70-243 Exam
Ideas to 70 243 pdf
Testking offers free demo for 70 243 exam exam. "Administering and Deploying System Center 2012 Configuration Manager", also known as 70 243 exam exam, is a Microsoft Certification. This set of posts, Passing the Microsoft 70 243 dumps exam, will help you answer those questions. The exam 70 243 Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft exam 70 243 exams and revised by experts!
Q31. Your network contains a System Center 2012 Configuration Manager environment. The environment contains a reporting services point.
A group of users is responsible for creating custom reports. The custom reports will be published.
You need to identify which tools can be used to create and publish custom reports to Microsoft SQL Server Reporting Services (SSRS).
Which tools should you identify? (Choose all that apply.)
A. Report Builder
B. Microsoft SQL Server Business Intelligence Development Studio
C. Microsoft Access 2010
D. Reporting Services Configuration Manager
E. Microsoft SQL Server Management Studio
Answer: A,B
Explanation:
Overview of Custom Reports Custom reports are intended for advanced users who are comfortable creating their own reports by using Microsoft SQL Server Reporting Services and SQL Server Business Intelligence Development Studio, SQL Server Reporting Services Report Builder, or Microsoft Visual Studio Report Designer.
Reference: Overview of Custom Reports
http://technet.microsoft.com/en-us/library/gg508710.aspx
Q32. Your network contains a System Center 2012 Configuration Manager environment.
The environment contains a single primary site.
You need to provide users with the ability to remotely reset their mobile device to the factory settings.
What should you install?
A. Application Catalog web service point and Application Catalog website point
B. Out of Band service point and Application Catalog web service point
C. Device management point and System Health validator point
D. System Health Validator point and Application Catalog website point
Answer: A
Explanation:
A self-service application website, the Application Catalog, lets users search for, install, and request Windows applications. Users who have mobile devices can also use this website to wipe their mobile devices.
Reference: Introduction to Application Management in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682125.aspx
Q33. Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment.
Software Inventory and Hardware Inventory are enabled for all of the client computers. All of the client computers have an application named App1 installed. App1 saves files to the C:\ABC folder. All of the files saved by App1 have a file name extension of .abc.
You configure Software Inventory to inventory all of the files that have the .abc extension
and the .exe extension.
After six months, you discover that some of the client computers fail to inventory .abc files.
All of the client computers inventory .exe files.
You need to ensure that the .abc files are inventoried.
What should you do?
A. Modify C:\ABC\Skpswi.dat.
B. Delete C:\ABC\Skpswi.dat.
C. Modify C:\Program Files\App1\NO_SMS_On_Drive.sms.
D. Delete C:\Program Files\App1\NO_SMS_On_Drive.sms.
Answer: B
Explanation: You can create a hidden file named Skpswi.dat and place it in the root of a client hard drive to exclude it from software inventory. You can also place this file in the root of any folder structure you want to exclude from software inventory.
To exclude folders from software inventory . Using Notepad.exe, create an empty file named SkpSwi.dat. . Right click the SkpSwi.dat file and click properties. In the file properties for the
SkpSwi.dat file, select the Hidden attribute. . Place the SkpSwi.dat file at the root of each client hard drive or folder structure that you wish to exclude from software inventory.
Reference: How to Exclude Folders From Software Inventory
https://technet.microsoft.com/en-us/library/bb632671.aspx
Q34. DRAG DROP
Your network contains a single Active Directory domain named contoso.com. System
Center 2012 R2 Configuration Manager Service Pack 1 (SP1) is deployed to contoso.com.
You have a Windows 8.1 operating system image named Image1 in Configuration
Manager. Image1 has the data source of \\server1.contoso.com\source\Image1.wim.
New client computers are deployed by using Image1.
You have an application named App1. App1 is a configuration utility that must be installed
by using a Windows Installer (MSI) package.
You need to ensure that App1 is included in all future deployments of Image1.
Which four actions should you perform in sequence? To answer, move the appropriate
actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q35. Your company uses System Center 2012 Configuration Manager to deploy applications.
The company purchases a new application named App1. App1 can be installed only on client computers that run Windows 7.
You need to ensure that App1 is installed only on Windows 7 computers that have at least 2 Gb of memory and 300 Gb of free disk space.
What should you create?
A. a Query object
B. custom client user settings
C. a configuration baseline
D. requirement rules
Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/gg682082.aspx How to Deploy Applications in Configuration Manager Before you can deploy an application in Microsoft System Center 2012 Configuration Manager, you must create at least one deployment type for the application. http://technet.microsoft.com/en-us/library/gg682174.aspx
How to Create Deployment Types in Configuration Manager
Steps to Create a Deployment Type
Step 1: Start the Create Deployment Type Wizard.
Step 2: Specify whether you want to automatically detect or to manually define the
deployment type information.
Step 3: Specify the content options for the deployment type.
Step 4: Configure the detection methods to indicate the presence of the application.
Step 5: Specify the user experience options for the deployment type.
Step 6: Specify the requirements for the deployment type.
Requirements are used to specify the conditions that must be met before a deployment
type can be installed on a client device.
Step 7: Specify the dependencies for the deployment type.
Step 8: Confirm the deployment type settings and complete the wizard.
Step 9: Configure additional options for the deployment types that contain virtual
applications.
http://technet.microsoft.com/en-us/library/gg682174.aspx#BKMK_Step61
Step 6: Specify Requirements for the Deployment Type
1. On the Requirements page of the Create Deployment Type Wizard, click Add to open the Create Requirement dialog box, and add a new requirement.
2. From the Category drop-down list, select whether this requirement is for a device or a user, or select Custom to use a previously created global condition. When you select Custom, you can also click Create to create a new global condition.
Important: If you create a requirement of the category User and the condition Primary Device, and then deploy the application to a device collection, the requirement will evaluate as false.
3. From the Condition drop-down list, select the condition that you want to use to assess whether the user or device meets the installation requirements. The contents of this list will vary depending on the selected category.
4. From the Operator drop-down list, choose the operator that will be used to compare the selected condition to the specified value to assess whether the user or device meets in the installation requirement. The available operators will vary depending on the selected condition.
5. In the Value field, specify the values that will be used with the selected condition and operator whether the user or device meets in the installation requirement. The available
values will vary depending on the selected condition and the selected operator.
6. Click OK to save the requirement rule and exit the Create Requirement dialog box.
7. On the Requirements page of the Create Deployment Type Wizard, click Next. http://technet.microsoft.com/en-us/library/gg682048.aspx How to Create Global Conditions in Configuration Manager In System Center 2012 Configuration Manager, global conditions are rules that represent business or technical conditions that you can use to specify how an application is provided and deployed to client devices.
Q36. Your network contains a System Center 2012 Configuration Manager environment as shown in the exhibit. (Click the Exhibit button.)
(The exhibit shows that: Server5 and Server6 are in the perimeter network, while Server1, Server2, Server3, and Server4 are in the internal network.)
The network contains six servers. The servers are configured as shown in the following table.
You need to ensure that mobile device information is available in the hardware inventory.
What should you do first?
A. Install a management point on Server5.
B. Configure IIS to support only HTTPS on Server5.
C. Install a management point on Server2.
D. Install Network Load Balancing (NLB) on Server3.
E. Install an enrollment proxy point on Server6.
F. Configure IIS to support only HTTP on Server3.
G. Configure the Exchange connector on Server3.
H. Install Network Load Balancing (NLB) on Server6.
I. Install a PXE-enabled protected distribution point on Server5.
J. Install the Windows Cluster service on Server3.
K. Install a PXE-enabled protected distribution point on Server4.
L. Install the Windows Cluster service on Server6.
M. Install Windows Server Update Services (WSUS) on Server3.
N. Install a protected distribution point on Server1.
O. Install a software update point on Server3.
Answer: G
Explanation: ***
http://technet.microsoft.com/en-us/library/gg682022.aspx Determine How to Manage Mobile Devices in Configuration Manager The following table lists these four mobile device management methods and provides information about the management functions that each method supports:
Reference: Determine How to Manage Mobile Devices in Configuration Manager http://technet.microsoft.com/en-us/library/gg682022.aspx
Q37. Your network contains a System Center 2012 Configuration Manager environment.
The hierarchy contains a Central Administration Site named Site1 and a primary site named Site2.
You discover that none of the collections created on Site1 are displayed on Site2.
You need to identify whether there is replication issue between the sites.
What should you review?
A. the Colleval.log file.
B. the Despool.log file
C. the Rcmctrl.log file
D. the Sender.log file
Answer: C
Explanation:
Technical Reference for Log Files in Configuration Manager - Site Server and Site System
Server Logs rcmctrl.log:
Site server log file Records the activities of database replication between sites in the
hierarchy.
Reference: Technical Reference for Log Files in Configuration Manager - Site Server and
Site System
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SiteSiteServerLog
Q38. You network has System Center Configuration Manager 2007 R3 deployed. The Active Directory schema is extended for System Center Configuration Manager 2007 R3.
You plan to deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to a new server.
You need to ensure that System Center 2012 R2 Configuration Manager SP1 can publish information to Active Directory.
Which container’s permissions should you modify?
A. System\Policies
B. System\IP Security
C. System\System Management
D. System\WMIPolicy
Answer: C
Explanation: The Publishing Status shown in the Active Directory Forests list view is a status summary of all sites in the hierarchy. The status will show 'Failed' if any sites in the hierarchy failed to publish to the forest. To view published site information, open Active Directory Users and Computers, connect to a domain controller in the forest, and go to View-> Advanced Features. Site and management point information is published under the System-> System Management node.
Reference: Active Directory Forest Discovery and Publishing in Configuration Manager 2012 Beta 2
http://blogs.technet.com/b/configmgrteam/archive/2011/03/30/active-directory-forest-discovery-and-publishing-in-configuration-manager-2012-beta-2.aspx
Q39. DRAG DROP
Your company has two offices named Office1 and Office2.
You plan to deploy a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) Central Administrative site to Office1 and a primary site to Office2.
You need to identify which firewall ports you must allow between Office1 and Office2 for inter-site communication.
Which firewall ports should you identify? To answer, drag the appropriate ports to the correct locations. Each port may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q40. You have Windows 7 images that are rebuilt quarterly and sported to System Center 2012 Configuration Manager.
The Microsoft Deployment Toolkit (MDT) 2012 is integrated with Configuration Manager.
You need to reduce the network security risks when the images are deployed by using Operating System Deployment (OSD).
What should you do? (Choose all that Apply.)
A. After the Apply Operating System Image task sequence step, add a step to install software updates offline.
B. Before the Apply Operating System image task sequence step, add a step to install Deployment Imaging Servicing and Management (DISM).
C. After the installation of the final Application, add an Install Software Updates task sequence step.
D. After the Apply Operating System Image task sequence step, add a Run Command line step that runs wuauclt.exe /detectnow
E. Before the Apply Operating System image task sequence step, add a step to install the Windows Automated Installation Kit (Windows AIK).
Answer: A,C
Explanation:
A: To do the updates offline to reduce network security risks.
C: Install software updates to minimize network security risks
Note: Configuration Manager 2012: Offline Servicing for Operating System Images In Configuration Manager 2012 there is a new feature for applying updates to operating system images while they are in the Configuration Manager library. This means any operating system image you see in the Operating Systems > Operating Systems Images node from the Software Library wunderbar can be updated with Component Based Servicing (CBS) updates. By updating an image in the Software Library instead of performing a new build and capture of the operating system image you will gain a few distinct advantages. You will be able to reduce the risk of vulnerabilities during operating system deployments and reduce the overall operating system deployment to the end user. You will also reduce the administrative effort to maintain your operating system images.
Task Sequence Steps in Configuration Manager The following task sequence steps can be added to a System Center 2012 Configuration Manager task sequence:
Install Software Updates Use the Install Software Updates task sequence step to install software updates on the destination computer. The destination computer is not evaluated for applicable software updates until this task sequence step runs. At that time, the destination computer is evaluated for software updates like any other Configuration Manager-managed client. In particular, this step installs only the software updates that are targeted to collections of which the computer is currently a member. This task sequence step runs only in a standard operating system. It does not run in Windows PE. Further information: http://technet.microsoft.com/en-us/library/hh824821.aspx Deployment Image Servicing and Management (DISM) Technical Reference Deployment Image Servicing and Management (DISM) is a command-line tool that is used to mount and service Windows. images before deployment. You can use DISM image management commands to mount, and get information about, Windows image (.wim) files or virtual hard disks (VHD) and to capture, split, and otherwise manage .wim files.
Reference:
http://blogs.technet.com/b/inside_osd/archive/2011/04/18/configuration-manager-2012-offline-servicing-foroperating-system-images.aspx
http://technet.microsoft.com/en-us/library/hh846237.aspx
Incorrect:
wuauclt.exe /detectnow
The detectnow switch will force a relatively immediate query to the WSUS server to see if there are any updates that are needed. If there are, the yellow shield will appear in the system tray. This is usually pretty quick, within 20-30 seconds.