70-410 Exam
The Only Tip You Need: 70-410 installing and configuring windows server 2012 pdf download
There are various Microsoft 70-410 training materials on the industry. But Testking has all the Microsoft 70-410 exam practice components you need. Our 70-410 dumps cover almost everything that appears in the real exam. Our Microsoft Microsoft 70-410 training training course is a quick way with a rapidly pace that assist a person in obtaining certified. The Microsoft 70-410 exam questions along with accurate along with trustworthy answers are compiled and revised by our skilled IT authorities.
2021 Oct windows server 2012 mcsa:
Q211. HOTSPOT - (Topic 2)
Your network contains an Active Directory forest. The forest contains two domains named Domain1 and Domain2.
Domain1 contains a file server named Server1. Server1 has a shared folder named Share1.
Domain2 contains 50 users who require access to Share1.
You need to create groups in each domain to meet the following requirements:
. In Domain1, create a group named Group1. Group1 must be granted access to Share1. . In Domain2, create a group named Group2. Group2 must contain the user accounts of the 50 users. . Permission to Share1 must only be assigned directly to Group1.
Which type of groups should you create and which group nesting strategy should you use?
To answer, select the appropriate configuration in the answer area.
Answer:
Q212. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 R2 installed.
When you recently added new workstations to the Contoso.com manually, you found that that the computer accounts were created in the default container.
You want to make sure that the default container for newly created computers is redirected to a specified, target organizational unit (OU).
Which of the following actions should you take?
A. You should consider making use of the replace.exe command-line tool.
B. You should consider making use of the redircmp.exe command-line tool.
C. You should consider making use of the redirusr.exe command-line tool.
D. You should consider making use of the rexec.exe command-line tool.
Answer: B
Explanation:
redircmp.exe redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in CN=Computers.
Q213. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have
Windows Server 2012 installed.
You are running a training exercise for junior administrators. You are currently discussing NIC Teaming.
Which of the following is TRUE with regards to NIC Teaming? (Choose all that apply.)
A. It allows for traffic failover to prevent connectivity loss if a network component fails.
B. It prevents bandwidth aggregation.
C. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 5 NICs in a team.
D. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 32 NICs in a team.
Answer: A,D
Explanation:
NIC teaming, also known as Load Balancing/Failover (LBFO), allows multiple network adapters to be placed into a team for the purposes of bandwidth aggregation, and/or traffic failover to maintain connectivity in the event of a network component failure. This feature has long been available from NIC vendors but until now NIC teaming has not been included with Windows Server. Do I have to select a standby member to get fault tolerance (failover)? No. IN any team with two or more network adapters if a network adapter fails in an Active/Active configuration, the traffic on that network adapter will gracefully failover to the other network adapters in the team even if none of the other adapters are in standby mode. Number of NICs in a team in a native host NIC teaming requires the presence of at least one Ethernet NIC. A team of one NIC may be used for separation of traffic using VLANs. Obviously a team with only one team member has no failure protection. Fault protection (failover) requires a minimum of two Ethernet NICs in the team. The Windows Server 2012 implementation supports up to 32 NICs in a team. Number of team interfaces for a team Windows Server 2012 supports up to 32 team interfaces.
Q214. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains 20 computer accounts that reside in an organizational unit (OU) named OU1.
A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to assign several user rights to a user named User1.
In the Users container, you create a new user named User2.
You need to ensure that User2 is assigned the same user rights as User1 on all of the client computers in OU1.
What should you do?
A. Modify the settings in GPO1.
B. Modify the link of GPO1.
C. Link a WMI filter to GPO1.
D. Move User2 to OU1.
Answer: D
Explanation:
The GPO is linked to OU1. By moving User2 to OU1 the GPO will be applied to this user.
Q215. - (Topic 3)
Your network contains one Active Directory domain named contoso.com. The domain contains
2,000 client computers used by students. You recently discover an increase in calls to the helpdesk that relate to security policy to meet the following requirement:
. Modify the UserName of the built-in account named Administrator . Support a time mismatch between client computers and domain controllers of up to three minutes.
Which Two security settings should you modify?
A. Account Policies
B. Password Policy
C. Account Lockout Policy
D. Kerberos Policy
E. Local Policies
F. Audit Policy
G. User Rights Assignment
H. Security Options
Answer: D,H
Explanation:
In Group Policy Object Editor, click Computer Configuration, click Windows Settings, click Security Settings, click Local Policies, and then click Security Options. In the details pane, double-click Accounts: Rename administrator account.
Regenerate windows server 2012 study guide:
Q216. - (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed.
You connect a new print device to the network. The marketing department and the sales department will use the print device.
You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users.
What should you do on Server1?
A. Add two printers. Modify the priorities of each printer and the security settings of each printer
B. Add two printers and configure printer pooling
C. Add one printer and configure printer pooling.
D. Add one printer. Modify the printer priority and the security settings
Answer: A
Explanation:
To set different print priority to different groups Open Printers and Faxes. Right-click the printer you want to set, click Properties, and then click the Advanced tab. In Priority, click the up or down arrows, and then click OK. Or, type a priority level, where 1 is the lowest level and 99 is the highest, and then click OK. Click Add Printer to add a second logical printer for the same physical printer. For instructions, see Related Topics. Click the Advanced tab. In Priority, set a priority higher than that of the first logical printer. Instruct the regular group of users to use the first logical printer name and the group with higher priority to use the second logical printer name. Set the appropriate permissions for the different groups.
Q217. - (Topic 3)
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You take a snapshot of VM1, and then you install an application on VM1.
You verify that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file. The solution must minimize the amount of downtime on VM1.
What should you do?
A. From Hyper-V Manager, delete the snapshot.
B. From a command prompt, run dism.exe and specify the /commit-image parameter.
C. From a command prompt, run dism.exe and specify the /delete-image parameter.
D. From Hyper-V Manager, inspect the virtual hard disk.
Answer: A
Explanation:
Virtual machine snapshots are file-based snapshots of the state, disk data, and configuration of a virtualmachine at a specific point in time. You can take multiple snapshots of a virtual machine, even while it is running. You can then revert the virtual machine to any of the previous states by App1ying a snapshot to the virtualmachine. Taking a snapshot of a VM is to in essence freeze the current state and make it a parent disk based on currentstate, and at the same time create a child disk to capture all subsequent changes. – See more at: Snapshots require adequate storage space. Snapshots are stored as .avhd files in the same location at thevirtual hard disk. Taking multiple snapshots can quickly consume a large amount of storage space. When you use Hyper-V Manager to delete a snapshot, the snapshot is removed from the snapshot treebut the .avhd file is not deleted until you turn off the virtual machine.
Q218. - (Topic 1)
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as shown in following table.
When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?
A. The placement of the global catalog server
B. The placement of the infrastructure master
C. The placement of the domain naming master
D. The placement of the PDC emulator
Answer: D
Explanation:
The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close interaction between the RID operations master role and the PDC emulator role. The PDC emulator processes password changes from earlier-version clients and other domain controllers on a best-effort basis; handles password authentication requests involving passwords that have recently changed and not yet been replicated throughout the domain; and, by default, synchronizes time. If this domain controller cannot connect to the PDC emulator, this domain controller cannot process authentication requests, it may not be able to synchronize time, and password updates cannot be replicated to it. The PDC emulator master processes password changes from client computers and replicates these updates to all domain controllers throughout the domain. At any time, there can be only one domain controller acting as the PDC emulator master in each domain in the forest.
Q219. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator, RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in Contoso.com’s perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
Q220. - (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012
R2.Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References:
http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335