70-412 Exam
What Up to date 70-412 Is?
It is more faster and easier to pass the Microsoft 70-412 exam by using Virtual Microsoft Configuring Advanced Windows Server 2012 Services questuins and answers. Immediate access to the Regenerate 70-412 Exam and find the same core area 70-412 questions with professionally verified answers, then PASS your exam with a high score now.
2021 Mar 70-412 practice test
Q111. HOTSPOT
Your company has a main office and a branch office. An Active Directory site exists for each office.
The network contains an Active Directory forest named contoso.com. The contoso.com domain contains three member servers named Server1, Server2, and Server3. All servers run Windows Server 2012 R2.
In the main office, you configure Server1 as a file server that uses BranchCache.
In the branch office, you configure Server2 and Server3 as BranchCache hosted cache servers.
You are creating a Group Policy for the branch office site.
Which two Group Policy settings should you configure?
To answer, select the appropriate two settings in the answer area.
Answer:
Q112. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.
You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. the Scale-Out File Server
Answer: C
Explanation:
The quorum configuration in a failover cluster determines the number of failures that the cluster can sustain.
Reference: Understanding Quorum Configurations in a Failover Cluster
http://technet.microsoft.com/en-us/library/cc731739.aspx
Q113. You have a server named Server1 that runs Windows Server 2012 R2. The storage on Server1 is configured as shown in the following table.
You plan to implement Data Deduplication on Server1.
You need to identify on which drives you can enable Data Deduplication.
Which three drives should you identify? (Each correct answer presents part of the solution. Choose three.)
A. C
B. D
C. E
D. F
E. G
Answer: B,D,E
Explanation:
Volumes that are candidates for deduplication must conform to the following requirements:
* Must not be a system or boot volume. (not A)
* Can be partitioned as a master boot record (MBR) or a GUID Partition Table (GPT), and must be formatted using the NTFS file system. (not C)
* Can reside on shared storage, such as storage that uses a Fibre Channel or an SAS array, or when an iSCSI SAN and Windows Failover Clustering is fully supported.
* Do not rely on Cluster Shared Volumes (CSVs). You can access data if a deduplication-enabled volume is converted to a CSV, but you cannot continue to process files for deduplication.
* Do not rely on the Microsoft Resilient File System (ReFS).
* Must be exposed to the operating system as non-removable drives. Remotely-mapped drives are not supported.
Ref: Plan to Deploy Data Deduplication http://technet.microsoft.com/en-us/library/hh831700.aspx
Q114. You have 30 servers that run Windows Server 2012 R2.
All of the servers are backed up daily by using Windows Azure Online Backup.
You need to perform an immediate backup of all the servers to Windows Azure Online
Backup.
Which Windows PowerShell cmdlets should you run on each server?
A. Get-OBPolicy | StartOBBackup
B. Start-OBRegistration | StartOBBackup
C. Get-WBPolicy | Start-WBBackup
D. Get-WBBackupTarget | Start-WBBackup
Answer: A
Explanation:
This example starts a backup job using a policy.
Windows PowerShell
PS C:\> Get-OBPolicy | Start-OBBackup
Incorrect:
Not B. Registers the current computer to Windows Azure Backup.
Not C. Not using Azure
Not D. Not using Azure
Reference: Start-OBBackup
http://technet.microsoft.com/en-us/library/hh770406(v=wps.620).aspx
Q115. You have a server named Server1 that runs Windows Server 2012 R2.
Server1 fails.
You identify that the master boot record (MBR) is corrupt.
You need to repair the MBR.
Which tool should you use?
A. Bcdedit
B. Bcdboot
C. Bootrec
D. Fixmbr
Answer: C
Explanation:
Repairing an unbootable Windows installation with bootrec.exe If the boot/recovery partition is corrupted or lost, you can modify your Windows OS partition to boot.
. Boot from your Windows Vista/7/Server2008/R2/2012 media and choose the
"Repair Windows" option. . Open the command prompt. . Using diskpart, mark your Windows partition as bootable. . If your windows partition does not have it, copy the "boot" folder from the
installation media.
. Run the following commands: >c: >cd boot >attrib bcd -s -h -r >ren c:\boot\bcd bcd.old >bootrec /RebuildBcd Reboot and Windows should boot normally. If not, return to the command prompt and run: >bootrec /FixMBR >bootrec /FixBoot
Incorrect: Not A. BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose as Bootcfg.exe on earlier versions of Windows Not B. The BCDboot tool is a command-line tool that enables you to manage system partition files Not D. Fixmbr is not a tool. Fixmbr is an option when using the bootrec tool.
Reference: Windows BCD Store
http://www.itsgotme.com/wiki/Windows_BCD
Renew 70-412 exam price:
Q116. You have a server named Server1 that runs Windows Server 2012 R2.
You modify the properties of a system driver and you restart Server1.
You discover that Server1 continuously restarts without starting Windows Server 2012 R2.
You need to start Windows Server 2012 R2 on Server1 in the least amount of time. The
solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Repair Your Computer
B. Last Known Good Configuration (advanced)
C. Disable Driver Signature Enforcement
D. Disable automatic restart on system failure
Answer: B
Explanation:
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Reference: Using Last Known Good Configuration
Q117. HOTSPOT
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
The network has the physical sites and TCP/IP subnets configured as shown in the following table.
You have a web application named App1 that is hosted on six separate Web servers. DNS has the host names and IP addresses registered as shown in the following table.
You discover that when users connect to appl.contoso.com, they are connected frequently to a server that is not on their local subnet.
You need to ensure that when the users connect to appl.contoso.com, they connect to a server on their local subnet. The connections must be distributed across the servers that host appl.contoso.com on their subnet.
Which two settings should you configure?
To answer, select the appropriate two settings in the answer area.
Answer:
Q118. Your network contains an Active Directory forest named adatum.com. All servers run Windows Server 2012 R2. The domain contains four servers. The servers are configured as shown in the following table.
You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.
On which server should you install IPAM?
A. Server1
B. Server2
C. Server3
D. Server4
Answer: D
Explanation:
An IPAM server is intended as a single-purpose server. It is not recommended to collocate
other network infrastructure roles such as DNS or DHCP on the same server. IPAM installation is not supported on a domain controller, and discovery of DHCP servers will be disabled if you install IPAM on a server that is also running the DHCP Server service. The following features and tools are automatically installed when you install IPAM Server.
Reference: IPAM Deployment Planning
Q119. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically.
What should you do on Server1?
A. Configure the Discovery settings of the iSCSI initiator.
B. Configure the security settings of the iSCSI target.
C. Run the Set-WmiInstance cmdlet.
D. Run the Set-IscsiServerTarget cmdlet.
Answer: C
Explanation:
Explanation/Reference:
Manage iSNS server registration
The iSNS server registration can be done using the following cmdlets, which manages the
WMI objects.
To add an iSNS server:
Set-WmiInstance -Namespace root\wmi -Class WT_iSNSServer –Arguments
@{ServerName="ISNSservername"}
Note: The Set-WmiInstance cmdlet creates or updates an instance of an existing WMI
class. The created or updated instance is written to the WMI repository.
Reference: iSCSI Target cmdlet reference
http://blogs.technet.com/b/filecab/archive/2012/06/08/iscsi-target-cmdlet-reference.aspx
Q120. Your network contains an Active Directory forest named contoso.com. The contoso.com domain only contains domain controllers that run Windows Server 2012 R2.
The forest contains a child domain named child.contoso.com. The child.contoso.com domain only contains domain controllers that run Windows Server 2008 R2. The child.contoso.com domain contains a member server named Server1 that runs Windows Server 2012 R2.
You have access to four administrative user accounts in the forest. The administrative user accounts are configured as shown in the following table.
You need to ensure that you can add a domain controller that runs Windows Server 2012 R2 to the child.contoso.com domain.
Which account should you use to run adprep.exe?
A. Admin1
B. Admin2
C. Admin3
D. Admin4
Answer: C
Explanation:
Adprep.exe performs operations that must be completed on the domain controllers that run
in an existing Active Directory environment before you can add a domain controller that
runs that version of Windows Server.
Preparing to run adprep /domainprep (see step 2 below).
To help ensure that the adprep /domainprep command runs successfully, complete these
steps before you run the command on the infrastructure operations master role holder in
each domain:
. Make sure that the schema updates that adprep /forestprep performs replicated throughout the forest or that they at least replicated to the infrastructure master for the domain where you plan to run adprep /domainprep.
. Make sure that you can log on to the infrastructure master with an account that is a member of the Domain Admins group. . Verify that the domain functional level is appropriate.
Reference: Running Adprep.exe
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx