NEW QUESTION 1

From Voice in the Microsoft Teams admin center, you select Operators and add an operator. You need to enable users for Microsoft Teams Phone.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 2

Your company has a Teams Phone deployment.
The network team at the company completes a local internet breakout for Teams traffic.
To validate the configuration, you review the Call Debug log shown in the following exhibit.

Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 3

Your company has a main office in New York and a branch office in Calgary. All offices connect to each other by using a dedicated WAN.
You have a Microsoft Teams Phone deployment.
You need to recommend a Direct Routing solution that meets the following requirements:
• If a Session Border Controller (SBQ fails in the New York office, PSTN services must remain available through a local PSTN egress in New York. The Calgary office must prioritize a local PSTN egress and ensure that PSTN services remain available in the event of a local SBC outage.
• The number of SBCs must be minimized.
What should you recommend for each office? To answer, drag the appropriate components to the correct offices. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4

You have a Microsoft Teams Phone deployment that contains two users named User1 and User2. User1 will be on leave for two weeks.
You need to redirect all calls to the phone number of User1 to the phone number of User2. The solution must minimize administrative effort.
What should you modify for User1?

• A. the voicemail transfer target settings
• B. the call delay and order settings
• C. the call delegation settings
• D. the phone number type

Answer: C

Explanation:
Use the Teams admin center
You can use the Teams admin center to configure call forward and unanswered settings, group call pickup, and call delegation for your users.
To configure immediate call forward settings:
In the Teams admin center, go to Users > Manage users and select a user.
On the user details page, go to the Voice tab.
Under Call answering rules, select Be immediately forwarded, and select the appropriate call forward type and destination.
To configure simultaneous ringing, on the same page select Ring the user's devices. In the Also allow drop-down, select the appropriate simultaneous ringing setting.
To configure unanswered settings, on the same page select the appropriate setting in the If unanswered
drop-down. In the Ring for this many seconds before redirecting drop-down, specify the number of seconds to wait.
The configuration of call delegation and group call pickup are integrated into the call forward and unanswered settings by selecting the appropriate type. For example, to configure that calls should also ring the user's delegates, on the same page select Call delegation under Also allow. Then add the appropriate delegates by selecting Add people and clicking Save.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/user-call-settings

NEW QUESTION 5

You have a Microsoft Teams Phone deployment in an office.
When a user dials an emergency number, the safety team for the office is notified. Your company opens a new office that has a Teams Phone deployment
You need to ensure that the safety team for the new office is notified when an emergency call is placed from that office.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 6

Once Direct Routing is deployed, you need to prepare the environment to support a reams SBA in the Vancouver facility. The solution must meet the technical requirements.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Register an application in Azure Active Directory (Azure AD).
• B. Run the New-CsTeMsSurvivablcBranchAppliancc Cmdlet.
• C. Enroll the SBA server in Microsoft Intune.
• D. Configure the S8C for media bypass.
• E. Configure the SBC for call forking.
• F. Enable ForwardPAI on the online voice gateway.

Answer: ABD

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-survivable-branch-appliance

NEW QUESTION 7

Your company hires a new employee in Lisbon.
You assign a Microsoft 365 E3 license to the employee.
The employee must schedule meetings that will include customers in Lisbon. The customers will dial in to the meetings by using PSTN.
You need to ensure that the employee can send meeting invitations that include a dial-in conferencing bridge. The bridge must be set to a local number in Lisbon instead of the company's default dial-in conferencing bridge number.
Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. From Users in the Microsoft Teams admin center, edit the Audio conferencing settings of the employee.
• B. From the Microsoft Teams admin center, modify the settings of the default conferencing bridge.
• C. From the Microsoft 365 admin center, assign an Auto Conferencing add-on license to the employee.
• D. From the Microsoft 365 admin center, set the usage location of the employee to Portugal.

Answer: BC

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/audio-conferencing-in-office-365 https://docs.microsoft.com/en-us/microsoftteams/change-the-phone-numbers-on-your-audio-conferencing-bridg

NEW QUESTION 8

You need to provision a Microsoft Teams-certified common area phone device at a field site. The solution must ensure that a standard user can complete the physical handset tasks without sharing credentials.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 9

You have a Microsoft Teams Phone deployment. You deploy a new network site.
You discover that the new site is not listed in location-based reports. Other sites appear in the reports. You need to ensure that all the sites appear in the reports.
What should you do?

• A. From Network planner in the Microsoft Teams admin center, modify an existing network plan.
• B. From Network planner in the Microsoft Teams admin center, add a new persona.
• C. From the Microsoft Call Quality Dashboard, select Tenant Data Upload and upload a CSV file that contains the new network site only.
• D. From the Microsoft Call Quality Dashboard, select Tenant Data Upload and upload a CSV file that contains all the network sites.
• E. From Network planner in the Microsoft Teams admin center, add a new network plan.

Answer: D

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/cqd-upload-tenant-building-data

NEW QUESTION 10

You have a Microsoft Teams Phone deployment.
You need to provide two users with the ability to share a single phone number for inbound and outbound calling.
What are two ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

• A. call queues
• B. call forwarding
• C. group call pickup
• D. call delegation
• E. call park

Answer: AC

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-a-phone-system-call-queue
https://docs.microsoft.com/en-us/microsoftteams/call-sharing-and-group-call-pickup

NEW QUESTION 11

You have a Microsoft Teams Phone deployment. You are deploying Direct Routing.
All users have a SIP URI in the format of user@contoso.com. The Session Border Controller (SBC) is named sbc.voice.contoso.com.
When troubleshooting errors on the SBC, you receive the warning shown in the following exhibit.

What is a possible cause of the issue?

• A. The firewall blocks outbound traffic on port 443 to Microsoft Teams.
• B. The firewall blocks traffic to the signaling port on the SBC.
• C. TLS 1.2 is enabled on the SBC.
• D. Microsoft 365 Phone System licenses are not assigned to the users.

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certif

NEW QUESTION 12

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams. When the users are at a specific corporate site, you need to prevent the users from adding video during calls. Solution: You run New-CsTeamsMeetingPolicy and set the -IPVideoMode parameter to DISABLED.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Instead run New-CsTeamsNetworkRoamingPolicy and set the -AllowIPVideo parameter to $False.
Note: The New-CsTeamsNetworkRoamingPolicy cmdlet allows IT Admins to create policies for Network Roaming and Bandwidth Control experiences in Microsoft Teams.
The TeamsNetworkRoamingPolicy cmdlets enable administrators to provide specific settings from the TeamsMeetingPolicy to be rendered dynamically based upon the location of the Teams client. The TeamsNetworkRoamingPolicy cannot be granted to a user but instead can be assigned to a network site. The settings from the TeamsMeetingPolicy included are AllowIPVideo and MediaBitRateKb. When a Teams client is connected to a network site where a CsTeamRoamingPolicy is assigned, these two settings from the TeamsRoamingPolicy will be used instead of the settings from the TeamsMeetingPolicy.
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csteamsnetworkroamingpolicy

NEW QUESTION 13

Exhibit

You are deploying Microsoft Teams Calling Plans.
You port all phone numbers to Microsoft Teams Phone as shown in the exhibit (Click the Exhibit tab.) You need to assign. The number -1-234-555-5334 to an auto attendant.
What should you do first?

• A. Get an auto attendant toll number.
• B. Assign the number to the resource account of the auto attendant.
• C. Open a Microsoft support case to initiate an inventory type change.
• D. Create a port order for a user number.

Answer: D

NEW QUESTION 14

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company uses configuration profiles to manage Microsoft Teams-certified IP phones. The Standard configuration profile is applied to the IP phones.
The help desk receives reports that several user phones fail to lock automatically after the timeout period. You need to verify whether the configuration profile is applied to the problematic phones.
Solution: From Devices in the Microsoft Teams admin center, you select Phones, find the reported phones, and review the Configuration profile column.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 15

Your company has offices throughout the United States.
The company is opening a new office in Scranton. The office will occupy two floors in the same building. You need to ensure that if an emergency call is placed, the local emergency dispatchers know from which
floor the call came.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company uses Microsoft Teams Calling Plans.
The company acquires a small development team. Currently, users on the team have their own direct inward dial (DID) numbers that have PSTN capabilities.
You migrate the users to Teams.
You need to ensure that the users have phone numbers. Solution: You run the New-CsHybridTelephoneNumber cmdlet. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 17

Your company has an office in Seattle.
The default dial-in number for the company's Microsoft Teams meetings has an area code of 425.
The company does NOT have an office in New York. However, most of the company's customers are in New York.
You need to get a new default dial- In number that has a local 718 area code. You will NOT define additional location information in Teams.
Which two actions should you perform before you assign the bridge? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Get a Dedicated conference bridge (Toll) number.
• B. Search for new numbers by using a 718 area code.
• C. Get an auto attendant toll-free number.
• D. Get a Dedicated conference bridge (Toll Free) number.
• E. Search for new numbers by using New York.

Answer: AD

NEW QUESTION 18

Exhibit

Your company has a Microsoft Teams Phone deployment that uses Direct Routing.
A user named User1 reports that she cannot make calls because the dial pad n missing in Teams.
You run the Get-CsOnlineUser cmdlet and receive the output shown in the exhibit (Click the Exhibit tab.) Which three actions should you perform to ensure that the dial pad appears in the Teams client? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Assign a Microsoft Teams Phone Standard license to User1.
• B. Run theGrant-CsOnlineVoiceRogtinfPolicy cmdlet
• C. Run the set-csPhoneNumberAssignment cmdlet and specify the -PhonNumber parameter.
• D. Run the set-CsUsre cmdlet and specify the -LineURI parameter.
• E. Run the set-csuser cmdlet and set the -enterprisevoiceenabled parameter to $True.

Answer: ABE

NEW QUESTION 19

Your company has a Microsoft Teams Phone deployment.
You plan to deploy auto attendants and call queues.
The support desk requires that its auto attendant be able to forward calls after hours to local mobile phone numbers.
You need to identify which licenses to assign to auto-attendant. The solution must minimize costs. Which two licenses should you identify? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Microsoft 365 Phone System
• B. Microsoft 365 Domestic Calling Plan
• C. Microsoft 365 Phone System - Virtual User
• D. Office 365 E3
• E. Microsoft 365 E5
• F. Microsoft 365 Domestic and International Calling Plan

Answer: BC

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/plan-auto-attendant-call-queue

NEW QUESTION 20
......