70-417 Exam
Facts about ms exam 70-417
Microsoft 70-417 Exercise Queries & Solutions in addition to Microsoft 70-417 Exercise study substances during Exambible will be updated often also using the current Microsoft 70-417 Test Targets and provide a person 100% accomplishment throughout 70-417 audit . That doesn?¡¥t run you an excessive amount to purchase Exambible Microsoft 70-417 whilst assisting you to cross a persons Microsoft 70-417 Qualification Test in your 1st try. Our own Microsoft 70-417 in addition to 70-417 cover 100% 70-417 Test Targets.
2021 Dec what is exam 70-417:
Q121. You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.
You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter. You want to achieve this goal by using the minimum amount of administrative effort.
What should you perform?
A. An online servicing by using Dism
B. An offline servicing by using Dism
C. An upgrade installation of Windows Server 2012 R2
D. A clean installation of Windows Server 2012 R2
Answer: A
Explanation:
A. Not least effort
B. Not least effort
C. dism /online /set-edition
D. offline would be less ideal and more workex: DISM /online /Set-Edition:ServerEnterprise / ProductKey:489J6-VHDMP-X63PK-3K798-CPX3YWindows Server 2008 R2/2012 contains a command-line utility called DISM (Deployment Image Servicing andManagement tool). This tool has many features, but one of those features is the ability to upgrade the edition ofWindows in use. Note that this process is for upgrades only and is irreversible. You cannot set a Windowsimage to a lower edition. The lowest edition will not appear when you run the /Get-TargetEditions option. If the server is running an evaluation version of Windows Server 2012 R2 Standard or Windows Server 2012 R2Datacenter, you can convert it to a retail version as follows: If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additionaldomain controller on a server that runs a retail version and remove AD DS from the domain controller thatruns on the evaluation version. From an elevated command prompt, determine the current edition name with the command DISM /online /Get-CurrentEdition. Make note of the edition ID, an abbreviated form of the edition name. Then run DISM /online /Set-Edition:<edition ID> /ProductKey:XXXXXXXXXX-XXXXX-XXXXXXXXXX /AcceptEula,providing the edition ID and a retail product key. The server will restart twice. http://technet.microsoft.com/en-us/library/jj574204.aspx http://technet.microsoft.com/en-us/library/dd744380%28v=ws.10%29.aspx http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading- windows-server2008-r2- without-media.aspx http://communities.vmware.com/people/vmroyale/blog/2012/05/30/howto-
upgradingwindows- edition-with-dism
Q122. Your network contains a domain controller named DC1 that runs Windows Server 2012 R2. You create a custom Data Collector Set (DCS) named DCS1.
You need to configure DCS1 to collect the following information:
. The amount of Active Directory data replicated between DC1 and the other domain controllers . The current values of several registry settings
Which two should you configure in DCS1? (Each correct answer presents part of the solution. Choose two.)
A. Event trace data
B. A Performance Counter Alert
C. System configuration information
D. A performance counter
Answer: C,D
Q123. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a server named Server1.
You install the Windows PowerShell Web Access gateway on Server1.
You need to provide administrators with the ability to manage the servers in the domain by using the Windows PowerShell Web Access gateway.
Which two cmdlets should you run on Server1? (Each correct answer presents part of the solution. Choose two.)
A. Install PswaWebApplication
B. Add PswaAuthorizationRule
C. Set-WSManlnstance
D. Set-WSManQuickConfig
E. Set-BCAuthentication
Answer: A,B
Explanation: Configure PowerShell Web Access Gateway using the following PowerShell Cmdlet. Install-PswaWebApplication –UseTestCertificate Running the cmdlet installs the Windows PowerShell Web Access web application within the IIS Default Web Site container. The cmdlet creates the infrastructure required to run Windows PowerShell Web Access on the default website, https://<server_name>/pswa. Add-PswaAuthorizationRule Adds a new authorization rule to the Windows PowerShell Web Access authorization rule set. Parameters: ComputerGroupName ComputerName ConfigurationName RuleName UserGroupName UserName Credential (Windows Server 2012 R2 and later)
References: http://technet.microsoft.com/en-us/library/hh849867.aspx http://technet.microsoft.com/en-us/library/hh849875.aspx http://technet.microsoft.com/en-us/library/jj592890(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh848404(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj592894(v=wps.620).aspx
Q124. Which one of the following groups has permission to shut down a domain controller?
A. Backup Operators
B. All of these
C. Print Operators D. Server Operators
Answer: B
Explanation:
Below is a screenshot of the default settings
Q125. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Stop Action
C. Automatic Start Action
D. Integration Services
Answer: B
Explanation: The Automatic Stop Action setting should be modified because it will allow you to configure: “Save the virtual machine state” option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down. OR “Turn Off the virtual machine” is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR “Shut down the guest operating system” is successful only if the “Hyper-V Shutdown” guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
References: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
Far out cbt nuggets videos 70-417:
Q126. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP
Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP clients. The solution must minimize administrative effort.
What should you do?
A. Create a superscope and a filter.
B. Create a superscope and scope-level policies.
C. Configure the Server Options.
D. Configure the Scope Options.
Answer: D
Q127. RAG DROP
Answer:
Q128. Your network contains two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. On Server1, you create a Data Collector Set (DCS) named Data1.
You need to export Data1 to Server2.
What should you do first?
A. Right-click Data1 and click Save template...
B. Right-click Data1 and click Export list...
C. Right-click Data1 and click Data Manager...
D. Right-click Data1 and click Properties.
Answer: A
Explanation: Exporting Templates To export a Data Collector Set you create as a template for use on other computers, open Windows Performance Monitor, expand Data Collector Sets, right-click the Data Collector Set you want to export, and click Save Template . Select a directory in which to store the XML file and click Save .
Reference: Create a Data Collector Set from a Template
Q129. You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit. (Click the Exhibit button.)
You need to create a storage pool that contains Disk 1 and Disk 2. What should you do first?
A. Convert Disk 1 and Disk 2 to GPT disks
B. Create a volume on Disk 2
C. Convert Disk 1 and Disk 2 to dynamic disks
D. Delete volume E
Answer: D
Explanation:
Storage Pools use unallocated space thus you need to delete Volume E.
References:
http://technet.microsoft.com/en-us/library/ff399688.aspx
Q130. Which terminology is being described below?
These trusts are sometimes necessary when users need access to resources that are located in a Windows NT 4.0 domain or in a domain that is in a separate Active Directory Domain Services (AD DS) forest that is not joined by a forest trust.
A. Shortcut Trusts
B. Realm Trusts
C. Forest Trusts
D. External Trust
Answer: D
Explanation:
You can create an external trust to form a one-way or two-way, nontransitive trust with domains that are outside your forest http://technet.microsoft.com/enus/library/cc775736%28v=ws.10%29.aspx Trust types
http://technet.microsoft.com/en-us/library/cc731297.aspx Understanding When to Create a Realm Trust When to create a realm trust You can establish a realm trust between any non-Windows Kerberos version 5 (V5) realm and an Active Directory domain. This trust relationship allows cross-platform interoperability with security services that are based on other versions of the Kerberos V5 protocol, for example, UNIX and MIT implementations. Realm trusts can switch from non transitive to transitive and back. Realm trusts can also be either one-way or two way.