NEW QUESTION 1
A customer needs to add another HPE 3PAR StoreServ system and plans to use the federated storage approach.
Which advantages can the customer expect? (Choose two.)

• A. load balancing
• B. reduced power, cooling, and environmental impacts
• C. allows multiple management tools
• D. easier migration
• E. federated deduplication

Answer: CD

NEW QUESTION 2
A customer need a backup solution to their virtualized environment .The backup solution must be agentless ,hypervise independent and integrated with HPE storage solutions. The solution must support Nimble snapshot and replication management. What products meets the customer requirement?

• A. HPE storeOnce Recovery manager central
• B. Commvault Simpana Intellisnap
• C. Micro Focus Data Protector
• D. Veem Backup and Replication

Answer: D

NEW QUESTION 3
How does HPE StoreVirtual DSM for windows enhanced Microsoft windows native MPIO?

• A. It automatically create an I/O path to each storage system in the cluster
• B. It automatically adjusts transfer block
• C. It automatically combines HPE thin provisioning and volume migration technology
• D. It automatically adjusts the availability bandwidth between the switch and the array

Answer: A

NEW QUESTION 4
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?

• A. HPE 3PAR Access Guard
• B. HPE 3PAR Persistent Ports
• C. HPE 3PAR Persistent Cache
• D. HPE 3PAR MPIO

Answer: B

NEW QUESTION 5
Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

• A. NinjaProtected
• B. NinjaStars
• C. NinjaCrawler
• D. StoreVista

Answer: B

NEW QUESTION 6
A customer with an HPE 3PAR StoreServ needs to upgrade their aging backup solution to a more advanced solution using snapshots and deduplication.
Which HPE products would meet the customer’s needs? (Choose two.)

• A. HPE 3PAR File Persona
• B. HPE StoreEver
• C. HPE 3PAR Remote Copy
• D. HPE StoreOnce
• E. HPE Recovery Manager Central

Answer: CD

NEW QUESTION 7
A customer need to server 40TB via file protocols including SMB and FTP to a board range of
client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?

• A. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
• B. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona
• C. HPE StoreOnce 5500with data in fight encryption .
• D. HPE XP7 storage with encryption ready disk adapters

Answer: B

NEW QUESTION 8
An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?

• A. Dynamic Optimization using tier 2
• B. Adaptive Optimization using tier 1
• C. Dynamic Optimization between tier 0 and tier 1
• D. Dynamic Optimization using tier 1

Answer: B

NEW QUESTION 9
When using a HPE 3 PAR Storeserv array to enable a user to apply array–based data services to specific application and VM’s. What is the benefit of implementing VM-level gradually of Volts?

• A. Data sprawls eliminated by performing the migration functions at the array level using 3PAR HPE Dynamic Optimization
• B. Efficiency is maintained by reclaiming space from deleted or migrated VMs using capabilities built into the storage ASIC
• C. Performing is accelerated by detecting and moving the most frequently –accessed VMs into the fast class tier
• D. Performance is accelerated by leveraging the deduplication capabilities built into the storage ASIC

Answer: B

NEW QUESTION 10
Which built-in HPE 3PAR StoreServ technology reduces database transaction logs response time?

• A. Express Writes
• B. Adaptive Flash Cache
• C. Thin provisioning
• D. Thin Deduplication

Answer: B

NEW QUESTION 11
Which HPE storage solutions offer a two-tier backup solution for hybrid cloud with optimal recovery time? (Choose two.)

• A. Simplivity 380
• B. Nimble SF series
• C. 3PAR 8000 series
• D. StoreOnce with Catalyst
• E. Nimble CS series

Answer: AD

NEW QUESTION 12
Which value does a Nimble solution provide in addition to other HPE storage solutions?

• A. Flat support pricing for all hardware components
• B. Future-proofed for newer technologies
• C. All-inclusive software licensing over 5 years and additional capacity upgrades
• D. Upfront option for free controller upgrade after 3 years

Answer: B

NEW QUESTION 13
Refer to the exhibit:

Which type of data format do you expect in the red rectangle?

• A. 172.16.31.11/24
• B. 94:b4:0f:cd:34:8a
• C. iqn.2015-02.com.hpe:oneview-vcgeDav000
• D. 20110002AC00736E235.524

Answer: D

NEW QUESTION 14
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?

• A. Persistent Memory
• B. Persistent port (96)
• C. Peer persistenceD Persistent Cache

Answer: B

NEW QUESTION 15
Which storage protocol is supported by virtual connect Flex-10?

• A. FCoE
• B. FC
• C. ISCSI
• D. FCIP

Answer: C

NEW QUESTION 16
Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?

• A. ASIC
• B. physical disk
• C. processor
• D. host

Answer: B

NEW QUESTION 17
A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.
Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

• A. LACP
• B. NPIV
• C. FSPF
• D. VSF

Answer: C

NEW QUESTION 18
A customer is a cloud service provider with infrastructure powered by HPE 3PAR Storeserv 9000.The customer is concern about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants. What should you recommended to your customer ?

• A. Use priority optimization to enable service level for workloads
• B. Use virtual domain to automatically set multi-tenant policies
• C. Use dynamic optimization to automatically manage quality of service
• D. Use adaptive optimization to optimize service level automatically

Answer: A

NEW QUESTION 19
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement. Which HPE solution component should you discuss with the customer first?

• A. HPE SimpliVity 380
• B. HPE MSA 2052 Storage
• C. HPE Nimble CS1000 system
• D. HPE 3PAR StoreServ 8200

Answer: A

NEW QUESTION 20
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)

• A. ISCSI network(SAN)
• B. Ethernet network (LAN)
• C. storage
• D. application
• E. operating system
• F. host

Answer: ADF

NEW QUESTION 21
An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal .The solution must scale to allow for substantial growth over the next five years?

• A. Nimble SF series
• B. Nimble AF series
• C. Nimble cloud volume
• D. Nimble CS series

Answer: B

NEW QUESTION 22
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?

• A. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
• B. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
• C. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
• D. Design an array with older version of the firmware to ensure compatibility

Answer: B

NEW QUESTION 23
Which storage tool in the storage assessment foundry provide data protection analysis?

• A. Ninja protected+ (318)
• B. NinjaCrawler
• C. Ninja Thin
• D. Ninja Stars

Answer: A

NEW QUESTION 24
Match the data access type in a SAN fabric to the correct description.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 25
A customer currently has a CS1000H and wants to upgrade to a CS3000. What must be considered before upgrading?

• A. This upgrade is disruptive and needs planned downtime.
• B. A capacity upgrade to a fully populated array has to be performed first.
• C. Timeless storage support is not offered for CS1000H entry-level systems.
• D. A controller upgrade to a CS1000F has to be performed first.

Answer: B

NEW QUESTION 26
......