NEW QUESTION 1
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)

• A. Destination MAC
• B. Load Balanced Source IP
• C. Failover Order
• D. Destination Port
• E. Load Balanced Source MAC
• F. Load Balanced Source

Answer: CEF

NEW QUESTION 2
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?

• A. esxcli network firewall ruleset -e syslog
• B. esxcli network firewall ruleset set -a -e false
• C. esxcli network firewall ruleset set -r syslog -e true
• D. esxcli network firewall ruleset set -r sysloq -e false

Answer: C

NEW QUESTION 3
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

• A. Create a secondary vNIC on each quest VM for SVM communication.
• B. Place a partner SVM on each compute cluster node.
• C. Centralize partner SVMs in a service cluster.
• D. Add partner SVMs to an edge cluster.

Answer: B

Explanation:
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."

NEW QUESTION 4
The NSX Control Plane is responsible for which two functions? (Choose two.)

• A. receive and validate configuration from NSX Policy
• B. host API services
• C. propagate topology information
• D. push stateless configurations to forwarding engines
• E. maintain packet-level statistics

Answer: CD

NEW QUESTION 5
What are three characteristics of a transport zone? (Choose three.)

• A. defines the potential reach of transport nodes
• B. configured with a Single N-VDS
• C. defines the scope and reachability of a Segment
• D. configured with multiple N-VDS
• E. optional for creating a segment

Answer: ABC

NEW QUESTION 6
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

• A. set time-server
• B. get timezone
• C. set ntp-server
• D. set timezone

Answer: C

NEW QUESTION 7
What are three NSX Manager roles? (Choose three.)

• A. cloud
• B. manager
• C. zookeeper
• D. policy
• E. master
• F. controller

Answer: BDF

NEW QUESTION 8
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

• A. Segment Port
• B. Group
• C. Segment
• D. DFW
• E. Tier-1 Gateway

Answer: BD

NEW QUESTION 9
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?

• A. Cloud Service Administrator
• B. Network Engineer
• C. Network Operator
• D. NSX Administrator

Answer: B

NEW QUESTION 10
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center. What is the minimum MTU size for the UPLINK profile?

• A. 1500
• B. 1650
• C. 1550
• D. 1600

Answer: D

NEW QUESTION 11
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?

• A. set service nsx-manager logging-level debug
• B. set service nsx-manager log-level debug
• C. set service manager log-level debug
• D. set service manager logging-level debug

Answer: D

Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264

NEW QUESTION 12
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

• A. Advertise All LB SNAT IP Routes
• B. All Static Routes
• C. Information
• D. Advertise All LB VIP Routes
• E. Advertise All NAT Routes

Answer: AD

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-9

NEW QUESTION 13
Which CLI command shows syslog on NSX Manager?

• A. show log manager follow
• B. get log-file auth.log
• C. get log-file syslog
• D. /var/log/sysloq/syslog.log

Answer: C

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E

NEW QUESTION 14
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

• A. Multicast routing is implemented with PIM Sparse-Mode.
• B. IGMP Snooping is used to populate multicast forwarding tables.
• C. Tier-0 gateways can be the Rendezvous Point.
• D. Multicast is supported in ESXi and KVM transport nodes.
• E. An Edge can be the Rendezvous Point.

Answer: AB

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION 15
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?

• A. SR and DR doesn’t need to be connected to provide any stateful services.
• B. DR is instantiated and automatically connected with SR.
• C. SR is instantiated and automatically connected with DR.
• D. SR and DR is instantiated but requires manual connection.

Answer: C

NEW QUESTION 16
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

• A. Route Aggregation
• B. Route Distribution
• C. Graceful Restart
• D. BGP Neighbors
• E. Local AS

Answer: AD

Explanation:
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
• Local AS
• Graceful restart
• Graceful restart timer
• Graceful restart stale timer
• Multipath relax
Inter-SR iBGP is not supported in VRF gateways. BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.

NEW QUESTION 17
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

• A. SYSTEM
• B. FABRIC
• C. GROUPING
• D. MONITORING

Answer: B

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION 18
How does Traceflow tool identify issues in a network?

• A. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
• B. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
• C. Injects synthetic traffic into the data plane and observes the results in the control plane.
• D. Injects ICMP traffic into the data plane and observes the results in the control plane.

Answer: C

NEW QUESTION 19
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

• A. esxcli network diag ping -H <destination IP address>
• B. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
• C. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
• D. esxcli network diag ping -I vmk0 -H <destination IP address>

Answer: C

Explanation:
https://kb.vmware.com/s/article/1003728

NEW QUESTION 20
What are two supported N-VDS modes? (Choose two.)

• A. DPDK Datapath
• B. Overlay Datapath
• C. Secure Datapath
• D. Enhanced Datapath
• E. Standard Datapath

Answer: DE

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960

NEW QUESTION 21
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)

• A. Port NAT
• B. Source NAT
• C. Destination NAT
• D. 1:1 NAT
• E. Reflexive NAT

Answer: BC

NEW QUESTION 22
......