NEW QUESTION 1

An engineer is using a cascading feature with Cisco TelePresence Conductor and Cisco TelePresence Servers. Which two limitations will the engineer likely encounter? (Choose two.)

• A. Ad-hoc conferencing cascading is not supported.
• B. Only single-screen endpoints are supported through cascading links.
• C. Multiple-screen endpoints are supported only with three or more Cisco TelePresence Servers.
• D. Scheduled conferencing is not supported.
• E. Ad-hoc conferencing cascading is supported only with three or more Cisco TelePresence Servers.

Answer: AD

NEW QUESTION 2

Which component provides flexible options for storing video and audio using a combination of network-attached storage, direct-attached storage, and SAN storage deployments?

• A. Cisco Video Surveillance Media Server
• B. Cisco Video Surveillance Virtual Matrix Software
• C. Cisco Video Surveillance Storage System
• D. Cisco Video Surveillance Transcoding and Encoding Server
• E. Cisco ISR Video Management and Storage Module

Answer: C

NEW QUESTION 3

Which video-bridging solution supports single-screen units and multiscreen systems and keeps multiscreen units grouped together logically during a call?

• A. Cisco MCU
• B. Cisco PVDM
• C. Cisco TelePresence Server
• D. Cisco TMS
• E. Cisco TCS

Answer: C

NEW QUESTION 4

Management wants to modify Cisco TMS to allow users to configure the call behavior with their associated devices and dial from a single ID. Which feature needs to be enabled and configured?

• A. Smart Scheduler
• B. Low-touch Provisioning
• C. FindMe
• D. CMR Provisioning

Answer: C

NEW QUESTION 5

In order to perform a password recovery for the admin user on a Cisco VCS appliance, what must an engineer do?

• A. Connect via Telnet to the Cisco VCS.
• B. Connect to the serial port.
• C. Connect via SSH.
• D. Connect to LAN port 1.

Answer: B

NEW QUESTION 6

Which option is an immersive endpoint?

• A. Cisco TelePresence EX90
• B. Cisco TelePresence TX9000
• C. Cisco TelePresence SX10
• D. Cisco TelePresence DX70

Answer: C

NEW QUESTION 7

A video engineer has opened a ticket with Cisco TAC for support and the TAC engineer has requested system information such as software version of Cisco VCS. Where does the video engineer find this information?

• A. System
• B. Maintenance
• C. Configuration
• D. Status

Answer: D

NEW QUESTION 8

Which profile must be added to the end user profile when enabling an end user for Cisco Unified Presence?

• A. device profile
• B. UC service profile
• C. extension mobility profile
• D. SIP profile

Answer: B

NEW QUESTION 9

A customer wants a Cisco TelePresence MCU solution that supports up to 40 FullHD 1080p sessions. Which solution should the customer use?

• A. a stack of Cisco TelePresence MCU 5320s
• B. a stack of Cisco TelePresence MCU 4520s
• C. a Cisco TelePresence MSE 8000 with clustered Cisco TelePresence MCU MSE 8420s
• D. a Cisco TelePresence MSE 8000 with clustered Cisco TelePresence MCU MSE 8510s

Answer: D

NEW QUESTION 10






Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint. What are two valid ways to accomplish this task? (Choose two.)

• A. Exhibit A
• B. Exhibit B
• C. Exhibit C
• D. Exhibit D
• E. Exhibit E

Answer: AD

NEW QUESTION 11

In which two locations can you find registration information for a video endpoint? (Choose two.)

• A. from the endpoint touch panel on the Settings > System Information screen
• B. from the endpoint web interface on the Home screen
• C. from the Cisco VCS in the Status > System screen
• D. from the Cisco TMS on the Systems > Provisioning screen

Answer: AB

NEW QUESTION 12

Refer to the exhibit.

A call with a destination alias of 15551001234 reaches a Cisco TelePresence VCS. Which transform will the destination alias match?

• A. Transform 1
• B. Transform 2
• C. Transform 3
• D. Transform 4

Answer: B

NEW QUESTION 13

An engineer must ensure that a user can create content playlists for Digital Signs and Show and Share. Which Cisco Digital Media Suite component allows playlists to be created?

• A. Cisco DMD
• B. Cisco DMM
• C. Cisco TMS
• D. Cisco MXE

Answer: B

NEW QUESTION 14

Which two parameters of the license management set log level product_instances CLI command on the Cisco Prime License Manager are valid? (Choose two.)

• A. warning
• B. error
• C. emergencies
• D. critical
• E. alert

Answer: AB

NEW QUESTION 15

Which Cisco video endpoints run on the Android operating system?

• A. EX-Series
• B. DX-Series
• C. C-Series
• D. MXP-Series

Answer: B

NEW QUESTION 16

Which option is the embedded component that enables endpoints and collaboration applications to support medianet functionality?

• A. Media Services Interface
• B. Open API
• C. XMPP
• D. SNMP
• E. Medianet Agent
• F. SDN

Answer: A

NEW QUESTION 17

An engineer needs to configure a mobile device that registers with Cisco Unified Communications Manager to utilize voice and video services. The device is Android-based. The username in Cisco Unified Communications Manager is "rsmith." What is the proper device name for the engineer to configure?

• A. ANDRSMITH
• B. ANDSMITHR
• C. BTDRSMITH
• D. BOTRSMITH
• E. UCMRSMTH

Answer: D

NEW QUESTION 18

An end user using C series codec wants to change the participant layout for a meeting hosted on a Cisco TelePresence Server. What are three valid layout options available in codec web interface? (Choose three.)

• A. single screen
• B. loudest speaker
• C. rolling
• D. equal
• E. custom
• F. overlay

Answer: ADF

NEW QUESTION 19

Refer to the exhibit.

Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two.)

• A. The Cisco Unified Communications Manager IM and Presence Service is not available.
• B. The username and password in Cisco Jabber phone services are misconfigured.
• C. The Cisco Jabber initial audio and video settings need to be set.
• D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.
• E. The Cisco Jabber does not have the correct phone button template and hence cannot register to the Cisco Unified Communications Manager.
• F. The called user presence status is unknown.

Answer: BD

NEW QUESTION 20

On a video endpoint running TC software, which two SIP settings are the minimum needed to register the endpoint to a Cisco VCS? (Choose two.)

• A. URI
• B. loginname
• C. password
• D. E.164 address
• E. gatekeeper
• F. proxy address
• G. domain

Answer: AF

NEW QUESTION 21

A network administrator is asked to configure a video conference using the Cisco TelePresence MCU 5300. There is a requirement for participants to start with the same layout when joining the conference. How can this goal be accomplished?

• A. Layouts cannot be customized on the MCU 5300.
• B. Configure a custom layout for each user individually.
• C. Configure a custom layout and apply the layout to all new participants.
• D. Allow each endpoint to configure its own layout.

Answer: C

NEW QUESTION 22

I release a value of acoustic 25 db at a distance of 1 foot. What am I measuring?

• A. NC
• B. SPL
• C. direct ambient reflection
• D. STC
• E. local resonance

Answer: C

NEW QUESTION 23

Cisco TelePresence Immersive Endpoint devices support a feature that allows objects, documents, or PC applications to be presented in a plug-and-play fashion. What is this feature called?

• A. Cisco TelePresence Content Sharing
• B. Cisco TelePresence Auto Collaborate
• C. Cisco TelePresence Multichannel
• D. Cisco TelePresence Content Stream

Answer: B

NEW QUESTION 24

An important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Which page would be a good place to start for troubleshooting the issue on the affected endpoint?
A)

B)

C)

D)

• A. Exhibit A
• B. Exhibit B
• C. Exhibit C
• D. Exhibit D

Answer: A

NEW QUESTION 25

Refer to the exhibit.

In the SDP that is displayed, to which IP address and port should the receiving end send its content video channel media?

• A. 192.168.1.4:2048
• B. 192.168.1.4:50000
• C. 192.168.1.5:50002
• D. 192.168.1.5:50008

Answer: D

NEW QUESTION 26

When a call is placed from a Cisco VCS registered SIP-only endpoint to an H.323-only endpoint, which type of call license is consumed?

• A. traversal call
• B. non-traversal call
• C. on-net call
• D. interworking call
• E. off-net call
• F. Cisco Unified Workspace Licensing

Answer: A

NEW QUESTION 27
......