70-680 Exam
Facts about exam 70 680
Simulation of mcts 70 680 exam guide materials and practice for Microsoft certification for IT learners, Real Success Guaranteed with Updated 70 680 practice test pdf dumps vce Materials. 100% PASS TS:Windows 7,Configuring exam Today!
Q81. - (Topic 5)
Your company network includes client computers that have Windows 7 installed. All client computers have NetBIOS disabled.
You need to view the status of all TCP/UDP ports.
Which command should you run?
A. nbtstat -n
B. ipconfig /all
C. netstat -an
D. ipconfig /displaydns
Answer: C
Q82. - (Topic 2)
You have a computer that runs Windows XP and a USB drive that is protected by using BitLocker To Go.
You need to ensure that you can copy files from the computer to the USB drive. The solution must retain the existing files on the USB drive.
What should you do?
A. From a computer that runs Windows 7, change the file system of the USB drive.
B. From a computer that runs Windows 7, disable BitLocker To Go for the USB drive.
C. Log on to Windows XP as member of the Administrators group.
D. Log on to Windows XP by using a user account that has an Encrypting File System (EFS) certificate.
Answer: B
Explanation:
BitLocker To Go does not require that the computer have a TPM chip or that Group Policy be configured to allow some other form of authentication such as a startup key. If you configure appropriate policies, devices protected by BitLocker To Go can be used in read-only mode with computers running Windows XP and Windows Vista.
Q83. - (Topic 1)
Which of the following must you download from Microsoft's Web site to obtain USMT 4.0?
A. Windows Anytime Upgrade
B. Windows Upgrade Advisor
C. WAIK
D. Microsoft Application Compatibility Toolkit
Answer: C
Explanation:
User State Migration Tool USMT 4.0 is a command-line utility that allows you to automate the process of user profile migration. The USMT is part of the Windows Automated Installation Kit (WAIK) and is a better tool for performing a large number of profile migrations than Windows Easy Transfer. The USMT can write data to a removable USB storage device or a network share but cannot perform a direct side-by-side migration over the network from the source to the destination computer. The USMT does not support user profile migration using the Windows Easy Transfer cable. USMT migration occurs in two phases, exporting profile data from the source computer using ScanState and importing profile data on the destination computer using LoadState.
Q84. - (Topic 4)
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BrachCache features installed.
All client computers have Windows Firewall along with Advanced Security enabled for all network profiles.
You need to ensure that client computers can access cached files stored on the file server.
What should you do?
A. Run the Netsh branchcache set service mode=HOSTEDSERVER client authentication=NONE command
B. Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702, and inbound and outbound trafficfor local TCP port 80.
C. Create a Group Policy that sets Hash Publication for BranchCache as disabled.
D. Run the netsh branchcache set service mode=DISTRIBUTED command.
E. Create a Group Policy object and configure the Set percentage of disk space used for client computer cache option.
F. Check permisions.
G. Run the netsh branchcache set service mode=HOSTEDCLIENT command.
H. Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.
I. Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound and outbound traffic for local TCP port 8443.
Answer: G
Q85. - (Topic 2)
You are installing a 64bit edition of Windows 7. During the installation, you receive an error message when you attempt to add mass storage driver. You need to complete the installation of Windows 7. You start the computer from the Windows 7 installation media. What should you do next?
A. From the Install Windows dialog box, click RESCAN.
B. From the Install Windows dialog box, click DRIVE OPTIONS (ADVANCED)
C. From the Advanced Boot options menu, select SAFE MODE.
D. From the Advanced Boot options menu, select DISABLE DRIVER SIGNATURE ENFORCEMENT.
Answer: B
Q86. - (Topic 3)
You have a custom image of Windows 7.
You discover that the boot configuration data store in the custom image is corrupted.
You need to create a new configuration data store within the custom image.
What should you do?
A. Run Imagex.exe and specify the /append parameter. Run Bcdedit.exe.
B. Run Imagex.exe and specify the /mountrw parameter. Run Bcdedit.exe.
C. From Windows System Image Manager (Windows SIM), select the image and then create a configuration set.
D. From Windows System Image Manager (Windows SIM), select the image and then create a catalog.
Answer: B
Explanation:
ImagexImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack./appendAppends a volume image to an existing Windows image (.wim) file. Creates a single instance of the file, comparing it against the resources that already exist in the .wim file, so you do not capture the same file twice/mountrwMounts a .wim file from Windows XP with Service Pack 2 (SP2), Windows Server 2003 with Service Pack 1 (SP1), or Windows Vista with read/write permission to a specified directory. Once the file is mounted, you can view and modify all the information contained in the directory.BcdeditBCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose as Bootcfg.exe on earlier versions of Windows, but with two major improvements: BCDEdit exposes a wider range of boot options than Bootcfg.exe, and BCDEdit has improved scripting support.NOT Windows SIMOpens Windows images, creates answer files, and manages distribution shares and configuration sets. NOTE: question specifies configuration data store, not configuration set.
Q87. HOTSPOT - (Topic 4)
You are performing an audit of the installed updates on a computer running Windows 7 Enterprise.
You need to find a list of the installed updates on the computer.
Which settings categories should you choose? (To answer, select the appropriate settings in the work area.)
Answer:
Q88. - (Topic 1)
You have a Virtual Hard Disk (VHD) and a computer that runs Windows 7. The VHD has Windows 7 installed.
You need to start the computer from the VHD.
What should you do?
A. From Diskpart.exe, run Select vdisk.
B. From Disk Management, modify the active partition.
C. Run Bootcfg.exe and specify the /default parameter.
D. Run Bcdedit.exe and modify the Windows Boot Manager settings.
Answer: D
Explanation:
When you have created a VHD and installed a system image on it, you can use the BCDEdit tool Bcdedit.exe to add a boot entry for the VHD file in your computer running Windows 7.
Q89. - (Topic 1)
You work in an international company which is named Wiikigo. Before entering this company, you have two years of experience in the IT field, as well as experience implementing and administering any Windows client operating system in a networked environment.
You are professional in installing, upgrading and migrating to Windows 7, deploying Windows 7, and configuring Hardware and Applications and son on.
You have a workgroup which contains five computers. Windows 7 is run by the computers. A computer named C01 has video and audio files.
You have to share C01s video and audio files on the network.
What should you do? (Choose more than one)
A. Connect a removable drive and enable BitLocker To Go.
B. A HomeGroup should be created.
C. The files should be moved to a Media Library.
D. All BranchCache rules should be enabled in Windows Firewall.
Answer: B,C
Q90. - (Topic 3)
You have two computers named Computer1 and Computer2 that run Windows 7.
You connect from Computer1 to Computer2 by using Remote Desktop.
You discover that you cannot copy any files between the computers during the Remote Desktop session.
You need to ensure that you can copy files between the computers during the Remote Desktop session.
What should you do?
A. On Computer1, open Windows Firewall and allow file and printer sharing.
B. On Computer2, open Windows Firewall and allow file and printer sharing.
C. On Computer1, open Remote Desktop Connection and configure the Local devices and resources setting.
D. On Computer2, open Remote Desktop Connection and configure the Local devices and resources setting.
Answer: C
Explanation:
How can I use my devices and resources in a Remote Desktop session? Redirecting a device on your computer makes it available for use in a Remote Desktop session. If you have a recent version of Remote Desktop, you can redirect most devices, including printers, smart cards, serial ports, drives, Plug and Play devices, media players based on the Media Transfer Protocol (MTP), and digital cameras based on the Picture Transfer Protocol (PTP). Some USB devices can be redirected, and you can also redirect your Clipboard.