70-412 Exam
The Secret of exam 70 412
Your success in Microsoft mcsa 70 412 is our sole target and we develop all our 70 412 vce braindumps in a way that facilitates the attainment of this target. Not only is our 70 412 vce study material the best you can find, it is also the most detailed and the most updated. 70 412 vce Practice Exams for Microsoft Windows Server exam 70 412 are written to the highest standards of technical accuracy.
Q101. You have a server named Server1 that runs Windows Server 2012 R2 and is used for testing.
A developer at your company creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1 will no longer start.
You need to ensure that the developer can test the new driver. The solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Disable Driver Signature Enforcement
B. Disable automatic restart on system failure
C. Last Know Good Configuration (advanced)
D. Repair Your Computer
Answer: A
Explanation:
A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel-mode driver only if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate early driver development and non-automated testing.
Incorrect:
Not B. specifies that Windows automatically restarts your computer when a failure occurs.
Not C. Developer would not be able to test the driver as needed.
Not D. Removes or repairs critical windows files, Developer would not be able to test the
driver as needed and some file loss.
Reference: Installing Windows Server 2012.
http://technet.microsoft.com/en-us/library/jj134246.aspx
http://msdn.microsoft.com/en-us/library/windows/hardware/ff547565(v=vs.85).aspx
Q102. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.
Cluster1 hosts an Application named App1.
You need to ensure that Server2 handles all of the client requests to the cluster for App1. The solution must ensure that if Server2 fails, Server1 becomes the active node for App1.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. the Scale-Out File Server
Answer: J
Explanation:
The preferred owner in a two-server cluster will always be the active node unless it is down.
Reference: Preferred Owners in a Cluster
http://blogs.msdn.com/b/clustering/archive/2008/10/14/9000092.aspx
Q103. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
You attempt to delete a classification property and you receive the error message as shown in the exhibit. (Click the Exhibit button.)
You need to delete the isConfidential classification property.
What should you do?
A. Delete the classification rule that is assigned the isConfidential classification property.
B. Disable the classification rule that is assigned the isConfidential classification property.
C. Set files that have an isConfidential classification property value of Yes to No.
D. Clear the isConfidential classification property value of all files.
Answer: A
Explanation:
You would have to delete the classification rule in order to delete the classification property.
Q104. Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.
The domain controllers are configured as shown in the following table.
You configure a user named User1 as a delegated administrator of DC10.
You need to ensure that User1 can log on to DC10 if the network link between the Main site and the Branch site fails.
What should you do?
A. Add User1 to the Domain Admins group.
B. On DC10, modify the User Rights Assignment in Local Policies.
C. Run repadmin and specify the /prp parameter.
D. On DC10, run ntdsutil and configure the settings in the Roles context.
Answer: C
Explanation:
repadmin /prp will allow the password caching of the local administrator to the RODC.
This command lists and modifies the Password Replication Policy (PRP) for read-only domain controllers (RODCs). Reference: RODC Administration https://technet.microsoft.com/en-us/library/cc755310%28v=ws.10%29.aspx
Q105. Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2. All servers have the Hyper-V server role and the Failover Clustering feature installed.
You need to replicate virtual machines from Cluster1 to Cluster2.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. From Hyper-V Manager on a node in Cluster2, create three virtual machines.
B. From Cluster2, add and configure the Hyper-V Replica Broker role.
C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
D. From Cluster1, add and configure the Hyper-V Replica Broker role.
E. From Hyper-V Manager on a node in Cluster2 modify the Hyper-V settings.
Answer: C,D,E
Explanation:
D. You must configure the Hyper-V Replica Broker for cluster1.
E. We must configure configure the Replica server to receive replication from primary servers: In Hyper-V Manager, click Hyper-V Settings in the Actions pane.
In the Hyper-V Settings dialog, click Replication Configuration.
In the Details pane, select Enable this computer as a Replica server.
C. Enable virtual machine replication.
Once the hosting server is configured for Replica, you can enable replication for each
virtual machine that you want to be replicated.
Reference: Deploy Hyper-V Replica
https://technet.microsoft.com/en-us/library/jj134207.aspx
Q106. Your company has a main office and a remote office. The remote office is used for disaster recovery.
The network contains an Active Directory domain named contoso.com. The domain contains member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server 2012 R2.
Server1 and Server2 are located in the main office. Server3 and Server4 are located in the remote office.
All servers have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Storage is replicated between the main office and the remote site.
You need to ensure that Cluster1 is available if two nodes in the same office fail.
What are two possible quorum configurations that achieve the goal? (Each correct answer presents a complete solution. Choose two.)
A. No Majority: Disk Only
B. Node Majority
C. Node and File Share Majority
D. Node and Disk Majority
Answer: A,B
Explanation:
Depending on the quorum configuration option that you choose and your specific settings, the cluster will be configured in one of the following quorum modes:
* (A) No majority (disk witness only)
* (B) Node majority (no witness)
* Node majority with witness (disk or file share)
Reference: Configure and Manage the Quorum in a Windows Server 2012 R2 Failover Cluster
Q107. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
You are creating a file management task as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that the Include all folders that store the following kinds of data list displays an entry named Corporate Data.
What should you do?
A. Create a new file group.
B. Create a new classification property.
C. Modify the properties of the System Files file group.
D. Modify the Folder Usage classification property.
Answer: B
Explanation:
Classification properties are used to assign values to files. Reference: Working with File Classification
Q108. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains domain controllers that run either Windows Server 2003, Windows Server 2008 R2, or Windows Server 2012 R2.
You plan to implement a new Active Directory forest. The new forest will be used for testing and will be isolated from the production network.
In the test network, you deploy a server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 as a new domain controller in a new forest named contoso.test.
The solution must meet the following requirements:
. The functional level of the forest and of the domain must be the same as that of contoso.com. . Server1 must provide name resolution services for contoso.test.
What should you do?
To answer, configure the appropriate options in the answer area.
Answer:
Q109. Your network contains an Active Directory domain named contoso.com.
A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS) on a server named Server1.
After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.
You attempt to deploy AD RMS.
During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found.
You need to ensure that clients will only attempt to establish connections to the new AD RMS deployment.
Which should you do?
A. From DNS, remove the records for Server1.
B. From DNS, increase the priority of the DNS records for the new deployment of AD RMS.
C. From Active Directory, remove the computer object for Server1.
D. From Active Directory, remove the SCP.
Answer: D
Explanation: The Active Directory Rights Management Services (AD RMS) Service Connection Point (SCP) is an object in Active Directory that holds the web address of the AD RMS certification cluster. AD RMS-enabled applications use the SCP to discover the AD RMS service; it is the first connection point for users to discover the AD RMS web services.
Only one SCP can exist in your Active Directory forest. If you try to install AD RMS and an SCP already exists in your forest from a previous AD RMS installation that was not properly deprovisioned, the new SCP will not install properly. It must be removed before you can establish the new SCP.
Reference: The AD RMS Service Connection Point
http://social.technet.microsoft.com/wiki/contents/articles/710.the-ad-rms-service-connection-point.aspx
Q110. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs a Server Core installation of Windows Server 2012 R2.
You need to deploy a certification authority (CA) to Server1. The CA must support the auto-enrollment of certificates.
Which two cmdlets should you run? (Each correct answer presents part of the solution.
Choose two.)
A. Add-CAAuthoritylnformationAccess
B. Install-AdcsCertificationAuthority
C. Add-WindowsFeature
D. Install-AdcsOnlineResponder
E. Install-AdcsWebEnrollment
Answer: B,E
Explanation:
Explanation
B. The Install-AdcsCertificationAuthority cmdlet performs installation and configuration of
the AD CS CA role service. It can be used to install a root CA.
Example:
Install-AdcsCertificationAuthority –CAType StandaloneRootCA –CACommonName
"ContosoRootCA" –KeyLength 2048 –HashAlgorithm SHA1 –CryptoProviderName
"RSA#Microsoft Software Key Storage Provider"
E: The Install-AdcsWebEnrollment cmdlet performs initial installation and configuration of
the Certification Authority Web Enrollment role service.
Note: Prior to the availability of Certificate Enrollment Web Services, AD CS required that client computers configured for certificate auto-enrollment be connected directly to the corporate network. Certificate Enrollment Web Services allows organizations to enable AD CS using a perimeter network. This allows users and computers outside the corporate network to enroll for certificates.
Certificate Enrollment web service
Reference: Deploying AD CS Using Windows PowerShell