70-410 Exam
Quick Guide: examcollection 70 410
Pass4sure offers free demo for braindumps 70 410 exam. "Installing and Configuring Windows Server 2012", also known as exam collections 70 410 exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 410 exam questions pdf exam, will help you answer those questions. The 70 410 installing and configuring windows server 2012 r2 Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft 70 410 questions exams and revised by experts!
Q111. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains an Application server named Server1. Server1 runs Windows Server 2012 R2.
Server1 is configured as an FTP server.
Client computers use an FTP Application named App1.exe. App1.exe uses TCP port 21 as
the control port and dynamically requests a data port.
On Server1, you create a firewall rule to allow connections on TCP port 21. You need to configure Server1 to support the client connections from App1.exe. What should you do?
A. Run netshadvfirewall set global statefulftp enable.
B. Create an inbound firewall rule to allow App1.exe.
C. Create a tunnel connection security rule.
D. Run Set-NetFirewallRule -DisplayName DynamicFTP -Profile Domain
Answer: A
Explanation:
The netsh firewall context is supplied only for backward compatibility. We recommend that you do not use this context on a computer that is running Windows Vista or a later version of Windows. In the netsh advfirewall firewall context, the add command only has one variation, the add rule command. Netsh advfirewall set global statefulftp: Configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port. When statefulftp is enabled, the firewall examines the PORT and PASV requests for these other port numbers and then allows the corresponding data connection to the port number that was requested. Syntax set global statefulftp { enable | disable | notconfigured } Parameters statefulftp can be set to one of the following values: enable The firewall tracks the port numbers specified in PORT command requests and in the responses to PASV requests, and then allows the incoming FTP data traffic entering on the requested port number. disable This is the default value. The firewall does not track outgoing PORT commands or PASV responses, and so incoming data connections on the PORT or PASV requested port is blocked as an unsolicited incoming connection. notconfigured Valid only when netsh is configuring a GPO by using the set store command.
Q112. DRAG DROP - (Topic 2)
You are configuring a test network. The test network contains a subnet named LAN1. LAN1 uses the network ID of 10.10.1.0/27.
You plan to add a new subnet named LAN2 to the test network.
LAN1 and LAN2 will be connected by a router.
You need to identify a valid network ID for LAN2 that meets the following requirements: Ensures that hosts on LAN2 can communicate with hosts on LAN1. Supports at least 100 IPv4 hosts. Uses only private IP addresses. Which network ID should you use?
To answer, drag the appropriate network ID and subnet mask to the correct location in the answer area.
Answer:
Q113. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains an organizational unit (OU) named OU1.
You need to ensure that when new client computers join the domain, their computer accounts are created in OU1 by default.
What should you do?
A. From Windows PowerShell, run the Move-ADObjectcmdlet.
B. From a command prompt, run the redircmp.exe command.
C. From ADSI Edit, configure the properties of the OU1 object.
D. From Ldp, configure the properties of the Computers container.
Answer: B
Explanation:
Redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in CN=Computers. The CN=Computers container is a computer-protected object. For backward compatibility reasons, you cannot (and must not) remove it.
: http://technet.microsoft.com/en-us/library/cc770619.aspx
Q114. HOTSPOT - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Print1 that runs Windows Server 2012 R2.
Print1 has 50 shared printers. Each printer is listed in Active Directory.
From Active Directory Users and Computers, you browse to Print1 and you discover that the 50 printers are not visible.
You need to ensure that you can view the printer objects in Active Directory Users and Computers.
Which option should you select? To answer, select the appropriate option in the answer area.
Answer:
Q115. HOTSPOT - (Topic 2)
Your company has a main office and a sales office. The main office has 2,000 users. The sales office has 20 users. All client computers in the sales office run Windows 8.
The sales office contains a print server named App1 that runs Windows Server 2012 R2. App1 has a shared printer named Printer1. Printer1 connects to a network-attached print device.
You plan to connect all of the users in the sales office to Printer1 on App1.
You need to ensure that if App1 fails, the users can continue to print to Printer1.
What should you configure on App1? To answer, select the appropriate option in the answer area.
Answer:
Q116. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation:
The Automatic Stop Action setting should be modified because it will allow you to configure: “Save the virtual machine state” option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down. OR “Turn Off the virtual machine” is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine. OR “Shut down the guest operating system” is successful only if the “Hyper-V Shutdown” guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
Q117. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
A server named, ENSUREPASS-SR13, has a Server Core Installation of Windows Server 2012 installed.
You are instructed to convert ENSUREPASS-SR13’s installation to a Server with GUI installation.
You want to use a Windows PowerShell cmdlet that uses Windows Update as a source.
Which of the following actions should you take?
A. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart cmdlet.
B. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart -Source c:\mountdir\windows\winsxs cmdlet.
C. You should consider making use of the Uninstall-WindowsFeature Server-Gui-Shell–Remove cmdlet.
D. You should consider making use of the Set-ExecutionPolicy cmdlet.
Answer: B
Explanation:
The default installation source is Windows Update (provided that the server is connected to
the internet).
The Full GUI Server Interface provides you with the full GUI of Windows Server 2012 R2.
PowerShell Command: Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell.
When it’s done, we will need to restart our server by using the Shutdown command:
shutdown -r -t 0
Q118. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. You have a DHCP server named Server1 that runs Windows Server 2008.
You install Windows Server 2012 R2 on a server named Server2. You install the DHCP Server server role on Server2.
You need to migrate the DHCP services from Server1 to Server2. The solution must meet the following requirements:
. Ensure that existing leases are migrated.
. Prevent lease conflicts.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Server1, run the Export-DhcpServer cmdlet.
B. On Server1, run the Stop-Service cmdlet.
C. On Server2, run the Receive-SmigServerData cmdlet.
D. On Server2, run the Stop-Service cmdlet.
E. On Server2, run the Import-DhcpServer cmdlet.
F. On Server1, run the Send-SmigServerData cmdlet.
Answer: A,B,E
Q119. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. New-StorageSubsytemVirtualDisk
B. File Server Resource Manager (FSRM)
C. Server Manager
D. Computer Management
Answer: A
Explanation:
For other questions to create a VHD (file) you can use computer management.
-Share and storage management (2008 only)
-New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
-Server Manager (you would use this to create virtual disks, not virtual hard disks)
Q120. - (Topic 3)
Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server2 that runs Windows Server 2012 R2. Server2 is connected to LAN1. You run the route print command as shown in the exhibit.
You need to ensure that Server2 can communicate with the client computers on LAN2.
What should you do?
A. Change the metric of the 10.10.1.0 route.
B. Set the state of the Teredo interface to disable.
C. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
D. Run route delete 172.23.2.0.
Answer: D
Explanation:
You should delete the route 172.23.2.0 to allow communication between the client computers and Server2. The route is used to identify PIv6 /IPv4 packets that are being sent.