getcertified4sure.com

nse4 dumps [Dec 2021]




Actualtests nse4 exam Questions are updated and all fortinet nse4 exam dumps answers are verified by experts. Once you have completely prepared with our fortinet nse4 exam exam prep kits you will be ready for the real fortinet nse4 exam exam without a problem. We have Avant-garde Fortinet nse4 exam dumps study guide. PASSED nse4 dumps First attempt! Here What I Did.

Q21. - (Topic 19) 

For data leak prevention, which statement describes the difference between the block and 

quarantine actions? 

A. A block action prevents the transaction. A quarantine action blocks all future transactions, regardless of the protocol. 

B. A block action prevents the transaction. A quarantine action archives the data. 

C. A block action has a finite duration. A quarantine action must be removed by an administrator. 

D. A block action is used for known users. A quarantine action is used for unknown users. 

Answer:


Q22. - (Topic 8) 

Which two methods are supported by the web proxy auto-discovery protocol (WPAD) to automatically learn the URL where a PAC file is located? (Choose two.) 

A. DHCP 

B. BOOTP 

C. DNS 

D. IPv6 autoconfiguration 

Answer: A,C 


Q23. - (Topic 1) 

Which network protocols are supported for administrative access to a FortiGate unit? (Choose three.) 

A. SNMP 

B. WINS 

C. HTTP 

D. Telnet 

E. SSH 

Answer: C,D,E 


Q24. - (Topic 7) 

Which statements regarding banned words are correct? (Choose two.) 

A. Content is automatically blocked if a single instance of a banned word appears. 

B. The FortiGate updates banned words on a periodic basis. 

C. The FortiGate can scan web pages and email messages for instances of banned words. 

D. Banned words can be expressed as simple text, wildcards and regular expressions. 

Answer: C,D 


Q25. - (Topic 20) 

In which process states is it impossible to interrupt/kill a process? (Choose two.) 

A. S – Sleep 

B. R – Running 

C. D – Uninterruptable Sleep 

D. Z – Zombie 

Answer: C,D 


Q26. - (Topic 13) 

Which statements are correct for port pairing and forwarding domains? (Choose two.) 

A. They both create separate broadcast domains. 

B. Port Pairing works only for physical interfaces. 

C. Forwarding Domain only applies to virtual interfaces. 

D. They may contain physical and/or virtual interfaces. 

Answer: A,D 


Q27. - (Topic 15) 

Which statements are correct properties of a partial mesh VPN deployment. (Choose two.) 

A. VPN tunnels interconnect between every single location. 

B. VPN tunnels are not configured between every single location. 

C. Some locations are reached via a hub location. 

D. There are no hub locations in a partial mesh. 

Answer: B,C 


Q28. - (Topic 11) 

Examine the two static routes to the same destination subnet 172.20.168.0/24 as shown below; then answer the question following it. config router static edit 1 set dst 172.20.168.0 255.255.255.0 set distance 20 set priority 10 set device port1 next edit 2 set dst 172.20.168.0 255.255.255.0 set distance 20 set priority 20 set device port2 

next 

end 

Which of the following statements correctly describes the static routing configuration provided above? 

A. The FortiGate evenly shares the traffic to 172.20.168.0/24 through both routes. 

B. The FortiGate shares the traffic to 172.20.168.0/24 through both routes, but the port2 route will carry approximately twice as much of the traffic. 

C. The FortiGate sends all the traffic to 172.20.168.0/24 through port1. 

D. Only the route that is using port1 will show up in the routing table. 

Answer:


Q29. - (Topic 11) 

Examine the exhibit; then answer the question below. 

The Vancouver FortiGate initially had the following information in its routing table: S 172.20.0.0/16 [10/0] via 172.21.1.2, port2 

C 172.21.0.0/16 is directly connected, port2 C 172.11.11.0/24 is directly connected, port1 Afterwards, the following static route was added: config router static edit 6 set dst 172.20.1.0 255.255.255.0 set pririoty 0 set device port1 set gateway 172.11.12.1 next end Since this change, the new static route is NOT showing up in the routing table. Given the 

information provided, which of the following describes the cause of this problem? 

A. The subnet 172.20.1.0/24 is overlapped with the subnet of one static route that is already in the routing table (172.20.0.0/16), so, we need to enable allow-subnet-overlap first. 

B. The 'gateway' IP address is NOT in the same subnet as the IP address of port1. 

C. The priority is 0, which means that the route will remain inactive. 

D. The static route configuration is missing the distance setting. 

Answer:


Q30. - (Topic 14) 

An administrator has formed a high availability cluster involving two FortiGate units. 

[ Multiple upstream Layer 2 switches] -- [ FortiGate HA Cluster ] -- [ Multiple downstream Layer 2 switches ] 

The administrator wishes to ensure that a single link failure will have minimal impact upon the overall throughput of traffic through this cluster. 

Which of the following options describes the best step the administrator can take? 

The administrator should _____________________. 

A. Increase the number of FortiGate units in the cluster and configure HA in active-active mode. 

B. Enable monitoring of all active interfaces. 

C. Set up a full-mesh design which uses redundant interfaces. 

D. Configure the HA ping server feature to allow for HA failover in the event that a path is disrupted. 

Answer: