . The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From File and Storage Services, create a storage pool that uses all four disks.
C. From Disk Management, create two new mirror volumes that use two disks each.
D. From Disk Management, create a new RAID-5 volume that uses all four disks.
E. From File and Storage Services, create virtual disks by using thin provisioning.
Answer: B,E
Q44. DRAG DROP - (Topic 3)
You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. VM1 is currently running. VM1 has a snapshot that was created two weeks ago.
You plan to use Server2 to perform a forensic analysis of the contents of the disk of VM1 from two weeks ago.
You need to ensure that you can view the contents of the disk of VM1 from two weeks ago from Server2.
Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q45. - (Topic 1)
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM “VM6 | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM “VM5 I Set-VMNetworkAdapter -IovWeight 0
C. Get-VM “VM5 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “VM6 | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM “VM6 | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM “VM5 | Set-VMNetworkAdapter -AllowTeaming On
Answer: C,E
Explanation:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination. . If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets. . If set to Destination, it receives copied packets from the source virtual network adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
Reference: http://technet.microsoft.com/en-us/library/hh848457.aspx
Improved 70-410 practice test:
Q46. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.VM1 has a legacy network adapter.
You need to assign a specific amount of available network bandwidth to VM1.
What should you do first?
A. Remove the legacy network adapter, and then run the Set-VMNetworkAdapter cmdlet.
B. Add a second legacy network adapter, and then run the Set-VMNetworkAdopter cmdlet
C. Add a second legacy network adapter, and then configure network adapter teaming.
D. Remove the legacy network adapter, and then add a network adapter
Answer: D
Explanation:
A. Set-VMNetworkAdaptercmdlet configures features of the virtual network adapter in a virtual machine or the management operating system
B. The legacy network adapter doesn’t support bandwidth management
C. The legacy network adapter doesn’t support bandwidth management
D. Add a New network adapter The legacy network adapter doesn’t support bandwidth management
Q47. - (Topic 3)
You have an existing Active Directory site named Site1. You create a new Active Directory site and name it Site2. You need to configure Active Directory replication between Site1 and Site2. You install a new domain controller.
You create the site link between Site1 and Site2.
What should you do next?
A. Use the Active Directory Sites and Services console to configure a new site link bridge object.
B. Use the Active Directory Sites and Services console to decrease the site link cost between Site1 and Site2.
C. Use the Active Directory Sites and Services console to assign a new IP subnet to Site2. Move the new domain controller object to Site2.
D. Use the Active Directory Sites and Services console to configure the new domain controller as a preferred bridgehead server for Site1.
Answer: C
Explanation:
Inter-site Replication
The process of creating a custom site link has five basic steps:
1. Create the site link.
2. Configure the site link’s associated attributes.
3. Create site link bridges.
4. Configure connection objects. (This step is optional.)
5. Designate a preferred bridgehead server. (This step is optional)
Q48. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.All domain controllers are configured as DNS servers.
On Server1, you open Server Manager and you add DC2 as another server to manage.
From Server Manager on Server1, you right-click DC2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click DC2, you see the option to run DNS Manager.
What should you do?
A. On Server1, install the Role Administration Tools.
B. In the domain, add Server1 to the DNS Admins group.
C. On DC2 and Server1, run winrmquickconfig.
D. On DC2, install the Feature Administration Tools.
Answer: A
Explanation:
The Domain Name System (DNS) role is a role that provides a standard method for associating names with numeric Internet addresses. This lets users refer to network computers by using easy-to-remember names instead of a long series of numbers. Windows DNS services can be integrated with DHCP services, eliminating the need to add DNS records as computers are added to the network.
Q49. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):
You need to use DSC to configure Server1 as defined in the configuration.
What should you run first?
A. Service1
B. Configuration1
C. Start DscConfiguration
D. Test-DscConfigu ration
Answer: B
Q50. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a user account named User1 that resides in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to publish several applications to a user named User1.
In the Users container, you create a new user named User2.
You need to ensure that the same applications are published to User2.
What should you do?
A. Modify the settings in GPO1.
B. Move User2 to OU1
C. Link a WMI filter to GPO1.
D. Modify the security of GPO1.
Answer: B
Explanation:
Moving User2 to OU1 will give him the same access as User1.
The GPO is linked to OU1. By moving User2 to OU1 the GPO will be applied to this user.