70-410 Exam
[Rebirth] 70 410 practice exam
It is impossible to pass Microsoft mcsa 70 410 pdf exam without any help in the short term. Come to Pass4sure soon and find the most advanced, correct and guaranteed Microsoft examcollection 70 410 practice questions. You will get a surprising result by our Most recent Installing and Configuring Windows Server 2012 practice guides.
Q131. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1.
You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1.
You join Computer1 to the domain.
You need to prevent App1 from running on Computer1.
What should you do?
A. From Computer1, run gpupdate/force.
B. From Group Policy Management, add an application control policy to GP1.
C. From Group Policy Management, enable the Enforced option on GP1.
D. In the local Group Policy of Computer1, configure a software restriction policy.
Answer: B
Explanation:
AppLocker policies take precedence over policies generated by SRP on computers that are
running an operating system that supports AppLocker.
AppLocker policies in the GPO are applied, and they supersede the policies generated by
SRP in the GPO and local AppLocker policies or policies generated by SRP.
Q132. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Server1 and Server2 are member servers.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Remote Server Administration Tools on Server1.
B. Install Windows Management Framework 3.0 on Server2.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: B,D
Explanation:
To be able to fully manage remote servers that run Windows Server 2008 or the R2 Service Pack 1 operating system, you should install the .NET Framework 4 on Server2 first followed by the Windows Management Framework 3.0.
Q133. - (Topic 3)
You have a file server named Server1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can use Windows Server Backup to create a complete backup of Server1.
What should you configure?
A. The local groups by using Computer Management
B. The Role Assignment by using Authorization Manager
C. A task by using Authorization Manager
D. The User Rights Assignment by using the Local Group Policy Editor
Answer: A
Q134. - (Topic 3)
You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table.
You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?
A. a storage pool on Disk 2 and Disk 3
B. a spanned volume on Disk 2 and Disk 3
C. a mirrored volume on Disk 1 and Disk 3
D. a mirrored volume on Disk 2 and Disk 3
E. a RAID-5 volume on Disk 1, Disk 2, and Disk 3
F. a storage pool on Disk 1 and Disk 3
G. a spanned volume on Disk 0 and Disk 4
H. a mirrored volume on Disk 1 and Disk 4
Answer: D
Q135. - (Topic 3)
Which of the following group scope modifications are never permitted? (Choose all answers that are correct.)
A. Global to universal
B. Global to domain local
C. Universal to global
D. Domain local to universal
Answer: B
Explanation:
A. Incorrect: Global to universal group conversions are sometimes permitted.
B. Correct: Global to domain local group conversions are never permitted.
C. Incorrect: Universal to global group conversions are sometimes permitted.
D. Incorrect: Domain local to universal group conversions are sometimes permitted.
Q136. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1that runs Windows Server 2012 R2.
You create a DHCP scope named Scope1. The scope has a start address of 192168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0. What should you do first?
A. From Windows PowerShell, run the Remove-DhcpServerv4PolicyIPRange cmdlet.
B. From the DHCP console, modify the Scope Options of Scope1.
C. From Windows PowerShell, run the Remove-DhcpServerv4Scope cmdlet.
D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
Answer: C
Explanation:
. Set-DhcpServerv4Scope Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.
. Syntax: Parameter Set: WithoutRange Set-DhcpServerv4Scope [-ScopeId] <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>] Parameter Set: WithRange Set-DhcpServerv4Scope [-ScopeId] <IPAddress> -EndRange <IPAddress> -StartRange <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Q137. HOTSPOT - (Topic 3)
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed.
On Server1, you have a virtual machine named VM1.
You plan to deploy an image to VM1 by using Windows Deployment Services (WDS).
You need to ensure that VM1 can connect to Server1 by using PXE.
Which settings should you configure on VM1? To answer, select the appropriate settings in
the answer area.
Answer:
Q138. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
You have configured a server, named ENSUREPASS-SR07, as a VPN server. You are required to configure new firewall rules for workstation connections.
You want to achieve this using the least amount of administrative effort.
Which of the following actions should you take?
A. You should consider making use of the Enable-NetFirewallRule cmdlet.
B. You should consider making use of the New-NetFirewallRule cmdlet.
C. You should consider making use of dism.exe from the command prompt.
D. You should consider making use of dsadd.exe from the command prompt.
Answer: B
Explanation:
New-NetFirewallRule – Creates a new inbound or outbound firewall rule and adds the rule to the target computer. You can’t Enable what doesn’t exist yet… you must use New-NetFirewallRule
Q139. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
You are running a training exercise for junior administrators. You are currently discussing spanned volumes.
Which of the following is TRUE with regards to spanned volumes? (Choose all that apply.)
A. Spanned volumes do not provide fault tolerance.
B. Spanned volumes are a fault tolerant solution.
C. You can extend a spanned volume onto a maximum of 16 dynamic disks.
D. You cannot create a spanned volume using a system volume or boot volume.
Answer: A,D
Explanation:
A spanned volume is a dynamic volume consisting of disk space on more than one physical disk. If a simple volume is not a system volume or boot volume, you can extend it across additional disks (up to 32 total) to create a spanned volume, or you can create a spanned volume in unallocated space on a dynamic disk. You need at least two dynamic disks in addition to the startup disk to create a spanned volume. You can extend a spanned volume onto a maximum of 32 dynamic disks. Spanned volumes are not fault tolerant.
Q140. - (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non-administrators.
Which tool should you use?
A. Group Policy Object Editor
B. Group Policy Management
C. Group Policy Management Editor
D. Server Manager
Answer: A
Explanation:
Once you create a GPO, you can open it in the Group Policy Management Editor and
configure the GPO’s policies, specifically those settings that target the non-administrators.
In this scenario however, you still need to configure the Group Policy thus you would need
the GPO Editor.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10:
Implementing Group Policy, Lesson 1: Planning, implementing and managing group policy,
p. 475