70-410 Exam
Foolproof microsoft 70 410 exam tips
Want to know Actualtests mcp 70 410 Exam practice test features? Want to lear more about Microsoft Installing and Configuring Windows Server 2012 certification experience? Study Approved Microsoft mcsa 70 410 pdf answers to Most up-to-date 70 410 exam dumps questions at Actualtests. Gat a success with an absolute guarantee to pass Microsoft 70 410 study guide pdf (Installing and Configuring Windows Server 2012) test on your first attempt.
Q31. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing the new VHD format called VHDX.
Which of the following is TRUE with regards to VHDX? (Choose all that apply.)
A. It supports virtual hard disk storage capacity of up to 64 GB.
B. It supports virtual hard disk storage capacity of up to 64 TB.
C. It does not provide protection against data corruption during power failures.
D. It has the ability to store custom metadata about the file that the user might want to record.
Answer: B,D
Explanation:
The main new features of the VHDX format are: Support for virtual hard disk storage capacity of up to 64 TB. Protection against data corruption during power failures by logging updates to the VHDX metadata structures. Improved alignment of the virtual hard disk format to work well on large sector disks. The VHDX format also provides the following features: Larger block sizes for dynamic and differencing disks, which allows these disks to attune to the needs of the workload. A 4-KB logical sector virtual disk that allows for increased performance when used by applications and workloads that are designed for 4-KB sectors. The ability to store custom metadata about the file that the user might want to record, such as operating system version or patches applied. Efficiency in representing data (also known as “trim”), which results in smaller file size and allows the underlying physical storage device to reclaim unused space. (Trim requires physical disks directly attached to a virtual machine or SCSI disks, and trim-compatible hardware). VHDX Format – Features and Benefits VHDX format features provide features at the virtual hard disk as well as virtual hard disk file layers and is optimized to work well with modern storage hardware configurations and capabilities. At the virtual hard disk layer, benefits include the ability to represent a large virtual disk size up to 64 TB, support larger logical sector sizes for a virtual disk up to 4 KB that facilitates the conversion of 4 KB sector physical disks to virtual disks, and support large block sizes for a virtual disk up to 256 MB that enables tuning block size to match the IO patterns of the application or system for optimal performance. At the virtual hard disk file layer, the benefits include the use of a log to ensure resiliency of the VHDX file to corruptions from system power failure events and a mechanism that allows for small pieces of user generated data to be transported along with the VHDX file. On modern storage platforms, the benefits include optimal performance on host disks that have physical sector sizes larger than 512 bytes through improved data alignment and capability to use the information from the UNMAP command, sent by the application or system using the virtual hard disk, to optimize the size of the VHDX file. The format is designed so that additional features could be introduced in the future by Microsoft or extended by other parser implementations. The format provides parsers the ability to detect features in a VHDX file that a parser does not understand.
Q32. HOTSPOT - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Server1 that runs Windows Server 2012 R2.
You share several printers on Server1.
You need to ensure that you can view the printer objects associated to Server1 in Active
Directory Users and Computers.
Which option should you select?
To answer, select the appropriate option in the answer area.
Answer:
Q33. HOTSPOT - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
Several users are members of the local Administrators group.
You need to ensure that all local administrators receive User Account Control (UAC)
prompts when they run a Microsoft Management Console (MMC).
Which settings should you modify from the Local Security Policy? To answer, select the
appropriate settings in the answer area.
Answer:
Q34. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed.
You need to manage DHCP on Server2 by using the DHCP console on Server1.
What should you do first?
A. From Windows Firewall with Advanced Security on Server2, create an inbound rule.
B. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.
C. From Server Manager on Server1, install a feature.
D. From Windows PowerShell on Server2, run Enable PSRemoting.
Answer: C
Explanation:
The Enable-PSRemoting cmdlet configures the computer to receive Windows PowerShell remote commands that are sent by using the WS-Management technology. On Windows Server 2012 R2, Windows PowerShell remoting is enabled by default. You can use Enable-PSRemoting to enable Windows PowerShell remoting on other supported versions of Windows and to re-enable remoting on Windows Server 2012 if it becomes disabled. You need to run this command only once on each computer that will receive commands. You do not need to run it on computers that only send commands. Because the configuration activates listeners, it is prudent to run it only where it is needed. Note: (not B) You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems.
Q35. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have
Windows Server 2012 installed.
You are running a training exercise for junior administrators. You are currently discussing NIC Teaming.
Which of the following is TRUE with regards to NIC Teaming? (Choose all that apply.)
A. It allows for traffic failover to prevent connectivity loss if a network component fails.
B. It prevents bandwidth aggregation.
C. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 5 NICs in a team.
D. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 32 NICs in a team.
Answer: A,D
Explanation:
NIC teaming, also known as Load Balancing/Failover (LBFO), allows multiple network adapters to be placed into a team for the purposes of bandwidth aggregation, and/or traffic failover to maintain connectivity in the event of a network component failure. This feature has long been available from NIC vendors but until now NIC teaming has not been included with Windows Server. Do I have to select a standby member to get fault tolerance (failover)? No. IN any team with two or more network adapters if a network adapter fails in an Active/Active configuration, the traffic on that network adapter will gracefully failover to the other network adapters in the team even if none of the other adapters are in standby mode. Number of NICs in a team in a native host NIC teaming requires the presence of at least one Ethernet NIC. A team of one NIC may be used for separation of traffic using VLANs. Obviously a team with only one team member has no failure protection. Fault protection (failover) requires a minimum of two Ethernet NICs in the team. The Windows Server 2012 implementation supports up to 32 NICs in a team. Number of team interfaces for a team Windows Server 2012 supports up to 32 team interfaces.
Q36. - (Topic 3)
Your network contains an active directory domain named contoso.com. The domain contains a domain controller named DCS. DCS has a server core installation of windows server 2012. You need to uninstall Active Directory from DCS manually. Which tool should you use?
A. The Remove-WindowsFeature cmdlet
B. the ntdsutil.exe command
C. the dsamain.exe command
D. the Remove-ADComputer cmdlet
Answer: B
Q37. - (Topic 3)
You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table.
You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?
A. A mirrored volume on Disk 1 and Disk 4
B. A storage pool on Disk 2 and Disk 3
C. A storage pool on Disk 1 and Disk 3
D. A mirrored volume on Disk 2 and Disk 3
Answer: D
Q38. HOTSPOT - (Topic 2)
Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1.
When you run ping dc1.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that DC1 can respond to the Ping command.
Which rule should you modify?
To answer, select the appropriate rule in the answer area.
Answer:
Q39. - (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed.
You connect a new print device to the network. The marketing department and the sales department will use the print device.
You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users.
What should you do on Server1?
A. Add two printers. Modify the priorities of each printer and the security settings of each printer
B. Add two printers and configure printer pooling
C. Add one printer and configure printer pooling.
D. Add one printer. Modify the printer priority and the security settings
Answer: A
Explanation:
To set different print priority to different groups Open Printers and Faxes. Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics. Click the Advanced tab. In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.
Q40. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All servers run Windows Server 2012 R2. The domain contains two domain controllers named DC1 and DC2. Both domain controllers are virtual machines on a Hyper-V host.
You plan to create a cloned domain controller named DC3 from an image of DC1.
You need to ensure that you can clone DC1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the computer account of DC1 to the Cloneable Domain Controllers group.
B. Create a DCCloneConfig.xml file on DC1.
C. Add the computer account of DC3 to the Cloneable Domain Controllers group.
D. Run the Enable-AdOptionalFeaturecmdlet.
E. Modify the contents of the DefaultDCCIoneAllowList.xml file on DC1.
Answer: A,B
Explanation:
A. Cloneable Domain Controllers Group There’s a new group in town. It’s called Cloneable Domain Controllers and you can find it in the Users container. Membership in this group dictates whether a DC can or cannot be cloned. This group has some permissions set on the domain head that should not be removed. Removing these permissions will cause cloning to fail. Also, as a best practice, DCs shouldn’t be added to the group until you plan to clone and DCs should be removed from the group once cloning is complete. Cloned DCs will also end up in the Cloneable Domain Controllers group.
B. DCCloneConfig.xml There’s one key difference between a cloned DC and a DC that is being restored to a previous snapshot: DCCloneConfig.XML. DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways. The New-ADDCCloneConfigcmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor.
Reference: Virtual Domain Controller Cloning in Windows Server 2012.