70-411 Exam
Finding Abreast of the times 70-411 prep
The item official certifications qualifications have become well known on the list of individuals plus the performing training who wants to move ahead in their job. fact simply being one of the greatest and the majority of influential software program titans, its 70-411 official certifications is highly sought after through individuals worldwide and it also guarantees that you simply work inside of a superior firm. That is the marketplace circumstances currently, youve got a Microsoft 70-411 youve got a work.
2021 Mar 70-411 test engine
Q131. Your network contains a server named Server1 that has the Network Policy and Access Services server role installed.
All of the network access servers forward connection requests to Server1.
You create a new network policy on Server1.
You need to ensure that the new policy applies only to connection requests from the 192.168.0.0/24 subnet.
What should you do?
A. Set the Client IP4 Address condition to 192.168.0.0/24.
B. Set the Client IP4 Address condition to 192.168.0.
C. Set the Called Station ID constraint to 192.168.0.0/24.
D. Set the Called Station ID constraint to 192.168.0.
Answer: B
Explanation:
RADIUS client properties
Following are the RADIUS client conditions that you can configure in network policy.
. Calling Station ID: Specifies the network access server telephone number that was dialed by the dial-up access client.
. Client Friendly Name: Specifies the name of the RADIUS client that forwarded the connection request to the NPS server.
. Client IPv4 Address: Specifies the Internet Protocol (IP) version 4 address of the RADIUS client that forwarded the connection request to the NPS server.
. Client IPv6 Address: Specifies the Internet Protocol (IP) version 6 address of the RADIUS client that forwarded the connection request to the NPS server.
. Client Vendor: Specifies the name of the vendor or manufacturer of the RADIUS client that sends connection requests to the NPS server.
. MS RAS Vendor: Specifies the vendor identification number of the network access server that is requesting authentication.
Q132. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. Both servers have the File and Storage Services server role, the DFS Namespaces role service, and the DFS Replication role service installed.
Server1 and Server2 are part of a Distributed File System (DFS) Replication group named Group1. Server1 and Server2 are separated by a low-speed WAN connection.
You need to limit the amount of bandwidth that DFS can use to replicate between Server1 and Server2.
What should you modify?
A. The referral ordering of the namespace
B. The staging quota of the replicated folder
C. The cache duration of the namespace
D. The schedule of the replication group
Answer: D
Explanation:
Scheduling allows less bandwidth the by limiting the time interval of the replication
Does DFS Replication throttle bandwidth per schedule, per server, or per connection?
If you configure bandwidth throttling when specifying the schedule, all connections for that replication group will use that setting for bandwidth throttling. Bandwidth throttling can be also set as a connection-level setting using DFS Management.
To edit the schedule and bandwidth for a specific connection, use the following steps:
In the console tree under the Replication node, select the appropriate replication group.
Click the Connections tab, right-click the connection that you want to edit, and then click Properties.
Click the Schedule tab, select Custom connection schedule and then click Edit Schedule.
Use the Edit Schedule dialog box to control when replication occurs, as well as the maximum amount of bandwidth replication can consume.
Q133. You have a failover cluster that contains five nodes. All of the nodes run Windows Server 2012 R2. All of the nodes have BitLocker Drive Encryption (BitLocker) enabled.
You enable BitLocker on a Cluster Shared Volume (CSV).
You need to ensure that all of the cluster nodes can access the CSV.
Which cmdlet should you run next?
A. Unblock-Tpm
B. Add-BitLockerKeyProtector
C. Remove-BitLockerKeyProtector
D. Enable BitLockerAutoUnlock
Answer: B
Explanation:
4. Add an Active Directory Security Identifier (SID) to the CSV disk using the Cluster Name Object (CNO) The Active Directory protector is a domain security identifier (SID) based protector for protecting clustered volumes held within the Active Directory infrastructure. It can be bound to a user account, machine account or group. When an unlock request is made for a protected volume, the BitLocker service interrupts the request and uses the BitLocker protect/unprotect APIs to unlock or deny the request. For the cluster service to selfmanage BitLocker enabled disk volumes, an administrator must add the Cluster Name Object (CNO), which is the Active Directory identity associated with the Cluster Network name, as a BitLocker protector to the target disk volumes. Add-BitLockerKeyProtector <drive letter or CSV mount point> -ADAccountOrGroupProtector – ADAccountOrGroup $cno
Q134. Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU1. You
configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user.
You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again. What should you do?
A. Enforce GPO1.
B. Modify the Link1 shortcut preference of GPO1.
C. Enable loopback processing in GPO1.
D. Modify the Security Filtering settings of GPO1.
Answer: B
Explanation:
Replace Delete and recreate a shortcut for computers or users. The net result of the Replace action is to overwrite the existing shortcut. If the shortcut does not exist, then the Replace action creates a new shortcut.
This type of preference item provides a choice of four actions: Create, Replace, Update, and Delete. The behavior of the preference item varies with the action selected and whether the shortcut already exists.
Refernces: http: //technet.microsoft.com/en-us/library/cc753580.aspx http: //technet.microsoft.com/en-us/library/cc753580.aspx
Q135. You have a server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 to create an entry in an event log when the processor usage exceeds 60 percent.
Which type of data collector should you create?
A. An event trace data collector
B. A performance counter alert
C. A performance counter data collector
D. A configuration data collector
Answer: B
Explanation:
Performance alerts notify you when a specified performance counter exceeds your configured threshold by logging an event to the event log. But rather than notifying you immediately when the counter exceeds the threshold, you can configure a time period over which the counter needs to exceed the threshold, to avoid unnecessary alerts.
Far out 70-411 pdf exam:
Q136. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
A domain controller named DO has the ADMX Migrator tool installed. You have a custom Administrative Template file on DC1 named Template1.adm.
You need to add a custom registry entry to Template1.adm by using the ADMX Migrator tool.
Which action should you run first?
A. Load Template
B. New Policy Setting
C. Generate ADMX from ADM
D. New Category
Answer: C
Explanation:
The ADMX Migrator provides two conversion methods — through the editor or through a command-line program. From the ADMX Editor, choose the option to Generate ADMX from ADM. Browse to your ADM file, and the tool quickly and automatically converts it. You then can open the converted file in the editor to examine its values and properties and modify it if you wish. The ADMX Migrator Command Window is a little more complicated; it requires you to type a lengthy command string at a prompt to perform the conversions. However, it includes some options and flexibility not available in the graphical editor.
References: http: //technet. microsoft. com/pt-pt/magazine/2008. 02. utilityspotlight%28en-us%29. aspx http: //technet. microsoft. com/pt-pt/magazine/2008. 02. utilityspotlight%28en-us%29. aspx
Q137. You have a file server that has the File Server Resource Manager role service installed.
You open the File Server Resource Manager console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all of the folders in Folder1 have a 100-MB quota limit.
What should you do?
A. Run the Update FsrmQuotacmdlet.
B. Run the Update-FsrmAutoQuotacmdlet.
C. Create a new quota for Folder1.
D. Modify the quota properties of Folder1.
Answer: C
Explanation:
By using auto apply quotas, you can assign a quota template to a parent volume or folder. Then File Server Resource Manager automatically generates quotas that are based on that template. Quotas are generated for each of the existing subfolders and for subfolders that you create in the future.
Ref: http://technet.microsoft.com/en-us/library/cc731577.aspx
Q138. Your network contains an Active Directory domain named contoso.com. The domain contains five servers. The servers are configured as shown in the following table.
All desktop computers in contoso.com run Windows 8 and are configured to use BitLocker Drive Encryption (BitLocker) on all local disk drives.
You need to deploy the Network Unlock feature. The solution must minimize the number of features and server roles installed on the network.
To which server should you deploy the feature?
A. Server1
B. Server2
C. Server3
D. Server4
E. Server5
Answer: E
Explanation:
The BitLocker Network Unlock feature will install the WDS role if it is not already installed. If you want to install it separately before you install BitLocker Network Unlock you can use Server Manager or Windows PowerShell. To install the role using Server Manager, select the Windows Deployment Services role in Server Manager.
Q139. Your network contains an Active Directory domain named contoso.com. The domain contains six domain controllers. The domain controllers are configured as shown in the following table.
The network contains a server named Server1 that has the Hyper-V server role installed. DC6 is a virtual machine that is hosted on Server1.
You need to ensure that you can clone DC6.
What should you do?
A. Transfer the schema master to DC6.
B. Transfer the PDC emulator to DC5.
C. Transfer the schema master to DC4.
D. Transfer the PDC emulator to DC2.
Answer: D
Explanation:
A deployed Windows Server 2012 domain controller (virtualized or physical) that hosts the PDC emulator role (DC1). To verify whether the PDC emulator role is hosted on a Windows Server 2012 domain controller, run the following Windows PowerShell command: Get-ADComputer (Get-ADDomainController –Discover –Service "PrimaryDC").name –Propertyoperatingsystemversion|fl
Reference: http: //technet. microsoft. com/en-us/library/hh831734. aspx#steps_deploy_vdc
Q140. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Remote Access server role installed.
DirectAccess is implemented on Server1 by using the default configuration.
You discover that DirectAccess clients do not use DirectAccess when accessing websites on the Internet.
You need to ensure that DirectAccess clients access all Internet websites by using their DirectAccess connection.
What should you do?
A. Configure a DNS suffix search list on the DirectAccess clients.
B. Configure DirectAccess to enable force tunneling.
C. Disable the DirectAccess Passive Mode policy setting in the DirectAccess Client Settings Group Policy object (GPO).
D. Enable the Route all traffic through the internal network policy setting in the DirectAccess Server Settings Group Policy object (GPO).
Answer: B
Explanation:
With IPv6 and the Name Resolution Policy Table (NRPT), by default, DirectAccess clients separate their intranet and Internet traffic as follows:
. DNS name queries for intranet fully qualified domain names (FQDNs) and all intranet traffic is exchanged over the tunnels that are created with the DirectAccess server or directly with intranet servers. Intranet traffic from DirectAccess clients is IPv6 traffic.
. DNS name queries for FQDNs that correspond to exemption rules or do not match the intranet namespace, and all traffic to Internet servers, is exchanged over the physical interface that is connected to the Internet. Internet traffic from DirectAccess clients is typically IPv4 traffic.
In contrast, by default, some remote access virtual private network (VPN) implementations, including the VPN client, send all intranet and Internet traffic over the remote access VPN connection. Internet-bound traffic is routed by the VPN server to intranet IPv4 web proxy servers for access to IPv4 Internet resources. It is possible to separate the intranet and Internet traffic for remote access VPN clients by using split tunneling. This involves configuring the Internet Protocol (IP) routing table on VPN clients so that traffic to intranet locations is sent over the VPN connection, and traffic to all other locations is sent by using the physical interface that is connected to the Internet.
You can configure DirectAccess clients to send all of their traffic through the tunnels to the DirectAccess server with force tunneling. When force tunneling is configured, DirectAccess clients detect that they are on the Internet, and they remove their IPv4 default route. With the exception of local subnet traffic, all traffic sent by the DirectAccess client is IPv6 traffic that goes through tunnels to the DirectAccess server.