NEW QUESTION 1
A customer uses VLANs in their network. They recently acquired another company and need to extend the number of VLANs to 7400 to accommodate the growth. What should you advise?

• A. Implement an IPv6 only environment
• B. Edit the /etc/network/config file, and set VLAN_LIMIT=7401
• C. Upgrade the NICs to models that support RoCE
• D. Transition to a VXLAN or NVGRE network configuration

Answer: D

NEW QUESTION 2
What is required to implement Core Boosting? (Choose two.)

• A. HPE Cloudline
• B. HPE Apollo
• C. ProLiant Gen 10
• D. iLO5 Advanced
• E. HPE Synergy

Answer: CD

NEW QUESTION 3
A customer wants to implement a large Microsoft Storage Spaces Direct environment. Which protocol should the customer use?

• A. VXLAN
• B. RDMA
• C. OSPF
• D. NVGRE

Answer: D

NEW QUESTION 4
A customer plans to replace their c7000 equipment with Synergy.
What is the most important thing to consider about installing Synergy in the existing rack environment?

• A. A Synergy frame is physically deeper than a c7000
• B. A Synergy frame is taller than the 10 U required for a c7000
• C. A Synergy frame requires more power feeds than a c7000
• D. A Synergy composer requires 2 additional rack units

Answer: A

NEW QUESTION 5
A customer wants to use iLO Federation to manage firmware deployments with HPE SUM. Which options are included? (Select two.)

• A. Automatically discover iLO Federation groups on the same management network
• B. Apply updates to all members of iLO Federation group with an iLO standard license
• C. iLO federation is leveraging ICsp functionality to update firmware
• D. Update all applicable firmware on HPE ProLiant servers through the iLO using offline deployment
• E. Update the iLO firmware and system ROM offline through the iLO Federation group

Answer: BD

NEW QUESTION 6
A customer needs to track contract and warranty status and monitor support cases. What service option should you recommend?

• A. HPE UEFI Diagnostics
• B. HPE Proactive Service Credits
• C. HPE Insight Online
• D. HPE iLO5 Federation

Answer: B

NEW QUESTION 7
A customer has a two frame Synergy setup with two Virtual Connect SE 40Gb F8 modules and two 20Gb Interconnect Link Module interconnect modules. The customer needs to expand into a third frame.
Which interconnect modules should be used to extend the logical enclosure?

• A. 2 x 20Gb Interconnect Link Modules
• B. 1 x Virtual Connect SE 40Gb F8 Interconnect Link Modules and 1 x 20Gb Interconnect Link Modules
• C. 2 x Virtual Connect SE 40Gb F8 Interconnect Link Modules
• D. 4 x Virtual Connect SE 40Gb F8 Interconnect Link Modules

Answer: A

NEW QUESTION 8
Your customer has 500 SY480 Gen10 compute nodes running a variety of physical and virtual workloads. They are looking for a way to get a unified view of the entire environment.
Which product should you recommend?

• A. HPE OneView for VMware vCenter
• B. HPE OneView Global Dashboard
• C. HPE OneView for Microsoft System Center
• D. HPE OneView for Red Hat Enterprise Virtualization

Answer: B

NEW QUESTION 9
A customer has an existing Hadoop installation built on DL380 Gen9 24SFF servers. You need to review their existing installation and provide recommendations on how to achieve their stated storage density goal of over 5PB per server cabinet.
Which HPE solution should you recommend?

• A. HPE DL580 Gen10
• B. HPE Apollo 6500
• C. HPE Apollo 4510
• D. HPE ML350 Gen10

Answer: C

NEW QUESTION 10
Which product provides an interface for customers to monitor device health, hardware events, and contract and warranty status?

• A. Intelligent Provisioning
• B. Insight Online
• C. HPE OneView Global Dashboard
• D. HPE OneView

Answer: B

NEW QUESTION 11
Your customer is interested in Synergy and composable infrastructure. They are concerned that operational savings may not meet expectations since operating system installation consumes a great deal of time.
Which feature should you highlight to overcome the objection?

• A. The Synergy Composer provides HTTPS boot services
• B. The Synergy Frame Link modules provide PIXE operating boot partitions
• C. The Synergy Composer can provision operating systems in seconds
• D. The Synergy Image Streamer can provision operating systems in seconds

Answer: D

NEW QUESTION 12
A customer needs to migrate their current c7000 network and Fibre Channel infrastructure to a converged network.
Which interconnect module should the customer use?

• A. HPE Flex10
• B. HPE 8Gb Fibre Channel pass-through
• C. HPE FlexFabric 20/40 F8
• D. HPE 16Gb/24-port Fibre Channel switch

Answer: C

NEW QUESTION 13
What is a benefit of NVMe technology?

• A. optimized SMB workloads
• B. minimized network bandwidth
• C. lower application costs
• D. low latency data access

Answer: D

NEW QUESTION 14
A financial customer has a remote office that requires a significant amount of computing resources, but has no local IT staff. They need simple and affordable management and disaster recovery of their site.
Which solution should you recommend to meet this customer’s needs?

• A. HPE ConvergedSystem 300
• B. HPE SimpliVity 380
• C. HPE StoreOnce 5100
• D. HPE Serviceguard for Linux

Answer: B

NEW QUESTION 15
A customer has c7000 enclosures with Virtual Connect 20/40 F8 interconnect modules providing Ethernet and Fibre Channel connectivity. They are starting a proof of concept (PoC) to evaluate using a Synergy with the HPE Virtual Connect SE 40Gb F8 interconnect module as the next generation infrastructure.
Which additional component is required to enable the proof of concept solution to match the connectivity functionality of the current solution?

• A. Image Streamer
• B. a Fibre Channel license
• C. OneView Advanced
• D. iLO Advanced Premium Security

Answer: B

NEW QUESTION 16
Where can you find customer-ready HPE content to describe the benefits of a solution you are recommending?

• A. HPE Proposal Web
• B. HPE OneConfig Advanced
• C. HPE Synergy Planning Tool
• D. HPE Single Point of Connectivity Knowledge

Answer: A

NEW QUESTION 17
A customer temporarily needs to add an additional network connection to a provisioned server that is being actively managed by OneView. The server is currently powered down. Which top level option should they click as the first step?

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 18
A customer needs a solution to support Online Transaction Processing (OLTP) and database workloads. Which Gen10 technology would optimize the environment for the customer?

• A. REST API
• B. Silicon Root of Trust
• C. workload profiles
• D. OneView

Answer: C

NEW QUESTION 19
A customer exceeded the number of available VLANs on their network. To resolve this issue, they enabled VXLAN. They inquire about upgrading their servers with the FlexFabric 650 series NIC after this change.
What is the benefit of tunnel offload?

• A. supports data deduplication when VXLAN is enabled
• B. decreases memory load caused by VXLAN
• C. supports data inflight encryption when VXLAN is enabled
• D. decreases CPU load caused by VXLAN

Answer: D

NEW QUESTION 20
A customer asks for a network technology that will maximize throughput and minimize latency and CPU utilization across servers using SMB Direct and 10Gb Ethernet.
Which technology should you propose?

• A. TCP/IP Offload Engine
• B. RDMA
• C. virtual extensible LAN (VXLAN)
• D. InfiniBand

Answer: B

NEW QUESTION 21
A customer has installed a D3940 storage module in an existing Synergy frame. However, none of the compute modules can access the shared storage.
What is the problem?

• A. The storage module has not been initialized in the composer
• B. There are no SAS modules installed in bays 1 and 4
• C. There are no fibre channel modules installed in bays 1 and 4
• D. The I/O modules have not been initialized in the composer

Answer: B

NEW QUESTION 22
A customer is expanding their blade based infrastructure with HPE Synergy platform. The customer is familiar with HPE Virtual Connect Manager and wants to know if the same management procedures can be used to manage HPE Synergy platform.
How should you answer the customer’s concern?

• A. HPE Synergy can be managed by HPE Composer, which is running an embedded version of the HPE OneView.
• B. HPE Synergy must be managed with HPE Systems Insight Manager
• C. HPE Synergy supports Virtual Connect modules, so it can be managed using Virtual Connect Manager
• D. HPE Synergy can be managed using Virtual Connect Manager as long as an additional license is purchased

Answer: B

NEW QUESTION 23
A customer purchased HPE ProLiant Gen10 servers. The customer is transitioning from a physical to a virtual environment.
Which feature should be enabled to ensure that they get the optimal performance from their new servers?

• A. UEFI optimized boot
• B. Integration with an HPE OneView for VMware vCenter
• C. Performance optimization using the workload profiles
• D. OneView OS Build Plan

Answer: C

NEW QUESTION 24
What are features of the HPE Synergy Planning Tool? (Choose two.)

• A. It creates a REST configuration file based on configuration created
• B. It recommends the best top-of-rack switch
• C. It provides estimated power consumption and weights of the solution
• D. It runs on the Partner Ready Portal
• E. It aids configuration of rack, Frames, compute, storage, fabric and power

Answer: CE

NEW QUESTION 25
......