70-410 Exam
braindump 70-410 [Jul 2021]
It is impossible to pass Microsoft 70-410 exam without any help in the short term. Come to Ucertify soon and find the most advanced, correct and guaranteed Microsoft 70-410 practice questions. You will get a surprising result by our Renovate Installing and Configuring Windows Server 2012 practice guides.
2021 Jul braindump 70-410:
Q111. HOTSPOT - (Topic 2)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 hosts 50 virtual machines.
You need to create a script to list all of the virtual machines that have checkpoints and support Secure Boot.
What should you do? To answer, select the appropriate options in the answer area.
Answer:
Q112. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
A server named, ENSUREPASS-SR13, has a Server Core Installation of Windows Server 2012 installed.
You are instructed to convert ENSUREPASS-SR13’s installation to a Server with GUI installation.
You want to use a Windows PowerShell cmdlet that uses Windows Update as a source.
Which of the following actions should you take?
A. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart cmdlet.
B. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart -Source c:\mountdir\windows\winsxs cmdlet.
C. You should consider making use of the Uninstall-WindowsFeature Server-Gui-Shell–Remove cmdlet.
D. You should consider making use of the Set-ExecutionPolicy cmdlet.
Answer: B
Explanation:
The default installation source is Windows Update (provided that the server is connected to
the internet).
The Full GUI Server Interface provides you with the full GUI of Windows Server 2012 R2.
PowerShell Command: Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell.
When it’s done, we will need to restart our server by using the Shutdown command:
shutdown -r -t 0
Q113. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
Contoso.com has a domain controller, named ENSUREPASS-DC01.
You have been instructed to make sure that the Group Policy Administrative Templates are available centrally.
Which of the following actions should you take?
A. You should consider copying the policies folder to the PolicyDefinitions folder in the Contoso.com domain’s SYSVOL folder.
B. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s SYSVOL folder.
C. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s systemroot folder.
D. You should consider copying the PolicyDefinitions folder to the policies folder in the Contoso.com domain’s logonserver folder.
Answer: B
Explanation:
PolicyDefinitions folder within the SYSVOL folder hierarchy. By placing the ADMX files in this directory, they are replicated to every DC in the domain; by extension, the ADMX-aware Group Policy Management Console in Windows Vista, Windows 7, Windows Server 2008 and R2 can check this folder as an additional source of ADMX files, and will report them accordingly when setting your policies. By default, the folder is not created. Whether you are a single DC or several thousand, I would strongly recommend you create a Central Store and start using it for all your ADMX file storage. It really does work well. The Central Store To take advantage of the benefits of .admx files, you must create a Central Store in the SYSVOL folder on a domain controller. The Central Store is a file location that is checked by the Group Policy tools. The Group Policy tools use any .admx files that are in the Central Store. The files that are in the Central Store are later replicated to all domain controllers in the domain. To create a Central Store for .admx and .adml files, create a folder that is named PolicyDefinitions in the following location: \\FQDN\SYSVOL\FQDN\policies. Note: FQDN is a fully qualified domain name.
Q114. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM “Server2 | Set-VMNetworkAdapter -IovWeight 1
B. Get-VM “Server1 | Set-VMNetworkAdapter -Allow/Teaming On
C. Get-VM “Server1 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “Server2 | Set-VMNetworkAdapter -PortMirroring Destination
E. Get-VM “Server1 | Set-VMNetworkAdapter -IovWeight 0
F. Get-VM “Server2 | Set-VMNetworkAdapter-AllowTeaming On
Answer: C,D
Q115. - (Topic 3)
You have a server named Server2 that runs Windows Server 2012 R2. Server2 has the Hyper-V server role installed.
The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server2 named VM1.
You need to ensure that you can configure a pass-through disk for VM1.
What should you do?
A. Convert Disk 1 to a basic disk.
B. Take Disk 1 offline.
C. Create a partition on Disk 1.
D. Convert Disk 1 to a MBR disk.
Answer: B
Explanation:
Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective
Most up-to-date mcsa 70-410 practice test:
Q116. HOTSPOT - (Topic 2)
You have two servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
You need to ensure that Server2 can be managed by using Server Manager from Server1.
In the table below, identify which actions must be performed on Server1 and Server2.Make only one selection in each row. Each correct selection is worth one point.
Answer:
Q117. HOTSPOT - (Topic 2)
You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter.
From Windows PowerShell, you run the following command:
Remove-WindowsFeature ServerGui-Shell.
In the table below, identify which tools are available on Server1 and which tools are
unavailable on Server1.
Make only one selection in each row. Each correct selection is worth one point.
Answer:
Q118. - (Topic 3)
You are attempting to delete a global security group in the Active Directory Users and Computers console, and the console will not let you complete the task.
Which of the following could possibly be causes for the failure? (Choose all answers that are correct.)
A. There are still members in the group.
B. One of the group’s members has the group set as its primary group.
C. You do not have the proper permissions for the container in which the group is located.
D. You cannot delete global groups from the Active Directory Users and Computers console.
Answer: B,C
Explanation:
A. Incorrect: It is possible to delete a group that has members.
B. Correct: If any member sets the group as its primary group, then the system does not permit the group to be deleted.
C. Correct: You must have the appropriate Active Directory permissions for the container in which the group is located to delete it.
D. Incorrect: It is possible to delete groups using the Active Directory Users and Groups console.
Q119. DRAG DROP - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named DC1 that has the DNS Server server role installed. DC1 hosts an Active Directory-integrated zone for the domain. The domain contains a member server named Server1.
You install the DNS Server server role on Server1.
You need to ensure that Server1 can respond authoritatively to queries for the existing contoso.com namespace.
Which cmdlets should you run on each server? (To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Answer:
Q120. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1. Server1 runs Windows Server 2012 R2.
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share
–
Advanced option.
You need to ensure that you can use SMB Share – Advanced to create the new share.
What should you do on Server1 before you run the New Share Wizard?
A. Run the Set-SmbShare cmdlet.
B. Install the File Server Resource Manager role service.
C. Configure Dynamic Access Control and Apply a central access policy.
D. Configure the Advanced system settings.
Answer: B