70-417 Exam
70 417 dumps : May 2021 Edition
Highest Quality of 70 417 pdf actual test materials and practice for Microsoft certification for IT engineers, Real Success Guaranteed with Updated exam 70 417 pdf dumps vce Materials. 100% PASS Upgrading Your Skills to MCSA Windows Server 2012 exam Today!
Q1. You have a datacenter that contains six servers. Each server has the Hyper-V server role installed and runs Windows Server 2012 R2. The servers are configured as shown in the following table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.
You need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1.
To which server and by which method should you move VM1?
A. To Host3 by using a storage migration
B. To Host6 by using a storage migration
C. To Host2 by using a live migration
D. To Host1 by using a quick migration
Answer: A
Explanation:
The processor vendors should be the same so Host2 and Host6 are not possible answers Local disk cannot be used neither so Host1 is not a possible answer neither For more information about VM storage migration: http://technet.microsoft.com/en-us/library/hh831656.aspx Virtual Machine Storage Migration Overview Applies To: Windows Server 2012 R2 In Windows Server 2008 R2, you can move a running instance of a virtual machine using live migration, but you are not able to move the virtual machine's storage while the virtual machine is running. Hyper-V in Windows Server 2012 R2 introduces support for moving virtual machine storage without downtime by making it possible to move the storage while the virtual machine remains running. You can perform this task by using a new wizard in Hyper-V Manager or by using new Hyper-V cmdlets for Windows PowerShell. You can add storage to either a stand-alone computer or to a Hyper-V cluster, and then move virtual machines to the new storage while the virtual machines continue to run. The most common reason for moving a virtual machine's storage is to update the physical storage that is available to Hyper-V. You can also move virtual machine storage between physical storage devices, at run time, to respond to reduced performance that results from bottlenecks in the storage throughput.
Key benefits Hyper-V in Windows Server 2012 R2 makes it possible to move virtual machine storage while a virtual machine is running. Requirements You need the following to use the Hyper-V functionality of moving virtual machine storage:
One or more installations of Windows Server 2012 R2 with the Hyper-V role installed. A server that is capable of running Hyper-V. Specifically, it must have processor support for hardware virtualization. Virtual machines that are configured to use only virtual hard disks for storage. NOTE: You cannot move the storage of a virtual machine when any of its storage is directly attached to a physical disk. Technical overview. This new feature allows you to move the virtual hard disks of a virtual machine while those virtual hard disks remain available for use by the running virtual machine. When you move a running virtual machine's virtual hard disks, Hyper-V performs the following steps, as shown in Figure 1: Throughout most of the move operation, disk reads and writes go to the source virtual hard disk. While reads and writes occur on the source virtual hard disk, the disk contents are copied to the new destination virtual hard disk. After the initial disk copy is complete, disk writes are mirrored to both the source and destination virtual hard disks while outstanding disk changes are replicated. After the source and destination virtual hard disks are completely synchronized, the virtual machine switches over to using the destination virtual hard disk. The source virtual hard disk is deleted.
Q2. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 has the IP Address Management (IPAM) Server feature installed.
A technician performs maintenance on Server1.
After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1.
You open the Services console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can connect to the IPAM server.
Which service should you start?
A. Windows Process Activation Service
B. Windows Event Collector
C. Windows Internal Database
D. Windows Store Service (WSService)
Answer: C
Q3. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA).
You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes:
Email security
Client authentication
Encrypting File System (EFS)
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Modify the properties of the User certificate template, and then publish the template.
B. From a Group Policy, configure the Certificate Services Client Certificate Enrollment Policy settings.
C. From a Group Policy, configure the Automatic Certificate Request Settings settings.
D. Duplicate the User certificate template, and then publish the template.
E. From a Group Policy, configure the Certificate Services Client Auto-Enrollment settings.
Answer: D,E
Explanation:
The default user template supports all of the requirements EXCEPT autoenroll as shown below:
However a duplicated template from users has the ability to autoenroll:
The Automatic Certificate Request Settings GPO setting is only available to Computer, not user.
Q4. Your network contains a server named Server1 that runs Windows Server 2012. Server1
has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144 Training Guide: Installing and Configuring Windows Server 2012: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p. 335
Q5. RAG DROP
Your network contains a single Active Directory domain named contoso.com. The domain contains an Active Directory site named Site1 and an organizational unit (OU) named OU1.
The domain contains a client computer named Client1 that is located in OU1 and Site1.
You create five Group Policy objects (GPO). The GPOs are configured as shown in the following table.
You need to identify in which order the GPOs will be applied to Client1.
In which order should you arrange the listed GPOs?
To answer, move all GPOs from the list of GPOs to the answer area and arrange them in
the correct order.
Answer:
Q6. OTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. The servers have the Hyper-V server role installed.
A certification authority (CA) is available on the network.
A virtual machine named vml.contoso.com is replicated from Server1 to Server2. A virtual
machine named vm2.contoso.com is replicated from Server2 to Server1.
You need to configure Hyper-V to encrypt the replication of the virtual machines.
Which common name should you use for the certificates on each server?
To answer, configure the appropriate common name for the certificate on each server in
the answer area.
Answer:
Q7. You are a network administrator of an Active Directory domain named contoso.com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the
DHCP Server server role and the Network Policy Server role service installed.
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1.
You need to create a DHCP policy that will apply to all of the NAP non-compliant DHCP
clients.
Which criteria should you specify when you create the DHCP policy?
A. The user class
B. The vendor class
C. The client identifier
D. The relay agent information
Answer: A
Q8. You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. You attach a 4-TB disk to Server1.
The disk is configured as an MBR disk. You need to ensure that you can create a 4-TB volume on the disk.
Which Diskpart command should you use?
A. Automount
B. Convert
C. Expand
D. Attach
Answer: B
Explanation:
You will need to convert the disk to a GPT since GPT disks allows for partitioning and not MBR disks.
References: Exam Ref 70-410: Installing and Configuring Windows Server 2012: Objective 3.2: Create and Configure virtual machine storage, Chapter 3: p. 159 Exam Ref 70-410: Installing and Configuring Server 2012: Objective 1.3: Installing and Configuring servers, Chapter 1: p. 42-43
Q9. After setting up several Active Directory users for different OU's, you discover that the IT technician has miss spelt the Office property as Londn instead of London.
Which tool should you use to correct the changes to all of the OU's at once?
A. Use Dsget and Dsmod
B. Use Dsquery and Dsmod
C. Use MoveTo or MoveHere
D. Multi select the users using the Ctrl key and opening Properties
Answer: B
Explanation:
You can use Dsquery to query AD users by property values. So in this case we could query on the miss spelt word London.
Q10. Your network contains an Active Directory domain named contoso.com. The domain contains three servers. The servers are configured as shown in the following table.
You need to ensure that end-to-end encryption is used between clients and Server2 when the clients connect to the network by using DirectAccess.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From the Remote Access Management Console, reload the configuration.
B. Add Server2 to a security group in Active Directory.
C. Restart the IPSec Policy Agent service on Server2.
D. From the Remote Access Management Console, modify the Infrastructure Servers settings.
E. From the Remote Access Management Console, modify the Application Servers settings.
Answer: B,E
Explanation:
Unsure about these answers:
A public key infrastructure must be deployed.
Windows Firewall must be enabled on all profiles.
ISATAP in the corporate network is not supported. If you are using ISATAP, you
should remove it and use native IPv6.
Computers that are running the following operating systems are supported as
... .
DirectAccess clients: Windows Server. 2012 R2 Windows 8.1 Enterprise Windows Server. 2012 Windows 8 Enterprise Windows Server. 2008 R2 Windows 7 Ultimate Windows 7 Enterprise
. Force tunnel configuration is not supported with KerbProxy authentication. . Changing policies by using a feature other than the DirectAccess management console or Windows PowerShell cmdlets is not supported. . Separating NAT64/DNS64 and IPHTTPS server roles on another server is not supported.