300-365 Exam
Real 300-365 secret Reviews & Tips
Master the 300-365 Deploying Cisco Wireless Enterprise Networks content and be ready for exam day success quickly with this Testking 300-365 exam. We guarantee it!We make it a reality and give you real 300-365 questions in our Cisco 300-365 braindumps.Latest 100% VALID Cisco 300-365 Exam Questions Dumps at below page. You can use our Cisco 300-365 braindumps and pass your exam.
Q1. What address do PIM routers listen to in order to automatically discover the best RP for each multicast group?
A. 224.0.0.13
B. 224.0.1.39
C. 224.0.0.14
D. 224.0.140
Answer: D
Q2. What devices can be tracked with the Cisco Context Aware Services?
A. Only wired devices.
B. Both wired and wireless devices.
C. Only Cisco certified wireless devices.
D. Only wireless devices.
Answer: B
Q3. Refer to Exhibit.
A wireless client is connecting to FlexAPI which is currently working standalone mode. The AAA authentication process is returning the following AVPs:
Tunnel-Private-Group-ld(81): 15 Tunnel-Medium-Type(65):IEEE-802(6) Tunnel-Type(64): VLAN(13)
Which three behaviors will the client experience? (Choose three.)
A. While the AP is in standalone mode, the client will be placed in VLAN 15.
B. While the AP is in standalone mode, the client will be placed in VLAN 10.
C. When the AP transitions to connected mode, the client will be de-authenticated.
D. While the AP is in standalone mode, the client will be placed in VLAN 13.
E. When the AP is in connected mode, the client will be placed in VLAN 13.
F. When the AP transitions to connected mode the client will remain associated.
G. When the AP is in connected mode, the client will be placed in VLAN 15.
H. When the AP is in connected mode, the client will be placed in VLAN 10.
Answer: A,D,E
Q4. A network engineer is experiencing issues enabling LAG on the WLC. Which four characteristics should be validated to ensure LAG configuration? (Choose four.)
A. All ports participate in the LAG by default when LAG is enabled on the controller, y
B. Dynamic interfaces and management are moved to port 1
C. Primary and secondary ports are needed for each interface.
D. Multiple untagged interfaces to the same port are not allowed.
E. EtherChannel must be configured for mode "on" on the switch.
F. Only one functional physical port is needed to continue to pass traffic.
G. Multiple LAGs are permitted on the controller.
H. The WLC does not need to be rebooted to enable the LAG configuration.
Answer: A,D,E,F
Q5. What is the best practice for setting the WLC v7.0 use of WLAN QoS settings to support SIP phones on a VoWLAN?
A. Configure SIP with static CAC only with SIP call snooping.
B. Configure SIP with static CAC only without SIP call snooping.
C. Configure SIP with load-based CAC only with SIP call snooping.
D. Configure SIP with load-based CAC only without SIP call snooping.
E. Configure SIP with load-based CAC and TSPEC only with SIP call snooping.
Answer: A
Q6. An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)
A. static VLAN on client
B. ACL
C. AP group
D. static IP on client
E. MAC filtering
F. RF group
G. AAA override
Answer: C,G
Q7. An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task?
A. Change the AVC application WebEx-app-sharing to mark
B. Create an ACL for WebEx.
C. Change the WLAN reserved bandwidth for WebEx.
D. Create an AVC profile for WebEx marked with a lower DSCP value
Answer: A
Q8. By default, how long does a Mobility Services Engine wait for an echo response from a Wireless LAN Controller before declaring the neighbor dead?
A. 10 Seconds
B. 60 Seconds
C. 15 Seconds
D. 30 Seconds
Answer: D
Q9. A customer has limited staff to manage a wireless network. The customer wants a solution that requires minimum hardware. Which type of architecture do you propose?
A. centralized
B. distributed
C. cloud-based
D. unified
Answer: A
Q10. A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance. The engineer cannot access the system using the root password and the Grub password as the details had never been documented. How should the engineer perform the password recovery?
A. Use a console cable.
B. Contact Cisco TAC and arrange an RMA of the MSE.
C. Boot the MSE using the software installation DVD.
D. The Password can be reset using Prime Infrastructure.
Answer: A