Proper study guides for Renewal Microsoft TS:Windows 7,Configuring certified begins with Microsoft 70 680 practice test preparation products which designed to deliver the 100% Correct exam 70 680 questions by making you pass the exam 70 680 test at your first time. Try the free 70 680 exam demo right now.
Q301. - (Topic 3)
You have an offline virtual hard disk (VHD) that contains an installation of Windows 7 Home Premium.
You need to upgrade the installation to Windows 7 Ultimate by using the minimum amount of administrative effort.
What should you do?
A. From a computer that runs Windows 7, attach the VHD. Run Imagex.exe and specify the /apply parameter.
B. From a computer that runs Windows 7, attach the VHD. Run Dism.exe and specify the /set-edition parameter.
C. Deploy the VHD to a new computer and upgrade the computer to Windows 7 Ultimate. Run Dism.exe and specify the /image parameter.
D. Deploy the VHD to a new computer and upgrade the computer to Windows 7 Ultimate. Run Imagex.exe and specify the /capture parameter.
Answer: B
Explanation:
Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing.
You can use DISM to perform the following actions:
-Prepare a Windows PE image.
-Enable or disable Windows features within an image.
-Upgrade a Windows image to a different edition.
-Add, remove, and enumerate packages.
-Add, remove, and enumerate drivers.
-Apply changes based on the offline servicing section of an unattended answer file.
-Configure international settings.
-Implement powerful logging features.
-Service operating systems such as Windows Vista with SP1 and Windows Server 2008.
-Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.
-Service all platforms (32-bit, 64-bit, and Itanium).
-Use existing Package Manager scripts.
Use the /Set-Edition option without the /ProductKey option to change an offline Windows image to a higher edition. Use /Get-TargetEditions to find the edition ID. Use the /Set-Edition option with the /ProductKey option only to change a running Windows Server. 2008 R2 operating system to a higher edition.
Q302. - (Topic 2)
You have a computer that runs Windows 7. The computer's disk is configured as shown in the exhibit. (Click the Exhibit button.)
You need to extend volume C.
What should you do first?
A. Back up and delete volume D.
B. Convert disk 0 to a dynamic disk.
C. Remove the crash dump from volume C.
D. Move the paging file from volume C to volume E.
Answer: A
Explanation:
Extend a Basic Volume You can add more space to existing primary partitions and logical drives by extending them into adjacent unallocated space on the same disk. To extend a basic volume, it must be raw or formatted with the NTFS file system. You can extend a logical drive within contiguous free space in the extended partition that contains it. If you extend a logical drive beyond the free space available in the extended partition, the extended partition grows to contain the logical drive. For logical drives, boot, or system volumes, you can extend the volume only into contiguous space and only if the disk can be upgraded to a dynamic disk. For other volumes, you can extend the volume into noncontiguous space, but you will be prompted to convert the disk to dynamic.
Q303. - (Topic 3)
You need to create a VPN connection.
What should you do?
A. From Windows Explorer, right-click Computer and then click Map network drive.
B. From Windows Explorer, right-click Computer and then click Add a network location.
C. From Network and Sharing Center, click Set up a new connection or network and then click Set up a new network.
D. From Network and Sharing Center, click Set up a new connection or network and then click Connect to a workplace.
Answer: D
Explanation:
Virtual Private Networks When you create a VPN connection, you need to specify the address of the VPN server that you are connecting to and your authentication credentials. You can create a new VPN connection in the Network And Sharing Center by clicking Set Up A New Connection Or Network and then Connect to a Workplace. When you create a new VPN connection, Windows 7 sets the VPN type to Automatic. You can configure a connection to use a specific VPN protocol, but if you do this, Windows 7 does not try to use other VPN protocols if the protocol you select is not available.
Q304. - (Topic 4)
You administer a desktop computer that has the following hardware specifications:
Dual-core 2.5GHz processor
1GB RAM
25GB unpartitioned disk space
Onboard graphics that has WDDM 1.0
You install a customized Windows 7 Enterprise 64-bit image on the computer by using unpartitioned disk space. The computer operates unacceptably slow.
You need to improve the performance of the computer.
What should you do?
A. Upgrade the RAM to 1 GB.
B. OpenTaks Manager. Set the priority of all SYSTEM processes to High.
C. Open Performance Monitor. Run the System Performance Data Collector Set.
D. Perform the initial Windows Experience Index Run.
Answer: A
Explanation:
http://windows.microsoft.com/en-us/windows7/products/system-requirements Should have 2GB RAM as a minimum.
Q305. - (Topic 3)
You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7.
You attempt to migrate the user profiles and data from Computer1 to Computer2 by using User State Migration Tool (USMT) 4.0.
During the migration, you receive the following error message: "Gather was aborted because of an EFS file."
You need to ensure that you can successfully migrate the user state from Computer 1 to Computer 2.
What should you do?
A. Add the /efs:copyraw switch to the Loadstate command.
B. Add the /efs:copyraw switch to the Scanstate command.
C. Generate a new Encrypting File System (EFS) certificate on Computer2.
D. Export the Encrypting File System (EFS) certificate from Computer1 and import the certificate to Computer2.
Answer: B
Explanation:
You run ScanState on the source computer during the migration. You must run ScanState.exe on computers running Windows Vista and Windows 7 from an administrative command prompt. When running ScanState on a source computer that has Windows XP installed, you need to run it as a user that is a member of the local administrators group. The following command creates an encrypted store named Mystore on the file share named Migration on the file server named Fileserver that uses the encryption key Mykey: scanstate \\fileserver\migration\mystore /i:migapp.xml /i:miguser.xml /o /config:config.xml /encrypt /key:"mykey"Encrypted File OptionsYou can use the following options to migrate encrypted files. In all cases, by default, USMT 4.0 fails if an encrypted file is found unless you specify an /efs option. To migrate encrypted files, you must change the default behavior. EFS certificates will be migrated automatically when migrating to Windows Vista or Windows 7. Therefore, you should specify the /efs:copyraw option with the ScanState command to migrate the encrypted files
Q306. - (Topic 5)
You administer computers that have Windows 7 and Internet Explorer 8 installed.
You want to log on to one of the computers and access a web-based management application that runs on a server by using Internet Explorer.
You need to ensure that any data about your browser session is not saved on the computer.
What should you do?
A. From the Safety drop-down menu, configure InPrivate Filtering.
B. Start the Microsoft Network Access Protection service.
C. From Internet Options, select Delete browsing history on exit.
D. From Internet Options, on the Advanced tab, clear Enable DOM Storage.
Answer: C
Q307. - (Topic 2)
You have a customized image of Windows 7 Professional.
You need to create a new unattended file to automate the deployment of the image. You must achieve this goal by using the minimum amount of administrative effort.
What should you do first?
A. Run Imagex.exe and specify the /mount parameter.
B. Run Dism.exe and specify the /mount-WIM parameter.
C. From Microsoft Deployment Toolkit (MDT), add the custom Windows image (WIM).
D. From Windows System Image Manager (Windows SIM), open the custom Windows image (WIM).
Answer: D
Explanation:
Windows SIMOpens Windows images, creates answer files, and manages distribution shares and configuration sets.NOT DismDeployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system.NOT ImagexImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack./mountMounts a .wim file from Windows XP with Service Pack 2 (SP2), Windows Server 2003 with Service Pack 1 (SP1), or Windows Vista with read-only permission to a specified directory. Once the file is mounted, you may view, but not modify, all the information contained in the directory.NOT MDT MDT 2010 is the Microsoft solution accelerator for operating system and application deployment and offers flexible driver management, optimized transaction processing, and access to distribution shares from any location. You can use the MDT on imaging and deployment servers to implement the automatic deployment of Windows 7 (for example) on client computers. It is possible to run MDT 2010 on a client running Windows 7, but in practice it would typically run from a distribution server running Windows Server 2008. The MDT provides detailed guidance and job aids and offers a common deployment console that contains unified tools and processes that you can use for client and server deployment. The toolkit offers standardized desktop and server images, along with improved security and ongoing configuration management.
Q308. - (Topic 3)
You have a computer that runs Windows 7 and Windows Internet Explorer 8. You have a third-party Internet Explorer toolbar installed on the computer.
You need to temporarily disable the toolbar. The solution must not affect any other installed toolbars.
What should you do?
A. Start an Inprivate Browsing session.
B. Run Msconfig.exe and enable Selective Startup.
C. From the Tools menu, select Compatibility View Settings.
D. From the Tools menu, open Manage Add-ons and modify the add-on settings.
Answer: D
Explanation:
Add-Ons and Search Providers Add-ons extend the functionality of Internet Explorer. Add-ons are usually downloaded and installed separately rather than being included with Internet Explorer. You manage add-ons through the Manage Add-Ons dialog box.
Toolbars and Extensions This area lists browser toolbars and extensions. Toolbars are additions to browsersthat add extra functionality to the browser interface. Extensions allow the browser to perform additional functions, such as playing media or opening some types of document file within the browser that the browser does not support natively.
Q309. - (Topic 5)
Your company network contains 20 client computers that run Windows 7 Enterprise. The network does not have a DNS server and is using IPv6 only.
Users are complaining they are unable to see others' computers on the network.
You notice that the settings of the network are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users can see all computers on the network in Windows Explorer.
What should you do on each computer?
A. Turn on Public folder sharing.
B. From a command prompt, run the net view command.
C. Turn on Network discovery.
D. Run Windows Network Diagnostics.
E. From a command prompt, run the net config command
Answer: C
Q310. - (Topic 4)
Your company network includes a Windows Server 2008 R2 server named Server1 and client computers that have Windows 7 installed. All computers are members of an Active Directory domain. You use a computer named Client1.
You plan to collect events from Client1 on Server1 by using HTTPS. On Server1, you start and configure the Windows Event Collector service. ON Client1, you start the Windows Remote Management Service.
You discover that no events are being collected.
You need to ensure that events are forwarded from Client1 to Server1.
What should you do?
A. On Client1, create an inbound rule to allow port 5986 for the Public connection type.
B. On Server1, create a Windows Event Collector firewall exception for the connection type.
C. On Client1, create an outbound Rule to allow port 443 for the Domain connection type.
D. ON Client1, create an inbound rule to allow port 5986 for the Domain connection type.
Answer: D