70-680 Exam
The Secret of certification mcts 70-680
What will certainly you get together with your obtain of the Microsoft 70-680 items are because follows: 1. A new study guide for Microsoft Microsoft check engine along with Pdf. 2. A new preview of Microsoft 70-680 genuine exam questions. 3. A good overview of Microsoft 70-680 online training training course. 4. Correct answers to the 70-680 practice questions. Throw aside the thick Microsoft 70-680 books and act currently and download your Microsoft Microsoft 70-680 today! Using our constrained but important Microsoft Microsoft certification exam questions and answers to adopt the 70-680 true exam, you will have a high level which assures your success.
2021 Oct pass mark for 70-680:
Q131. - (Topic 3)
You have a computer that runs Windows 7.
A user installs a third-party media player on the computer.
You discover that all media files automatically open by using the third-party media player.
You need to ensure that all media files open automatically by using Windows Media Player.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Select a media file. Right-click the file and select open with.
B. Select a media file. Right-click the file and select Restore previous versions.
C. From Control Panel, modify the Set your default programs settings.
D. From Control Panel, modify the Set program access and computer defaults settings.
Answer: C
Q132. - (Topic 3)
You need to ensure that when you insert a blank DVD into the DVD drive, Windows Explorer opens automatically and enables you to select files to burn to DVD.
What should you do?
A. From Default Programs, modify the AutoPlay settings.
B. From Default Programs, modify the default program settings.
C. From Device Manager, modify the properties of the DVD drive.
D. From System Configuration Utility, modify the Startup settings.
Answer: A
Q133. - (Topic 3)
You have a computer that runs Windows 7.
You have a system image backup of the computer.
You install a new application that is configured to run as a service.
You restart the computer and receive a STOP error message.
You need to successfully start Windows 7 in the minimum amount of time.
What should you do?
A. Start the computer from the Windows 7 installation media and select Startup Repair.
B. Start the computer and select Last Known Good Configuration from the advanced startup options.
C. Start the computer and select Safe Mode from the advanced startup options. Restore a restore point.
D. Start the computer and select Safe Mode from the advanced startup options. Restore the system image.
Answer: B
Explanation:
Last Known Good Configuration (Advanced) ) feature in Advanced Boot Options is a recovery option that you use to start your computer with the most recent settings that worked. Last Known Good Configuration (Advanced) restores registry information and driver settings that were in effect the last time the computer started successfully. You should use the Last Known Good Configuration (Advanced) feature when you cannot start Windows 7 after you make a change to your computer, or when you suspect that a change that you just made is causing a problem, for example, if you cannot start Windows after you install a new video driver. When you start your computer by using the Last Known Good Configuration (Advanced) feature, Windows 7 uses the configuration stored in the following registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSetXX (where by XX are numbers starting with 01 and rising in number to 02, 03, 04 and so on). This is the registry key that is used to store the configuration settings for the Drivers and Services on the system. Each time you boot the system, Windows will be assisted booting by using the registry key "HKEY_LOCAL_MACHINE\System\CurrentControlSet" which will point to another control set key, normally HKEY_LOCAL_MACHINE\System\CurrentControlSet01, (depending on how the system is configured) which contains the setting for the current boot process. Each time Windows boots there will also be a values created under the "HKEY_LOCAL_MACHINE\System\CurrentControlSet\Select" key. These contain REG_DWORD data that enable the Control Keys to operate the way they are designed to. These values tell the CurrentControlSet key which numbered CurrentControlSet to point to enable Windows to boot successfully. The data that tells Last Good Known Configuration which numbered CurrentControlSet to load is also stored under these values. They also contain the data that tells Windows which CurrentContolSet not to use, as there is information stored that lets Windows know what CurrentControlSet has failed to load when Windows was unable to boot.
The Last Known Good Configuration CurrentControlSet will change each time the system configuration for the control set changes. This means that each time you install or uninstall a driver or service, a new numbered CurrentControlSet will be created and stored. If you alter the system, and it is then unable to boot, the Last Known Good Configuration will point to the CurrentControlSet that was last used in a successful boot.
This happens each time that Windows boots and there should typically be only four control sets, although it is not uncommon to have five or six of these Control Sets contained in the registry. Windows will keep track of how many Control Sets are stored and should clear old ones once a certain amount is reached.
If installing a new program or device should render the system unbootable, you may be able to use "Last Known Good Configuration" to restore the damaged Control Set registry key with an earlier key that enabled the system to boot. This will remove the registry key(s) that relates to the problem driver or service. It will not remove the actual driver or service but will render it unusable. This could result in any program or device the was installed after the last boot having to be re-installed as their configuration setting will have been over written. When you perform a system restore following a normal boot or following a boot that uses the Last Known Good Configuration (Advanced) option, a restore point is created that enables you to undo the changes if they do not fix your problem. However, if you perform a system restore when the computer is in Safe Mode or by using the System Recovery options, you cannot undo the restore operation. In this case, if your problem is not resolved, you can run another system restore and choose a different restore point.
Q134. - (Topic 6)
Your laptop has a 400 GB drive and currently reserves, by default, 2% (8 GB) for shadow copies.
You need to reserve more space for previous versions of files.
What should you do?
A. From System Properties, System Protection, expand the Max usage to 20 GB.
B. From System Properties, System Protection, turn off system protection.
C. From Disk Properties, change the Quota Settings from 8 GB to 20 GB.
D. From System Properties, System Protection, set it to only restore previous versions of files.
Answer: A
Explanation: Control Panel->System and Security. >System [Properties]->System Protection->Configure
Q135. - (Topic 1)
You have a computer named Computer1 that runs Windows 7. The computer is a member of an Active Directory domain. The network contains a file server named Server1 that runs Windows Server 2008.
You log on to the computer by using an account named User1.
You need to ensure that when you connect to Server1, you authenticate by using an account named Admin1.
What should you do on Computer1?
A. From User Accounts, select Link online IDs.
B. From Windows CardSpace, select Add a card.
C. From Credential Manager, select Add a Windows credential.
D. From Local Security Policy, modify the Access this computer from the network user right.
Answer: C
Explanation:
Credential Manager Credential Manager stores logon user name and passwords for network resources, including file servers, Web sites, and terminal services servers. Credential Manager stores user name and password data in the Windows Vault. You can back up the Windows Vault and restore it on other computers running Windows 7 as a method of transferring saved credentials from one computer to another. Although Credential Manager can be used to back up some forms of digital certificates, it cannot be used to back up and restore the self-signed Encrypting File System (EFS) certificates that Windows 7 generates automatically when you encrypt a file. For this reason, you must back up EFS certificates using other tools. You will learn about backing up EFS certificates later in this lesson.
Down to date windows certification 70-680:
Q136. - (Topic 4)
A Remote Assistance session is established with a user's computer that runs Windows 7 Enterprise.
You need to verify that a local file is encrypted with the Encrypting File System (EFS).
What should you do to accomplish this goal?
A. the netsh command
B. the folder Properties window
C. Device Manager
D. share permissions
E. the Services management console
F. the Group Policy management console
G. the icacls command
H. the User Account Control Settings Control Panel window
I. Local Users and Groups
Answer: B
Explanation: Right-click the file or folder Select Properties Click the Advanced button under the Attributes section If Check the box next to "Encrypt contents to secure data" is checked, then the file is encrypted using EFS.
Q137. HOTSPOT - (Topic 4)
You administer a computer that has Windows 7 Enterprise installed.
The computer has an application that must run by using administrative permission.
A user who has a standard user account connects to the computer by using a Remote Desktop connection. The user right-clicks the application shortcut, but the run as administrator option is unavailable.
You need to ensure that the user is able to run the application by using administrative permissions.
Which services should you configure? (To answer, select the appropriate option or options in the answer area).
Answer:
Q138. - (Topic 1)
A user wants to install the games included with Windows 7 on his PC. They were not installed by default.
Windows components can be added or removed using which of the following in Windows 7.
A. Click the Start Bar, Control Panel, Add/Remove Programs, and click Windows Components.
B. Click the Start Bar, Control Panel, Programs, then click Turn Windows features on or off.
C. Click the Start Bar, Settings, Windows Control Center.
D. Right click the "My Computer" icon, Choose Properties, Choose Computer Management, on the left pane choose Add Remove Windows Components.
Answer: B
Q139. - (Topic 1)
You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive is connected to a RAID controller.
During the installation, you discover that the Windows 7 installation media does not include the files required to install the RAID controller.
You need ensure that you can install Windows 7 on the hard disk drive.
What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).
Answer: C
Explanation:
If your computer has special disk drive hardware, such as a redundant array of independent disks (RAID) array, it may be necessary to use the Load Driver option. It is necessary to use this option only if the disk that you want to install Windows on is not shown as a possible install location. If your disk is shown as an available option, Windows 7 has already loaded the appropriate drivers. Once you select the location where you want to install Windows 7, the Windows 7 installation process begins.
Q140. - (Topic 6)
Your company has Windows 7 Enterprise computers that do not have a Trusted Platform Module (TPM) installed.
You need to enable BitLocker drive encryption on the operating system drives.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a USB startup key.
B. Configure the Require additional authentication at startup group policy setting.
C. Create a network key location.
D. Configure the Allow enhanced PINs for startup group policy setting.
Answer: A,D
Explanation: Ref: http://technet.microsoft.com/en-us/library/ee424319(v=WS.10).aspx