getcertified4sure.com

Top Microsoft 70-680 pdf Choices




Just click the mouse at Exambible and each of our workers confirm your payment, you are going to get the quick access towards the whole Microsoft 70-680 training materials. Create full usage of the totally free Pdf demos. Download the analyze engine software on the PC and practice the particular test everyday. Make records on the blunders and shell out more attention on them. We promise that you just will have a high passing tag based on each of our updated Microsoft Microsoft exam braindumps.

2021 Mar 70-680 practice

Q51. DRAG DROP - (Topic 5) 

A computer that runs Windows XP has one partition. You install Windows 7 on the computer. 

You need to migrate a user profile from the Windows XP installation to the Windows 7 installation. 

What should you do? (To answer, drag the appropriate command from the list of commands to the correct location or locations in the work area.) 

Answer: 


Q52. - (Topic 3) 

You have a computer that runs Windows 7. 

You need to capture the operating system and all the computer configurations to a Windows image (WIM) file. 

What should you do before you capture the image? 

A. Run Oscdimg.exe. 

B. Run Windows System Image Manager (Windows SIM). 

C. Open a command prompt that has elevated privileges. 

D. Start the computer by using Windows Preinstallation Environment (Windows PE). 

Answer:

Explanation: 

Windows PE To access a network share as an installation source from the client computer, you need to boot the client computer into the Windows Preintallation Environment 

(Windows PE) environment. The Windows PE environment is a minimally featured operating system that allows you to access diagnostic and maintenance tools as well as access network drives. Once you have successfully booted into the Windows PE environment, you can connect to the network share and begin the installation by running Setup.exe.NOT Windows SIMOpens Windows images, creates answer files, and manages distribution shares and configuration sets.NOT OscdimgOscdimg is a command-line tool for creating an image file (.iso) of a customized 32-bit or 64-bit version of Windows PE. You can then burn that .iso file to a CD-ROM or DVD-ROM. Oscdimg supports ISO 9660, Joliet, and Universal Disk Format (UDF) file systems. 


Q53. HOTSPOT - (Topic 5) 

You need to uninstall a Windows update from a computer that runs Windows 7. 

Which Control Panel item should you use? (To answer, select the appropriate item in the Control Panel in the answer area.) 

Answer: 


Q54. - (Topic 2) 

You have an answer file for a Windows 7 installation. 

You need to perform an unattended installation of Windows 7 by using the answer file. 

You must achieve this goal by using the minimum amount of administrative effort. 

What should you do? 

A. Name the answer file autounattend.ini and save it to a USB disk. Start the computer from the Windows 7 DVD. 

B. Name the answer file unattend.txt and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (Windows PE). 

C. Name the answer file autounattend.xml and save it to a USB disk. Start the computer from the Windows 7 DVD. 

D. Name the answer file unattend.xml and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (Windows PE). 

Answer:

Explanation: 

Unattended installation You can perform an unattended installation of Windows 7 by using an installation file called Unattend.xml. These installation files store answers to the questions asked by the Setup Wizard. When the Windows 7 installation process starts, Windows checks for attached USB storage devices that have this file in their root directory. Unattended installations are suitable when you need to deploy Windows 7 to a large number of computers because you do not have to interact with them manually, responding to prompts, as the installation progresses.Building a Reference Installation You configure your reference computer with a customized installation of Windows 7 that you then duplicate onto one or more destination computers. You can create a reference installation by using the Windows product DVD and (optionally) the answer file you created in the previous section. To install your reference computer using an answer file, perform the following procedure: 

1. Turn on the reference computer. Insert the Windows 7 product DVD and the UFD containing the answer file (Autounattend.xml) that you created in the previous section. Note that the use of an answer file is optional, although it is the method Microsoft recommends. If you prefer, you can install Windows 7 manually from the installation DVD-ROM. 

2. Restart the computer by pressing CTRL+ALT+DEL. You may have to override the boot order to boot from the CD/DVD-ROM disk. If so, select the appropriate function key to override the boot order during initial boot. Windows Setup (Setup.exe) starts automatically and searches the root directory of all removable media for an answer file called Autounattend.xml. 

3. After Setup finishes, you can validate that all customizations were applied. For example, if you included the optional Microsoft-Windows-IE-InternetExplorer feature and set the Home_Page setting in your answer file, you can verify these settings by opening Internet Explorer. 

4. To prepare the reference computer for the user, you use the Sysprep utility with the /generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart. 


Q55. - (Topic 5) 

You use a computer that has Windows 7 SP1 installed. The computer has a shared folder named C:\Software. 

User1 is a local user account on the computer. The account is a member of several groups that have access to the C:\Software folder. 

You need to verify whether User1 can save files to C:\Software. 

What should you do? 

A. Run the Net View command. 

B. view the Share permissions on C:\Software. 

C. in the Advanced Security Settings for the Documents folder, select the Effective Permissions tab. 

D. Run the Wfs C:\Software command. 

Answer:


Up to date 70-680 simulations:

Q56. - (Topic 4) 

YOU need to identify the hardware failures have occurred on your computer in the past six months. 

What should you do? 

A. From the Control Panel, open Troubleshooting. 

B. From the Control Panel, open Performance Information and Tools. 

C. From the Action Center, open Recovery. 

D. From the Action Center, under Maintenance, click View reliability history. 

Answer:


Q57. - (Topic 2) 

You have a computer that runs windows 7. You have a system image of the computer. You need to restore a single file from the system image. You must achieve the goal using minimum administrative effort. What should you do? 

A. From Disk Management, select Attach VHD. 

B. From the Backup and Restore, select restore my files. 

C. Restart the computer and run system restore. 

D. Restart the computer and run system image recovery. 

Answer:

Explanation: 

Attach VHD: Attaching a VHD activates the VHD so that it appears on the host computer as a local hard disk drive. This is sometimes called "surfacing a VHD" because the VHD is now visible to users. If the VHD already has a disk partition and file system volume when you attach it, the volume inside the VHD is assigned a drive letter. The assigned drive letter is then available for use, similar to when you insert a USB flash drive into a USB connector. All users (not just the current user) can use the attached VHD in the same way they use other volumes on local physical hard disk drives (depending on security permissions). Furthermore, because you can attach a VHD that is located on a remote server message block (SMB), you can manage your images remotely. Once attached the single file can be restored. The other answers are overkill or replace all files not just the one required. 

http://technet.microsoft.com/en-us/library/dd440865%28WS.10%29.aspx 

What is system protection? System protection is a feature that regularly creates and saves information about your computer's system files and settings. System protection also saves previous versions of files that you've modified. It saves these files in restore points, which are created just before significant system events, such as the installation of a program or device driver. They're also created automatically once every seven days if no other restore points were created in the previous seven days, but you can create restore points manually at any time. 

System protection is automatically on for the drive that Windows is installed on. System protection can only be turned on for drives that are formatted using the NTFS file system. 

There are two ways that you can take advantage of system protection: 

* If your computer is running slowly or isn't working properly, you can use System Restore to return your computer's system files and settings to an earlier point in time using a restore point. 

* If you accidentally modify or delete a file or folder, you can restore it to a previous version that's saved as part of a restore point. 


Q58. DRAG DROP - (Topic 6) 

You work for Contoso. Ltd. as part of a Windows 7 deployment team. 

You create a new Windows Preinstallation Environment image. The image file is located at N:\images\winpe_x86 and is named WinPE.wim. An unsigned driver is located at 

N:\Drivers\Driverl.inf. 

You need to include the driver in the WinPE.wim image. 

Which four actions should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order.) 

Answer: 


Q59. - (Topic 6) 

Your company has Windows 7 Enterprise computers that do not have a Trusted Platform Module (TPM) installed. 

You need to enable BitLocker drive encryption on the operating system drives. 

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) 

A. Create a USB startup key. 

B. Configure the Require additional authentication at startup group policy setting. 

C. Create a network key location. 

D. Configure the Allow enhanced PINs for startup group policy setting. 

Answer: A,D 

Explanation: Ref: http://technet.microsoft.com/en-us/library/ee424319(v=WS.10).aspx 


Q60. - (Topic 3) 

You have a computer that runs Windows 7. 

You add a new hard disk drive to the computer and create a new NTFS partition. 

You need to ensure that you can use the Previous Versions feature on the new drive. 

What should you do? 

A. From Disk Management, convert the new disk to a dynamic disk. 

B. From System Properties, configure the System Protection settings. 

C. From System and Security, enable BitLocker Drive Encryption (BitLocker). 

D. From the properties of the new drive, create a share and modify the caching settings. 

Answer:

Explanation: 

System protection might not be turned on for the drive. If system protection is not turned on, Windows can't create previous versions.To turn on system protection: 

1. Click to open System.2. In the left pane, click System protection. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.3. Click the drive, and then click Configure.4. Click Restore system settings and previous versions of files, and then click OK.