70-417 Exam
Today Big Q: 70 417 exam?
Cause all that matters here is passing the Microsoft 70 417 exam exam. Cause all that you need is a high score of microsoft 70 417 Upgrading Your Skills to MCSA Windows Server 2012 exam. The only one thing you need to do is downloading Actualtests 70 417 vce exam study guides now. We will not let you down with our money-back guarantee.
Q201. OTSPOT
You have a server named LON-SRV1 that runs Windows Server 2012 R2. LON-SVR1 has the Remote server role installed. LON-SVR1 is located in the perimeter network.
The IPv4 routing table on LON-SVR1 is configured as shown in the following exhibit. (Click the Exhibit Button)
Your company purchases an additional router named router named Router1. Router1 has an interface that connects to perimeter network and an interface that connects to the Internet. The IP address of interface that connects to the perimeter network is 172.16.0.2.
You need to ensure that LON-SRV1 will route traffic to the internet by using Router1 if the current detail gateway is unavailable.
How should you configure the static route on LON-SRV1?
To answer, select the appropriate static route in the answer area.
Answer:
Q202. Your company has a main office and a branch office.
The network contains an Active Directory domain named contoso.com.
The main office contains a domain controller named DC1 that runs Windows Server 2012 R2.
DC1 is a DNS server and hosts a primary zone for contoso.com. The branch office contains a member server named Server1 that runs Windows Server 2012 R2. Server1 is a DNS server and hosts a secondary zone for contoso.com.
The main office connects to the branch office by using an unreliable WAN link.
You need to ensure that Server1 can resolve names in contoso.com if the WAN link in unavailable for three days.
Which setting should you modify in the start of authority (SOA) record?
A. Retry interval
B. Refresh interval
C. Expires after
D. Minimum (default) TTL
Answer: C
Explanation: Used by other DNS servers that are configured to load and host the zone to determine when zone data expires if it is not renewed
Q203. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC5. DC5 has a Server Core Installation of Windows Server 2012 R2.
You need to uninstall Active Directory from DC5 manually.
Which tool should you use?
A. The Remove-ADComputercmdlet
B. The ntdsutil.exe command
C. The dsamain.exe command
D. The Remove-WindowsFeaturecmdlet
Answer: D
Explanation: http://technet.microsoft.com/en-us/library/hh472163.aspx#BKMK_RemoveSM http://technet.microsoft.com/en-us/library/cc732257.aspx#BKMK_powershell
Q204. OTSPOT
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Access server role installed.
You need to configure the ports on Server1 to ensure that client computers can establish VPN connections to Server1 by using TCP port 443.
What should you modify? To answer, select the appropriate object in the answer area.
Answer:
418. You have a server named Server1 that runs Windows Server 2012 R2. You modify the
properties of a system driver and you restart Server1.
You discover that Server1 continuously restarts without starting Windows Server 2012 R2.
You need to start Windows Server 2012 R2 on Server1 in the least amount of time.
The solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Repair Your Computer
B. Disable Driver Signature Enforcement
C. Last Know Good Configuration (advanced)
D. Disable automatic restart on system failure
Answer: C
Explanation:
Last known good configuration is used when a modification made to the registry base prevent the computer to restart normally (like after installing an Application for example, or a driver...).
Q205. Your network contains a server named Server1 that runs Windows Server 2012. Server1
has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: J
Explanation:
http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror What's New in Hyper-V Virtual Switch Port Mirroring With Port Mirroring, traffic sent to or from a Hyper-V Virtual Switch port is copied and sent to a mirror port. There are a range of applications for port mirroring an entire ecosystem of network visibility companies exist that have products designed to consume port mirror data for performance management, security analysis, and network diagnostics. With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic. The following examples configure port mirroring so that all traffic that is sent and received by both MyVM and MyVM2 is also sent to the VM named MonitorVM. Set-VMNetworkAdapter VMName MyVM PortMirroring Source Set-VMNetworkAdapter VMName MyVM2 PortMirroring Source Set-VMNetworkAdapter VMName MonitorVM PortMirroring Destination
Q206. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically.
What should you do on Server1?
A. Configure the Discovery settings of the iSCSI initiator
B. Configure the security settings of the iSCSI target
C. Run the Set-Wmilnstance cmdlet
D. Run the Set-IscsiServerTarget cmdlet
Answer: C
Q207. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.
On DC1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM.
On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use IPAM on Server1 to manage DNS on DC1.
What should you do?
A. Add Server1 to the Remote Management Users group.
B. Modify the outbound firewall rules on Server1.
C. Add Server1 to the Event Log Readers group.
D. Modify the inbound firewall rules on Server1.
Answer: C
Explanation:
The exhibit shows (in the details tab) that firewall rules are OK for DNS management (DNS RPC Access Status Unblocked) But it shows too that Event log Access Status is blocked (which by the way blocks the IPAM Access Status) => We should solve this by adding the Server1 computer account to the Event Log Readers group Understand and Troubleshoot IP Address Management (IPAM) in Windows Server 8 Beta (download.microsoft.com) IPAM Access Monitoring
Q208. You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server 2012 R2.
You need to schedule the installation of Windows updates on the cluster nodes.
Which tool should you use?
A. The Add-CauClusterRolecmdlet
B. TheWuauclt command
C. TheWusa command
D. The Invoke-CauScancmdlet
Answer: D
Explanation:
The Invoke-CauScancmdlet performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates that would be applied to each node in a specified cluster.
http://technet.microsoft.com/en-us/library/hh847235(v=wps.620).aspx http://technet.microsoft.com/en-us/library/cc720477(v=ws.10).aspx http://support.microsoft.com/kb/934307 http://technet.microsoft.com/en-us/library/hh847228(v=wps.620).aspx
Q209. Your network contains two servers that run Windows Server 2012 R2 named Server1 and Server2. Both servers have the File Server role service installed.
On Server2, you create a share named Backups.
From Windows Server Backup on Server1, you schedule a full backup to run every night.
You set the backup destination to \\Server2 \Backups.
After several weeks, you discover that \\Server2\Backups only contains the last backup that
completed on Server1.
You need to ensure that multiple backups of Server1 are maintained.
What should you do?
A. Modify the properties of the Windows Store Service (WSService) service.
B. Change the backup destination.
C. Modify the Volume Shadow Copy Service (VSS) settings.
D. Configure the permission of the Backups share.
Answer: B
Q210. You have a DNS server named DNS1 that runs Windows Server 2012 R2.
On DNS1, you create a standard primary DNS zone named adatum.com.
You need to change the frequency that secondary name servers will replicate the zone
from DNS1.
Which type of DNS record should you modify?
A. Name server (NS)
B. Start of authority (SOA)
C. Host information (HINFO)
D. Service location (SRV)
Answer: B
Explanation:
The time to live is specified in the Start of Authority (SOA) record Note: TTL (time to live) - The number of seconds a domain name is cached locally before expiration and return to authoritative nameservers for updated information.