Want to know Ucertify 70 680 practice test Exam practice test features? Want to lear more about Microsoft TS:Windows 7,Configuring certification experience? Study Pinpoint Microsoft mcts 70 680 answers to Leading 70 680 practice test questions at Ucertify. Gat a success with an absolute guarantee to pass Microsoft 70 680 exam (TS:Windows 7,Configuring) test on your first attempt.
Q101. - (Topic 1)
You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive is connected to a RAID controller.
During the installation, you discover that the Windows 7 installation media does not include the files required to install the RAID controller.
You need ensure that you can install Windows 7 on the hard disk drive.
What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).
Answer: C
Explanation:
If your computer has special disk drive hardware, such as a redundant array of independent disks (RAID) array, it may be necessary to use the Load Driver option. It is necessary to use this option only if the disk that you want to install Windows on is not shown as a possible install location. If your disk is shown as an available option, Windows 7 has already loaded the appropriate drivers. Once you select the location where you want to install Windows 7, the Windows 7 installation process begins.
Q102. - (Topic 1)
Which of the following is not a Windows PE tool?
A. Diskpart
B. Oscdimg
C. Winpeshl
D. None of the above.
Answer: D
Q103. - (Topic 2)
Kim Akers has an administrator account on a computer running Windows 7 Enterprise.
Don Hall has a standard account on the same computer. Both users have Microsoft Office Word and Microsoft Office Excel files saved in their Documents library. Don stores Microsoft Office PowerPoint presentations in a subfolder of his Documents library named Presentations. He also stores digital photographs in his Pictures library.
Don has created a folder called Secret in his Documents library and has encrypted the folder and its contents. He stores confidential files in that folder.
When Don last logged on, he deleted some personal files but did not empty his Recycle Bin.
Kim is logged on to the computer. She has plugged in a USB flash memory device that holds personal files but has not yet copied any of these files to the computer. She has never formatted the flash memory device.
The computer is configured to let Windows decide what files and folders to back up.
Kim opens the Backup And Restore console but does not change any settings. She clicks Backup Now.
Which files are backed up? (Choose all that apply.)
A. The Word and Excel files in Don's Documents library
B. The Word and Excel files in Kim's Documents library
C. The PowerPoint files in Don's Presentation folder
D. The digital photographs in Don's Pictures library
E. The files in Don's Secret folder
F. The files in Don's Recycle Bin
G. The files on Kim's USB flash memory device
Answer: A,B,C,D
Q104. - (Topic 3)
You download a Windows PowerShell snap-in.
You need to ensure that the snap-in is automatically imported when you open a new PowerShell session.
What should you do?
A. Modify the PowerShell execution policy.
B. Create a new PowerShell manifest file. Update the PowerShell shortcut and specify the file option.
C. Create a new PowerShell console file. Update the PowerShell shortcut and specify the psconsolefile option.
D. Create a new PowerShell formatting and type file. Copy the file to the %SystemRoot%\system32 \WindowsPowerShell\v1.0 folder.
Answer: C
Explanation:
PSConsoleFile Loads the specified Windows PowerShell console file. To create a console file, use the Export-Console cmdlet in Windows PowerShell.
Export-Console The Export-Console cmdlet exports the names of the Windows PowerShell snap-ins in the current session to a Windows PowerShell console file (.psc1). You can use this cmdlet to save the snap-ins for use in future sessions. To add the snap-ins in the .psc1 console file to a session, start Windows PowerShell (Powershell.exe) at the command line by using Cmd.exe or another Windows PowerShell session, and then use the PSConsoleFile parameter of Powershell.exe to specify the console file.
Q105. - (Topic 1)
Which of the following is not a minimum requirement to install Windows 7?
A. 1 GHz or faster 32-bit (x86) or a 64-bit (x64) processor
B. 4GB RAM (32-bit)/2 GB RAM (64-bit)
C. 16 GB available disk space (32-bit)/20 GB (64-bit)
D. DirectX 9 graphics processor with WDDM 1.0 or higher driver.
Answer: B
Q106. - (Topic 4)
YOU need to identify the hardware failures have occurred on your computer in the past six months.
What should you do?
A. From the Control Panel, open Troubleshooting.
B. From the Control Panel, open Performance Information and Tools.
C. From the Action Center, open Recovery.
D. From the Action Center, under Maintenance, click View reliability history.
Answer: D
Q107. - (Topic 3)
Your network contains computers that run either Windows Vista (x86) or Windows 7 (x86). All computers are joined to a domain.
You install a computer named Computer1 that runs Windows 7 (64-bit). You share a printer named Printer1 on Computer1.
You need to ensure that any user can automatically download and install the drivers for Printer1.
What should you do from Printer Properties?
A. Install a new driver.
B. Enable bidirectional support.
C. Modify the Additional Drivers settings.
D. Assign the Manage this printer permission to the Domain Users group.
Answer: C
Explanation:
If you are going to be sharing a printer with computers running previous versions of Microsoft Windows, you can add the drivers for the printer using Additional Drivers. When you add additional drivers, other computers on the network that do not have the printer drivers installed are able to download them from the computer that is sharing the printer.
Q108. - (Topic 3)
You need to create a virtual hard disk (VHD) file that will be used to deploy Windows 7. The solution must minimize the performance impact caused by using a VHD.
Which type of VHD should you create?
A. differencing disk
B. dynamically expanding disk
C. fixed-size disk
D. snapshot
Answer: C
Explanation: Typically, you place the VHD on a second internal or external hard disk (although this is not essential). You then specify the VHD size and format settings. Microsoft recommends the default Fixed Size setting, but you can select Dynamic Expanding if you do not want to allocate the disk space. Fixed Size gives better performance and is more suitable in a production environment.
Q109. - (Topic 3)
You have a computer that runs Windows 7.
You have a system image backup of the computer.
You install a new application that is configured to run as a service.
You restart the computer and receive a STOP error message.
You need to successfully start Windows 7 in the minimum amount of time.
What should you do?
A. Start the computer from the Windows 7 installation media and select Startup Repair.
B. Start the computer and select Last Known Good Configuration from the advanced startup options.
C. Start the computer and select Safe Mode from the advanced startup options. Restore a restore point.
D. Start the computer and select Safe Mode from the advanced startup options. Restore the system image.
Answer: B
Explanation:
Last Known Good Configuration (Advanced) ) feature in Advanced Boot Options is a recovery option that you use to start your computer with the most recent settings that worked. Last Known Good Configuration (Advanced) restores registry information and driver settings that were in effect the last time the computer started successfully. You should use the Last Known Good Configuration (Advanced) feature when you cannot start Windows 7 after you make a change to your computer, or when you suspect that a change that you just made is causing a problem, for example, if you cannot start Windows after you install a new video driver. When you start your computer by using the Last Known Good Configuration (Advanced) feature, Windows 7 uses the configuration stored in the following registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSetXX (where by XX are numbers starting with 01 and rising in number to 02, 03, 04 and so on). This is the registry key that is used to store the configuration settings for the Drivers and Services on the system. Each time you boot the system, Windows will be assisted booting by using the registry key "HKEY_LOCAL_MACHINE\System\CurrentControlSet" which will point to another control set key, normally HKEY_LOCAL_MACHINE\System\CurrentControlSet01, (depending on how the system is configured) which contains the setting for the current boot process. Each time Windows boots there will also be a values created under the "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Select" key. These contain REG_DWORD data that enable the Control Keys to operate the way they are designed to. These values tell the CurrentControlSet key which numbered CurrentControlSet to point to enable Windows to boot successfully. The data that tells Last Good Known Configuration which numbered CurrentControlSet to load is also stored under these values. They also contain the data that tells Windows which CurrentContolSet not to use, as there is information stored that lets Windows know what CurrentControlSet has failed to load when Windows was unable to boot.
The Last Known Good Configuration CurrentControlSet will change each time the system configuration for the control set changes. This means that each time you install or uninstall a driver or service, a new numbered CurrentControlSet will be created and stored. If you alter the system, and it is then unable to boot, the Last Known Good Configuration will point to the CurrentControlSet that was last used in a successful boot.
This happens each time that Windows boots and there should typically be only four control sets, although it is not uncommon to have five or six of these Control Sets contained in the registry. Windows will keep track of how many Control Sets are stored and should clear old ones once a certain amount is reached.
If installing a new program or device should render the system unbootable, you may be able to use "Last Known Good Configuration" to restore the damaged Control Set registry key with an earlier key that enabled the system to boot. This will remove the registry key(s) that relates to the problem driver or service. It will not remove the actual driver or service but will render it unusable. This could result in any program or device the was installed after the last boot having to be re-installed as their configuration setting will have been over written. When you perform a system restore following a normal boot or following a boot that uses the Last Known Good Configuration (Advanced) option, a restore point is created that enables you to undo the changes if they do not fix your problem. However, if you perform a system restore when the computer is in Safe Mode or by using the System Recovery options, you cannot undo the restore operation. In this case, if your problem is not resolved, you can run another system restore and choose a different restore point.
Q110. - (Topic 3)
You have a computer that runs Windows 7. The computer has a single volume. You install 15 applications and customize the environment.
You complete the following actions:
Create an export by using Windows Easy Transfer
Create a system image by using Backup and Restore
Install the User State Migration Tool (USMT) and run Scanstate
The disk on the computer fails. You replace the disk.
You need to restore the environment to the previous state.
What should you do?
A. Install Windows 7, install USMT, and then run Loadstate.
B. Install Windows 7 and then import the Windows Easy Transfer package.
C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run Bcdboot.exe.
D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the system image.
Answer: D
Explanation:
Restoring from a System Image Backup
A System Image restore rewrites the entire contents of a system volume. Therefore, you restore from a System Image backup by booting from the Windows 7 Installation DVD-ROM and loading System Recovery tools or by pressing F8 during the boot process. Restoring from a System Image backup enables you to quickly get a computer running after you replace a failed hard disk, or if the operating system installation has been corrupted (for example, by malware that cannot be removed except 0 by wiping the disk). It is sometimes known as complete recovery or complete PC Restore. This procedure assumes that the System Recovery Options (otherwise known as the Windows Recovery Environment, or Windows RE) files are present on the DVD-ROM. If not, you can boot from the installation DVD-ROM and press F8 during the boot to access the Advanced Boot Options, as described in the next section of this lesson. To restore a System Image backup, perform the following steps:
1. Ensure the backup medium is connected to your computer.2. Insert the Windows 7 DVD-ROM. Ensure that the computer BIOS is configured to boot from the DVD-ROM.3. Restart your computer. When prompted to boot from DVD-ROM, press any key.4. Windows 7 Setup loads. When prompted, select your regional preferences and then click Next.5. Click Repair Your Computer.6. In the System Recovery Options dialog box, click Restore Your Computer Using System Image. If thebackup was saved to a DVD-ROM, insert the DVD-ROM now. Click Next. The Windows System Image Restore Wizard starts.7. On the Select A System Image Backup page, the most recent backup is automatically selected. If this is the backup you want to restore, click Next. Otherwise, click Select A System Image, click Next, and then select the desired backup.8. On the Choose Additional Restore Options page, select the Format And Repartition Disks check box if you want to reformat the disk and overwrite all data, or if the disk is not formatted. If you do not want to overwrite all the data on your current disk, do not select this check box. Click Next.9. Click Finish. When prompted, click Yes to confirm. Windows System Image Restore reads the data from the backup and overwrites existing files. You can restore to a different-sized hard disk, provided that the hard disk is large enough to store the backup. After the restore is complete, the computer restarts using the restored system volume.