70-741 Exam
Top Microsoft 70-741 bible Choices
We provide real 70-741 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Microsoft 70-741 Exam quickly & easily. The 70-741 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Microsoft 70-741 dumps pdf and vce product and material, you can easily pass the 70-741 exam.
Q21. Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment.
Server1 has an IPv4 scope named Scope1.
You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1.
What should you do?
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.
Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/cc770650(v=ws.11).aspx
Q22. Your network contains multiple wireless access points (WAPs) that use WPA2-Personal authentication. The network contains an enterprise root certification authority (CA).
The security administrator at your company plans to implement WPA2-Enterprise
authentication on the WAPs.
To support the authentication change, you deploy a server that has Network Policy Server (NPS) installed.
You need to configure NPS to authenticate the wireless clients. What should you do on the NPS server?
A. Add RADIUS clients and configure network policies.
B. Create a remote RADIUS server group and configure connection request policies.
C. Create a remote RADIUS server group and install a server certificate.
D. Add RADIUS clients and configure connection request policies.
Answer: A
Explanation:
https://ittrainingday.com/2013/12/25/how-to-configure-a-windows-radius-server-for-802-1x- wireless-or-wired-connections/
Q23. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server
2021.
Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.
A domain user named User1 is a member of the groups shown in the following table.
On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx
Q24. Your company has 5,000 users who work remotely.
You have 40 VPN servers that host the remote connections for the users. You plan to deploy a RADIUS solution that contains five RADIUS servers.
You need to ensure that client authentication requests are distributed evenly between the five RADIUS servers.
What should you do?
A. Install the Network Load Balancing role service on all of the RADIUS server. Configure all of the RADIUS clients to connect to a virtual IP address.
B. Deploy RAS Gateway to a new server. Configure all of the RADIUS clients to connect to RAS Gateway.
C. Install the Failover Clustering role service on all of the RADIUS servers. Configure all of the RADIUS clients to connect to the IP address of the cluster.
D. Deploy a RADIUS proxy to a new server. Configure all of the RADIUS clients to connect to the RADIUS proxy.
Answer: D
Explanation:
https://technet.microsoft.com/en-us/library/dd197433(v=ws.10).aspx
Q25. Your company has two main offices. The offices are located in London and Seattle. All servers run Windows Server 2021.
In the Seattle office, you have a Distributed File System (DFS) server named FS1. FS1 has a folder named Folder1 that contains large Windows image files.
In the London office, you deploy a DFS server named FS2, and you then replicate Folder1 to FS2.
After several days, you discover that the replication of certain files failed to complete. You need to ensure that all of the files in Folder1 can replicate to FS2.
What should you do?
A. Modify the disk quota of the drive that contains Folder1.
B. From a command prompt, run dfsutil /purgemupcache.
C. Create a quota for Folder1 by using File Server Resource Manager (FSRM).
D. Modify the size of staging area of Folder1.
Answer: C
Explanation:
https://technet.microsoft.com/en-us/library/hh831487(v=ws.11).aspx
Q26. Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
What should you do to enable Server2 as a NAT server?
A. From Routing and Remote Access, add an interface.
B. From Windows PowerShell, run the New-RoutingGroupConnector cmdlet.
C. From Routing and Remote Access, add a routing protocol.
D. From Windows PowerShell, run the Install-WindowsFeature cmdlet.
Answer: A
Explanation:
https://technet.microsoft.com/en-us/library/dd469812(v=ws.11).aspx
Q27. Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
You need to create a zone to ensure that Server1 can resolve single-label names. What should you name the zone on Server1?
A. . (root)
B. WINS
C. NetBIOS
D. GlobalNames
Answer: D
Explanation:
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx