70-533 Exam
Tips for 70 533 dumps pdf
Pass4sure 70 533 pdf Questions are updated and all 70 533 dumps pdf answers are verified by experts. Once you have completely prepared with our 70 533 vce exam prep kits you will be ready for the real exam ref 70 533 implementing microsoft azure infrastructure solutions exam without a problem. We have Regenerate Microsoft azure 70 533 dumps study guide. PASSED 70 533 study guide First attempt! Here What I Did.
Q21. You manage an Azure Web Site named contosoweb. Logging is enabled for contosoweb.
You need to view only errors from your log files in a continuous stream as they occur.
Which Windows Power Shell command should you execute?
A. Get-AzureWebSiteLog -Name contosoweb -OutBuffer Error
B. Save-AzureWebSiteLog -Name contosoweb -Output Errors
C. Get-AzureWebSiteLog -Name contosoweb -Tail –Message Error
D. Get-Azure WebSiteLog -Name contosoweb -Message Error
Answer: C
Explanation: Example
This example starts log streaming and show error logs only.
Windows PowerShell
C:\PS>Get-AzureWebsiteLog -Tail -Message Error
Reference: Get-AzureWebsiteLog
URL: http://msdn.microsoft.com/en-us/library/dn495187.aspx
Q22. DRAG DROP
You plan to deploy a cloud service named contosoapp that has a web role named contosoweb and a worker role named contosoimagepurge.
You need to ensure the service meets the following requirements:
. Contosoweb can be accessed over the Internet by using http.
. Contosoimagepurge can only be accessed through tcp port 5001 from
contosoweb.
. Contosoimagepurge cannot be accessed directly over the Internet.
Which configuration should you use? To answer, drag the appropriate configuration setting to the correct location in the service configuration file. Each configuration setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q23. Your company network includes an On-Premises Windows Active Directory (AD) that has a DNS domain named contoso.local and an email domain named contoso.com. You plan to migrate from On-Premises Exchange to Office 365.
You configure DirSync and set all Azure Active Directory {Azure AD)
usernames as %username%@contoso.com
You need to ensure that each user is able to log on by using the email domain as the username.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Verify the email domain in Azure AD domains.
B. Run the Set-MsolUserPnncipalName -UserPnncipalName %username%@co ntoso.onmicrosoft.com -NewUserPrincipalName %usemame %@contoso.com Power Shell cmdlet.
C. Edit the ProxyAddress attribute on the On-Premises Windows AD user account.
D. Verify the Windows AD DNS domain in Azure AD domains.
E. Update the On-Premises Windows AD user account UPN to match the email address.
Answer: C,D
Explanation: * There are two main traffic flows originating from the server hosting the Azure Active Directory Sync tool: The Azure Active Directory Sync tool queries a domain controller on the on-premises network for changes to accounts and passwords. The Azure Active Directory Sync tool sends the changes to accounts and passwords to the Azure AD instance of your Office 365 subscription. These changes are sent through the on-premises network’s proxy server.
* Verify that your virtual machine is joined to the domain by checking your internal DNS to make sure that an Address (A) record was added for the virtual machine with the correct IP address from Azure. For the Azure Active Directory Sync tool to gain access to Internet resources, you must configure the server that runs the Azure Active Directory Sync tool to use the on-premises network's proxy server.
Reference: Deploy Office 365 Directory Synchronization in Microsoft Azure
Q24. DRAG DROP
You administer a cloud service named contosoapp that has a web role and worker role.
Contosoapp requires you to perform an in-place upgrade to the service.
You need to ensure that at least six worker role instances and eight web role instances are available when you apply upgrades to the service. You also need to ensure that updates are completed for all instances by using the least amount of time.
Which value should you use with each configuration? To answer, drag the appropriate value to the correct configuration. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q25. Your company has two physical locations configured in a geo-clustered environment that includes:
System Center Virtual Machine Manager 2012 R2
System Center Data Protection Manager 2012 R2
SQL Server 2012
Windows Server 2012 R2 Hyper-V
Over 100 virtual machines (VMs) in each physical location
Your company has recently signed up for Azure.
You plan to leverage your current network environment to provide a backup solution for your VMs.
You need to recommend a solution that ensures all VMs are redundant and deployable between locations. You also want the solution to minimize downtime in the event of an outage at either physical location.
Which solution should you recommend?
A. Configure a backup vault in Azure and use Data Protection Manager to back up The Windows Servers.
B. Use Data Protection Manager and back up the VMs in each location.
C. Use Azure site recovery in an on-premises to Azure protection configuration.
D. Use Azure site recovery in an on-premises to on-premises protection configuration.
Answer: D
Explanation: On-Premises to On-Premises (Hyper-V replication)
* Cloud metadata is sent to Azure Site Recovery.
Replicated data is stored in location specified on target Hyper-V server.
* Azure account with Azure Site Recovery enabled.
* Virtual machines replicate from source on-premises Hyper-V server to another. You can set up reverse replication to replicate back to the source location.
* Requires source and target VMM servers with at least one cloud on each, or a single VMM server with two clouds. Clouds must contain at least one Hyper-V host server or cluster.
Reference: Microsoft Azure, Site Recovery
Q26. You manage a cloud service that has a web application named WebRole1. WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred. Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the WebRole1 web.config file.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtension PowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Create a storage account.
Answer: A,C,F
Explanation: AF: You can monitor key performance metrics for your cloud services in the Azure Management Portal. You can set the level of monitoring to minimal and verbose for each service role, and can customize the monitoring displays. Verbose monitoring data is stored in a storage account, which you can access outside the portal.
* The service configuration file specifies the number of role instances to deploy for each role in the service, the values of any configuration settings, and the thumbprints for any certificates associated with a role. If the service is part of a Virtual Network, configuration information for the network must be provided in the service configuration file, as well as in the virtual networking configuration file. The default extension for the service configuration file is .cscfg.
* The service definition file defines the service model for an application. The file contains the definitions for the roles that are available to a cloud service, specifies the service endpoints, and establishes configuration settings for the service.
URLs:
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ http://msdn.microsoft.com/en-us/library/azure/ee758710.aspx http://msdn.microsoft.com/en-us/library/azure/ee758711.aspx
Q27. You manage an application deployed to virtual machines (VMs) on an Azure virtual network
named corpVnet1.
You plan to hire several remote employees who will need access to the application on corpVnet1.
You need to ensure that new employees can access corpVnet1. You want to achieve this goal by using the most cost effective solution.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Create a VPN subnet.
B. Enable point-to-point connectivity for corpVnet1.
C. Enable point-to-site connectivity for corpVnet1.
D. Create a gateway subnet.
E. Enable site-to-site connectivity for corpVnet1.
F. Convert corpVnet1 to a regional virtual network.
Answer: A,C
Explanation:
A point-to-site VPN also allows you to create a secure connection to your virtual network. In a point-to-site configuration, the connection is configured individually on each client computer that you want to connect to the virtual network. Point-to-site connections do not require a VPN device. They work by using a VPN client that you install on each client computer. The VPN is established by manually starting the connection from the on-premises client computer. You can also configure the VPN client to automatically restart.
Reference: About Secure Cross-Premises Connectivity
Q28. You manage a cloud service on two instances. The service name is Service1 and the role name is ServiceRole1.
Service1 has performance issues during heavy traffic periods.
You need to increase the existing deployment of Service1 to three instances.
Which Power Shell cmdlet should you use?
A. PS C:\>Set-AzureService -ServiceName "Service1” -Label "ServiceRole1' -Description "Instance count=3"
B. PS C:\>Set-AzureRole -ServiceName "Service1" -Slot "Production” -RoleName "ServiceRole1" -Count 3
C. PS C:\>Add-AzureWebRole -Name 'ServiceRole1" -Instances 3
D. PS C:\> $instancecount = New-Object Hashtable$settings['INSTANCECOUNT=3] PS C:\> Set-AzureWebsite -AppSettings $instancecount ServiceRole1
Answer: B
Explanation: The Set-AzureRole cmdlet sets the number of instances of a specified role to run in an Azure deployment
Example This command sets the "MyTestRole3" role running in production on the "MySvc1" service to three instances.
Windows PowerShell C:\PS>Set-AzureRole –ServiceName "MySvc1" –Slot "Production" –RoleName
"MyTestRole3" –Count 3 Reference: Set-AzureRole
Q29. You administer a cloud service.
You plan to host two web applications named contosoweb and contosowebsupport.
You need to ensure that you can host both applications and qualify for the Azure Service
Level Agreement. You want to achieve this goal while minimizing costs.
How should you host both applications?
A. in different web roles with two instances in each web role
B. in the same web role with two instances
C. in different web roles with one instance in each web role
D. in the same web role with one instance
Answer: B
Explanation: A cloud service must have at least two instances of every role to qualify for the Azure Service Level Agreement, which guarantees external connectivity to your Internet-facing roles at least 99.95 percent of the time.
Reference: Azure, What is a cloud service?
URL: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-what-is/
Q30. HOTSPOT
Your company network has two branch offices. Some employees work remotely, including at public locations. You manage an Azure environment that includes several virtual networks.
All users require access to the virtual networks.
In the table below, identify which secure cross-premise connectivity option is needed for each type of user. Make only one selection in each column.
Answer: