70-410 Exam
A Complete Guide to 70 410 dumps
Act now and download your Microsoft exam collections 70 410 test today! Do not waste time for the worthless Microsoft microsoft 70 410 exam tutorials. Download Far out Microsoft Installing and Configuring Windows Server 2012 exam with real questions and answers and begin to learn Microsoft 70 410 questions with a classic professional.
P.S. Approved 70-410 item pool are available on Google Drive, GET MORE: https://drive.google.com/open?id=1gKqa_vO9OeNyYEjdDpkvCkiJIJhS7seE
New Microsoft 70-410 Exam Dumps Collection (Question 9 - Question 18)
Question No: 9
You have a server named Server1 that runs Windows Server 2012 R2.
On Server1, you open Computer Management as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can create a 3-TB volume on Disk 1. What should you do first?
A. Create a storage pool.
B. Convert the disk to a GPT disk.
C. Create a VHD, and then attach the VHD.
D. Convert the disk to a dynamic disk.
Answer: B
Question No: 10
You have a server that runs Windows Server 2012 R2.
You need to create a volume that will remain online if two disks in the volume fail. The solution must minimize the number of disks used to create the volume. Which three actions should you perform in sequence?
A. Add five physical disks
B. Create a storage space and set the disk allocation of one of the disks to "Hot Spare"
C. Create a virtual disk
D. Create a storage space by using the default disk allocation
E. Add three physical disks
Answer: A,C,D
Explanation:
A storage space with three-way mirroring can tolerate two disk failures but requires a minimum of five disks.
References:
http://technet.microsoft.com/en-us/library/hh831739.aspx http://technet.microsoft.com/en-us/library/jj822938.aspx http://technet.microsoft.com/en-us/library/jj899886.aspx http://technet.microsoft.com/en-us/library/5de72fb5-e1e3-43a7-a176-d17cdf4d312e
Question No: 11
Your network contains an Active Directory domain named contoso.com. The domain contains 100 servers. The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must
ensure that Group1 is added only to the servers. What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation:
:A. This would add the group to the wrong OU
:B. This would affect the whole domain and would effect member of the group
:C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
:D. Restricted Groups defines what member or groups should exist as part of a group Why use Group Policy preferences?
Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy, Group Policy preferences only App1y to Active Directory policy. You use preferences to configure many areas of the OS, including:
System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer
VPN and dial-up networking connections Printer configuration and mapping
Registry settings, schedule tasks and system services
Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management
Start Menu properties and menu items
Question No: 12
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2. Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?
A. Hyper-V Administrators on Server1
B. Administrators on VM1
C. Server Operators on Server1
D. Power Users on VM1
Answer: B
Explanation:
The user has to be an administrator on VM1 to be able to install features.
In Windows Server 2012 R2, the Server Manager console and Windows PowerShell- cmdlets for
Server Manager allow installation of roles and features to local or remote servers, or offline virtual hard disks (VHDs).
You can install multiple roles and features on a single remote server or offline VHD in a single Add Roles and Features Wizard or Windows PowerShell session. You must be logged on to a server as an administrator to install or uninstall roles, role services, and features. If you are logged on to the local computer with an account that does not have administrator rights on your target server, right-click the target server in the Servers tile, and then click Manage As to provide an account that has administrator rights. The server on which you want to mount an offline VHD must be added to Server Manager, and you must have Administrator rights on that server.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, p.539
Question No: 13
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2. You join Server2 to the contoso.com domain.
You need to ensure that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2?
A. Install Windows Management Framework.
B. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
C. Install Remote Server Administration Tools (RSAT).
D. Run sconfig.exe and configure remote management.
Answer: D
Explanation:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations. You must be a member of the Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server with a GUI mode.
References:
http://technet.microsoft.com/en-us/library/jj647766.aspx
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80
Question No: 14
You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5. What should you do?
A. Create a storage pool.
B. Convert the disk to a dynamic disk.
C. Create a VHD, and then attach the VHD.
D. Convert the disk to a GPT disk.
Answer: : D
Explanation:
MBR max is 2TB, the disk must be GPT
For any hard drive over 2TB, we need to use GPT partition. If you have a disk larger than 2TB size, the rest of the disk space will not be used unless you convert it to GPT. An existing MBR partition canu2021t be converted to GPT unless it is completely empty; you must either delete everything and convert or create the partition as GPT. It is not possible to boot to a GPT partition, impossible to convert MBR to GPT without data loss.
Question No: 15
Your network contains an Active Directory domain named contoso.com.
You log on to a domain controller by using an account named Admin1.Admin1 is a member of the Domain Admins group.
You view the properties of a group named Group1 as shown in the exhibit. (Click the Exhibit button.)
Group1 is located in an organizational unit (OU) named OU1.
You need to ensure that users from Group1 can modify the Security settings of OU1 only.
What should you do from Active Directory Users and Computers?
A. Modify the Managed By settings on OU1.
B. Right-click contoso.com and select Delegate Control.
C. Right-click OU1 and select Delegate Control.
D. Modify the Security settings of Group1.
Answer: C
Explanation:
Delegating control to only the OU will allow the users of Group1 to modify the security settings.
Question No: 16
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has following storage spaces:
u2711 Data
u2711 Users
u2711 Backups
u2711 Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk. Which storage space contains the new disk?
A. Primordial
B. Data
C. Users
D. Backups
Answer: A
Explanation:
All storage that meets acceptable criteria for Storage Spaces will be placed in the Primordial Pool. This can be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual disks or pools at this point. The Primordial Pool will only consist of physical storage devices that do not belong to any other pools.
Question No: 17
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8.1.
You need to ensure that when users are connected to the network, they always use local offline files that are cached from Server1.
Which Group Policy setting should you configure?
A. Configure slow-link mode.
B. Configure Slow link speed
C. Enable file synchronization on costed networks
D. Turn on economical application of administratively assigned Offline Files.
Answer: A
Explanation:
:A. Offline Files to provide faster access to cached files and redirected folders.
:B. Defines a slow connection for purposes of Applying and updating Group Policy.
:C. automatically tracks roaming and bandwidth usage limits while on metered connections
:D. Lists network files and folders that are always available for offline use. This policy makes the specified files and folders available offline to users of the computer. When Offline Files is operating in the slow-link mode, all network file requests are satisfied from the OfflineFiles cache. This is similar to a user working offline. If you enable this policy setting, Offline Files uses the slow-link mode if the network throughput between the client and the server is below (slower than) the Throughput threshold parameter, or if the round-trip network latency is above (slower than) the Latency threshold parameter.
Question No: 18
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots.
You need to modify the snapshot file location of VM1. What should you do?
A. Delete the existing snapshots, and then modify the settings of VM1.
B. Right-click VM1, and then click Move.
C. Right-click VM1, and then click Export.
D. PauseVM1, and then modify the settings of VM1.
Answer: A
Explanation:
You will need to navigate to the Hyper-V Management snap-in (C:ProgramDataMicrosoftWindowsHyper-V) and from there access the Snapshot file Location tab where you can change the settings for the VM1 snapshot file location. However, since there are already several snapshots in existence, you will need to delete them first because you will not be able to change the location of the snapshot file while there is an existing snapshot.
You need to modify the snapshot file location of VM1.
100% Far out Microsoft 70-410 Questions & Answers shared by Dumpscollection, Get HERE: http://www.dumpscollection.net/dumps/70-410/ (New 496 Q&As)