NEW QUESTION 1
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 2
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?

• A. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
• B. Online expansion is available only if RMC is used for management.
• C. HPE Superdome Flex does not support expansion of powered on nPars
• D. Powered nPar can be expanded if it does not use HPE Persistent Memory

Answer: C

NEW QUESTION 3
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

• A. Pause flood protection
• B. sFlow
• C. Storm control
• D. Port flap protection

Answer: B

NEW QUESTION 4
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2
Why would you recommend this change?

• A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
• B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
• C. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
• D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Answer: B

NEW QUESTION 5
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?

• A. CPG management
• B. Volume provisioning
• C. Cache management
• D. Replication setup

Answer: B

NEW QUESTION 6
Which statement about the HPE D3940 storage module is true?

• A. SATA drives requires redundant 10 adapters to be installed in this module
• B. Up to five modules can be installed in a single frame with Gen10 servers
• C. it is configured through CLl available from HPE Synergy console
• D. Only one type of drives (SATA, SAS, SSD) can be installed in each module

Answer: C

NEW QUESTION 7
Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?

• A. The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView
• B. The customer should deploy an HPE OneView appliance for HPE Superdome Flex management
• C. The customer must add a second Rack Management Controller for HPE Superdome Flex 280
• D. The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy

Answer: C

NEW QUESTION 8
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

• A. Pause flood protection
• B. Loop protection
• C. LLDP tagging
• D. Storm control

Answer: D

NEW QUESTION 9
Click the area within the iLO management interface that will allow you to access workload Advisor.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 10
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?

• A. To use all compute nodes, the customer must create at least two logical enclosures
• B. To manage all frames, the customer must buy two additional HPE Composer 2 modules
• C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
• D. The customer can add one D3940 storage Module to each of the frames

Answer: C

NEW QUESTION 11
Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?

• A. Each compute node must have at least 768GB of memory installed
• B. Interconnect modules that provide SAS connectivity should be moved to the third fabric
• C. Each interconnect module in each fabric must be properly licensed in HPE OneView
• D. Compute nodes must have a second CPU installed to access the second fabric.

Answer: A

NEW QUESTION 12
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280. Which statement about these two systems is true?

• A. Only HPE Superdome Rex 280 can be managed using HPE OneView
• B. Only HPE Superdome Flex supports HPE Persistent Memory
• C. Only HPE Superdome Flex 280 can support multiple nPars
• D. Only HPE Superdome Flex supports 32 sockets and 48TB of memory

Answer: A

NEW QUESTION 13
Which statement about login redistribution is true?

• A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
• B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
• C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
• D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Answer: C

NEW QUESTION 14
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?

• A. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
• B. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
• C. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
• D. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules

Answer: D

NEW QUESTION 15
What is one of me benefits of using HPE Composer 2?

• A. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
• B. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
• C. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
• D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer

Answer: A

NEW QUESTION 16
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

• A. HPE OneView offers additional functionalities for HPE Primera like CPG management
• B. HPE OneView offers limited support tor HPE Primera because of the firmware differences
• C. To manage HPE Primera using HPE OneVie
• D. a dedicated license is required
• E. Management procedures and features are the same tor both types of the array

Answer: C

NEW QUESTION 17
......