70-411 Exam
Secrets to microsoft free 411
Our 70-411 training materials with regard to Microsoft certification are obtainable in diverse formats, like Pdf, downloadable engine, to help you get by means of your exam. You can make entire preparation for the Microsoft 70-411 certification examination. Whether youd just like to research from a great ebook or on the computer, you can review the Microsoft Microsoft certification test using your own rate. You have much freedom to select appropriate Microsoft questions and answers to prepare the very best for your 70-411 exam.
2021 Sep windows server 2012 exam 70 411:
Q71. Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012 R2.
You have a Password Settings object (PSOs) named PSO1.
You need to view the settings of PSO1.
Which tool should you use?
A. Get-ADDefaultDomainPasswordPolicy
B. Active Directory Administrative Center
C. Local Security Policy
D. Get-ADAccountResultantPasswordReplicationPolicy
Answer: B
Explanation:
In Windows Server 2012, fine-grained password policy management is made much easier than Windows Server 2008/2008 R2. Windows Administrators not have to use ADSI Edit and configure complicated settings to create the Password Settings Object (PSO) in the Password Settings Container. Instead we can configure fine-grained password policy directly in Active Directory Administrative Center (ADAC).
Q72. Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012 R2. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCIoningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Answer: A,E
Explanation:
Because domain controllers provide a distributed environment, you could not safely clone an Active Directory domain controller in the past.
Before, if you cloned any server, the server would end up with the same domain or forest, which is unsupported with the same domain or forest. You would then have to run sysprep, which would remove the unique security information before cloning and then promote a domain controller manually. When you clone a domain controller, you perform safe cloning, which a cloned domain controller automatically runs a subset of the sysprep process and promotes the server to a domain controller automatically.
The four primary steps to deploy a cloned virtualized domain controller are as follows:
. Grant the source virtualized domain controller the permission to be cloned by
adding the source virtualized domain controller to the Cloneable Domain
Controllers group.
. Run Get-ADDCCloningExcludedApplicationListcmdlet in Windows PowerShell to determine which services and applications on the domain controller are not compatible with the cloning.
. Run New-ADDCCloneConfigFile to create the clone configuration file, which is stored in the C:\Windows\NTDS.
. In Hyper-V, export and then import the virtual machine of the source domain controller.
Run Get-ADDCCloningExcludedApplicationListcmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationListcmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationListcmdlet before the New-ADDCCloneConfigFilecmdlet because if the New-ADDCCloneConfigFilecmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning.
Get-ADDCCloningExcludedApplicationList
Get-ADDCCloningExcludedApplicationList -GenerateXml
The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
. The Get-ADDCCloningExcludedApplicationListcmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
. The Get-ADDCCloningExcludedApplicationListcmdlet needs to be run before the New- ADDCCloneConfigFilecmdlet is used because if the New-ADDCCloneConfigFilecmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
. DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfigcmdlet in PowerShell
By hand with an XML editor
By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
You can populate the XML file. . . . . doesn't need to be empty. . . . .
References: http: //technet. microsoft. com/en-us/library/hh831734. aspx
http: //blogs. dirteam. com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directory-domain-services-in-windows-server-2012-part-13-domain-controller-cloning. aspx
Q73. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed.
You need to enable trace logging for Network Policy Server (NPS) on Server1.
Which tool should you use?
A. The tracert.exe command
B. The Network Policy Server console
C. The Server Manager console
D. The netsh.exe command
Answer: D
Explanation:
NPS trace logging files
You can use log files on servers running Network Policy Server (NPS) and NAP client computers to help troubleshoot NAP problems. Log files can provide the detailed information required for troubleshooting complex problems.
You can capture detailed information in log files on servers running NPS by enabling remote access tracing. The Remote Access service does not need to be installed or running to use remote access tracing. When you enable tracing on a server running NPS, several log files are created in %windir%\tracing.
The following log files contain helpful information about NAP:
IASNAP. LOG: Contains detailed information about NAP processes, NPS authentication, and NPS authorization.
IASSAM. LOG: Contains detailed information about user authentication and authorization.
Membership in the local Administrators group, or equivalent, is the minimum required to enable tracing. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups (http: //go. microsoft. com/fwlink/?LinkId=83477).
To create tracing log files on a server running NPS
Open a command line as an administrator.
Type netshras set tr * en.
Reproduce the scenario that you are troubleshooting.
Type netshras set tr * dis.
Close the command prompt window.
Reference: http: //technet. microsoft. com/en-us/library/dd348461%28v=ws. 10%29. aspx
Q74. DRAG DROP
You have a WIM file that contains an image of Windows Server 2012 R2.
Recently, a technician applied a Microsoft Standalone Update Package (MSU) to the image.
You need to remove the MSU package from the image.
Which three actions should you perform in sequence? To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q75. HOTSPOT
You have a server named Server5 that runs Windows Server 2012 R2. Servers has the Windows Deployment Services server role installed.
You need to ensure that when client computers connect to Server5 by using PXE, the computers use an unattended file.
What should you configure?
To answer, select the appropriate tab in the answer area.
Answer:
Most up-to-date ms press 70-411:
Q76. Your network contains an Active Directory domain named contoso.com.
All user accounts for the marketing department reside in an organizational unit (OU) named OU1. All user accounts for the finance department reside in an organizational unit (OU) named OU2.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU2. You configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop.
You discover that when a user signs in, the Link1 is not added to the desktop.
You need to ensure that when a user signs in, Link1 is added to the desktop.
What should you do?
A. Enforce GPO1.
B. Enable loopback processing in GPO1.
C. Modify the Link1 shortcut preference of GPO1.
D. Modify the Security Filtering settings of GPO1.
Answer: D
Explanation:
Security filtering is a way of refining which users and computers will receive and apply the settings in a Group Policy object (GPO). Using security filtering, you can specify that only certain security principals within a container where the GPO is linked apply the GPO. Security group filtering determines whether the GPO as a whole applies to groups, users, or computers; it cannot be used selectively on different settings within a GPO.
Q77. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains 30 user accounts that are used for network administration. The user accounts are members of a domain global group named Group1.
You identify the security requirements for the 30 user accounts as shown in the following table.
You need to identify which settings must be implemented by using a Password Settings object (PSO) and which settings must be implemented by modifying the properties of the user accounts.
What should you identify? To answer, configure the appropriate settings in the dialog box in the answer area.
Answer:
Q78. HOTSPOT
You have a file server named Server1 that runs Windows Server 2012 R2.
A user named User1 is assigned the modify NTFS permission to a folder named C:\shares and all of the subfolders of C:\shares.
On Server1, you open File Server Resource Manager as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
Answer:
Q79. HOTSPOT
You have a server named Server1 that has the Web Server (IIS) server role installed. You obtain a Web Server certificate.
You need to configure a website on Server1 to use Secure Sockets Layer (SSL).
To which store should you import the certificate? To answer, select the appropriate store in the answer area.
Answer:
Q80. HOTSPOT
You have a server named LON-SVR1 that runs Windows Server 2012 R2. LON-SVR1 has the Remote Access server role installed. LON-SVRl is located in the perimeter network.
The IPv4 routing table on LON-SVR1 is configured as shown in the following exhibit. (Click the Exhibit button.)
Your company purchases an additional router named Router1. Router1 has an interface that connects to the perimeter network and an interface that connects to the Internet. The IP address of the interface that connects to the perimeter network is 172.16.0.2.
You need to ensure that LON-SVR1 will route traffic to the Internet by using Router1 if the current default gateway is unavailable.
How should you configure the static route on LON-SVR1? To answer, select the appropriate static route in the answer area.
Answer: