getcertified4sure.com

The Secret of pdf for 70-680




Microsoft 70-680 exam braindumps covers the core requirements appearing in the 70-680 genuine test. Your own achievement ratio is going to be enhanced with the aid of 70-680 certification practice questions and answers, along with the confidence will be boosted accordingly. You will definitely find through the Microsoft Microsoft 70-680 exam. Otherwise, we present full refund or perhaps another no cost Microsoft 70-680 product to suit your needs. Dont find stressed about the 70-680 actual exam. As long as an individual prepare that by the Microsoft practice demos step through step, you are going to be certainly pass. Dont wait for too lengthy, change your current career as well as change your health.

2021 Oct applocker 70-680:

Q171. - (Topic 3) 

You need to modify the contents of an image that is contained in a Windows image (WIM) file. 

What should you do first? 

A. Run Diskpart /s. 

B. Run Peimg.exe /import. 

C. Create an empty folder on a NTFS partition. 

D. Create and attach a virtual hard disk (VHD). 

Answer: C 


Q172. - (Topic 5) 

Your company Research department includes client computers that have Windows 7 and Windows Vista installed on separate partitions in a dual-boot configuration. The computers boot into Windows 7 by default or users can choose to boot into Windows Vista during startup. 

The company management has decided that the Windows Vista partition must be deleted from all the computers. 

You need to ensure that the staff of the Research department are not prompted to select a boot option during startup and that Windows 7 is chosen automatically. 

What should you do? 

A. In Windows Vista, from an elevated command prompt, run bcdedit /delete {current}. 

B. Select the Selective startup option button by using msconfig.exe. 

C. In Windows Vista, from an elevated command prompt, run bcdedit /delete {default}. 

D. In Windows 7, from an elevated command prompt, run bcdedit /delete {default}. 

Answer: A 


Q173. - (Topic 2) 

You have a computer that runs Windows 7. The computer contains one hard disk. The hard disk is configured as shown in the following table. 


You install a new 250-GB hard disk in the computer. 

You need to ensure that all the files on the computer are available if a single disk fails. 

What should you do? 

A. Create a mount point on C and D and then create a striped volume. 

B. Create a mount point on C and D and then create two striped volumes. 

C. Convert both disks to dynamic disks and then create a mirrored volume. 

D. Convert both disks to dynamic disks and then create two mirrored volumes. 

Answer: D 

Explanation: 

Creating a Mirrored Volume (RAID-1)A mirrored or RAID-1 volume provides availability and fault tolerance but does not improve performance. It uses two disks (or two portions on separate disks) that are the same size. Any changes made to the first disk of a mirror set are also made to its mirror disk. If the first disk fails, the mirror is broken and the second disk is used until the first is repaired or replaced. The mirror is then re-created, and the information on the working disk is mirrored on the repaired disk. The disadvantage of RAID-1 is that you need (for example) two 200-GB disks to hold 200 GB of data. The advantage is that you can mirror a system disk containing your operating system.You create a mirrored volume using a very similar procedure to the one that creates a striped volume, except that you right-click the first disk of your mirror and click New Mirrored Volume to start the appropriate wizard. You then select the second disk. The second disk needs to have a portion of unallocated space that is at least as large as the disk you want to mirror. The drive letter for a mirrored volume is the same as the drive letter of the first disk. You can also use the Diskpart tool to create a mirrored volume. At the DISKPART> prompt you first use the select disk command to select the first disk. You then enter a command with the syntax add disk=<n>to specify the mirror disk. 


Q174. - (Topic 6) 

Your company network has a single-domain Active Directory forest. The forest functional level is set to Windows Server 2008 R2. All computers are members of the domain. 

You plan to deploy Windows BitLocker Drive Encryption (BitLocker) on portable computers that have Windows 7 Enterprise installed. 

You need to be able to automatically back up recovery passwords for BitLocker-protected disk volumes on the portable computers. 

What should you do before you start encrypting the disk volumes with BitLocker? 

A. Run the cscript Get-BitLockerRecoverylnfo.vbs script on the portable computers. 

B. Select the Turn on BitLocker backup to Active Directory option in local policy on the portable computers. 

C. Run the cscript List-ACEs.vbs script on the portable computers. 

D. Run the Idifde -i -v -f BitLockerTPMSchemaExtension.Idf -c script on a domain controller. 

Answer: B 


Q175. DRAG DROP - (Topic 5) 

Your company network includes a Windows Server 2008 R2 server named Server 1. You use a client computer named Client1 that has Windows 7 Enterprise installed. Both computers are members of an Active Directory domain. 

You want to automatically collect events from Client1 to Server1. Bandwidth delivery optimization will not be used along with the subscription. 

You need to configure the required collector-initiated subscription. 

What should you do? (To answer, drag the appropriate configuration step or configuration steps to the correct target computer or target computers in the answer area. An answer choice can be used once, more than once, or not at all.) 


Answer: 



70-680 study guide

Improve testking for 70-680:

Q176. - (Topic 4) 

A company has client computers that run Windows 7 Enterprise. 

Users complain that Windows displays too many notifications when they try to install software or make changes to their computer. 

You need to decrease the number of notifications that Windows displays when users try to install software or make changes to their computer. 

Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.) 

A. Local Users and Groups 

B. the Services management console 

C. the netsh command 

D. the Group Policy management console 

E. share permissions 

F. the folder Properties window 

G. Device Manager 

H. the icacls command 

I. the User Account Control Settings Control Panel window 

Answer: D,I 


Q177. - (Topic 4) 

You have a portable computer that runs Windows 7. Windows Backup is configured to run every day at 15:00. 

You need to prevent backups from automatically running when the computer is running on the battery. 

What should you do? 

A. From Backup and Restore, click Change settings. 

B. From Task Scheduler, modify the Automatic Backup task. 

C. From Power Options, modify the settings of the current power plan. 

D. From the local computer policy, modify the power management settings. 

Answer: B 

Explanation: To set power management options for a scheduled task 

-Open Task Scheduler. 

-Right-click the task for which you want to set power management options, and then click Properties. 

-On the Settings tab, under Power Management, do one or more of the following: 

-To conserve the battery power of your computer, select the Don't start the task if the computer is running on batteries check box. 

-To stop the task if the computer starts running on battery power, select the Stop the task if battery mode begins check box. 

-To wake your computer from hibernation or standby to run a task, select the Wake the computer to run this task check box. 

Task Scheduler 

With Scheduled Tasks, you can schedule any script, program, or document to run at a time that is most convenient for you. Scheduled Tasks starts every time that you start Windows and runs in the background, and it starts each task that you schedule at the time that you specify when you create the task. 


Q178. - (Topic 2) 

You have a computer that runs Windows XP and a USB drive that is protected by using BitLocker To Go. 

You need to ensure that you can copy files from the computer to the USB drive. The solution must retain the existing files on the USB drive. 

What should you do? 

A. From a computer that runs Windows 7, change the file system of the USB drive. 

B. From a computer that runs Windows 7, disable BitLocker To Go for the USB drive. 

C. Log on to Windows XP as member of the Administrators group. 

D. Log on to Windows XP by using a user account that has an Encrypting File System (EFS) certificate. 

Answer: B 

Explanation: 

BitLocker To Go does not require that the computer have a TPM chip or that Group Policy be configured to allow some other form of authentication such as a startup key. If you configure appropriate policies, devices protected by BitLocker To Go can be used in read-only mode with computers running Windows XP and Windows Vista. 


Q179. - (Topic 3) 

You have two computers named Computer1 and Computer2 that run Windows 7. Computer1 has two local user accounts named User1 and User2. On Computer1, you run Scanstate.exe /all \\server1\data\computer1. On Computer2, you run Loadstate.exe /lac:Pa$$w0rd \\server1\data\computer1. 

You need to ensure that User1 and User2 can log on to Computer2. 

What should you do on Computer2? 

A. Enable all user accounts 

B. Modify the default password policy 

C. Modify the Allow log on locally user right 

D. Add User1 and User2 to the local Administrators group 

Answer: A 

Explanation: 

LoadState is run on the destination computer. You should install all applications that were on the source computer on the destination before you run LoadState. You must run Loadstate. exe on computers running Windows Vista and Windows 7 from an administrative command prompt. To load profile data from an encrypted store named Mystore that is stored on a share named Migration on a file server named Fileserver and which is encrypted with the encryption key Mykey, use this command: loadstate \\fileserver\migration\mystore /i:migapp.xml /i:miguser.xml /decrypt /key:"mykey" 

(local account create) /lac:[Password] Specifies that if a user account is a local (non-domain) account, and it does not exist on the destination computer, USMT will create the account on the destination computer but it will be disabled. To enable the account, you must also use the /lae option. If the /lac option is not specified, any local user accounts that do not already exist on the destination computer will not be migrated. Password is the password for the newly created account. An empty password is used by default. 


Q180. - (Topic 3) 

You need to provide an administrator the ability to view and interact with your current logon session. 

What should you do? 

A. At the command prompt, run Psr.exe. 

B. At the command prompt, run Winrm.exe quickconfig. 

C. From the Start menu, open Remote Desktop Connection. 

D. From the Start menu, open Windows Remote Assistance. 

Answer: D 

Explanation: 

Remote Assistance Both Remote Assistance and Remote Desktop allow the user at the management computer to see the desktop and applications that are present on the remote computer. The difference between Windows Remote Assistance and Remote Desktop is that a user is logged on to the remote computer and initiates the remote assistance session, whereas a Remote Desktop session is initiated on the management computer. Remote Assistance is a support tool used by help-desk staff to allow them to view the screen of the person to whom they are providing assistance. Remote Assistance reduces the need for nontechnical users to accurately describe the problem that they are having with their computers because support personnel can see the desktop directly. Unlike the version of Remote Assistance that shipped with Windows XP, the version of Remote Assistance that is included with Windows 7 does not include a voice client. If you are going to talk to the person whom you are helping using Remote Assistance, you are going to have to use another method, such as the telephone.