NEW QUESTION 1

You have a Microsoft Exchange Server 2013 organization that has the following configurations: The forest functional level if Active Directory is Windows Server 2008 R2.
The domain controllers in Active Directory run Windows Server 2012 R2. The Exchange servers run Windows Server 2012 Datacenter.
You plan to upgrade the organization to Exchange Server 2021.
You need to ensure that the organization meets the minimum supported requirements for the upgrade. What should you do?

• A. Upgrade the Exchange servers to Windows Server 2021.
• B. Raise the forest functional level to Windows Server 2012 R2.
• C. Upgrade the Exchange servers to Windows Server 2021.
• D. Upgrade the domain controllers to Windows Server 2021.

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/exchange/plan-and-deploy/system-requirements?view=exchserver-2021

NEW QUESTION 2

You have a Microsoft 365 subscription.
Several users report today that they cannot access email from their mobile device. They successfully accessed their email from the same device yesterday.
You need to identify which mobile device access rule applies to the devices. Which cmdlet should you run?

• A. Get-MsolDevice
• B. Get-ActiveSyncMailboxPolicy
• C. Get-ActiveSyncDeviceClass
• D. Get-MobileDevice

Answer: D

NEW QUESTION 3

You have a Microsoft Exchange Server 2021 organization.
You configure the accepted domains as shown in the following table.

You configure the MX records in DNS as shown in the following table.

In the Exchange organization you create a mail user named User1 who has the following email addresses: User1@sales.contoso.com
User1@sales.adatum.com
User1@fabrikam.com
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 4

You have a Microsoft Exchange Server 2021 organization.
Your company plant to allow user to use their mailbox phone to access their mailbox.
You need to ensure the user devices are password protected before the user can connect to therir mailbox. What should you create?

• A. A device accees rule
• B. A client access rule
• C. A data loss prevention (DLP) rule
• D. A mobile device mailbox polocyu

Answer: D

NEW QUESTION 5

You need to configure a mail flow solution for email that will be sent from each branch office to the Internet. The solution must meet the technical requirements.
What is the best way to achieve the goal? More than one answer choice may achieve the goal. Select the
BEST answer.

• A. a Send connector in the main office that has a cost of 100 and uses a Mailbox server in each office as an SMTP smart host
• B. a Send connector in each office that each has the default costs
• C. two Send connectors in the main office that both have the default costs.
• D. a Send connector in each branch office that has a cost of 100 and uses a Mailbox server in the main office as an SMTP smart host

Answer: D

NEW QUESTION 6

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these Qu estions will not appear in the review screen.
Your company has a Microsoft Exchange Server 2021 server named EX01. EX01 has the default Receive connectors. EX01 receives Internet email on port 25 from an appliance in the company’s perimeter network.
The company has an application named App1 that can only send email on port 25. The application administrator requests that you enable App1 to route email through EX01 for delivery.
You need to ensure that EX01 only accepts email from the appliance and App1.
Solution: You create a new remote domain and set the domain name to App1. You create a new delivery agent connector and set the IsScopedConnector property to $true.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 7

Your company has a Microsoft Exchange Server 2021 hybrid deployment.
Users in the company’s accounting department have on-premises mailboxes. Users in the company’s sales department have mailboxes in Exchange Online.
You need to configure Outlook on the web to meet the following requirements:
The accounting department users must be prevented from using Outlook on the web.
The sales department users must be prevented from using Outlook on the web from the Internet.
The accounting and sales department users must be able to use Outlook Anywhere and Exchange
ActiveSync.
Which cmdlet should you run for the users in each department? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8

Your network contains an Active Directory forest. The forest contains two Active Directory sites named Site1and Site2.
You have a Microsoft Exchange Server 2021 organization that contains a database availability group (DAG) named DAG1. DAG1 has three member servers in each site.
You need to prevent users from Site1 from sending email messages larger than 5 MB to the mailboxes in Site2.
What should you do?

• A. Modify the properties of the Active Directory site link.
• B. From Site1, create a custom Send connector, and then modify the address space.
• C. From Site2, create a custom Receive connector, and then modify the remote IP address range.
• D. Modify the properties of DAG1.

Answer: B

NEW QUESTION 9

You are evaluating the current configuration of the DAG.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 10

You have Microsoft Exchange server 2021 organization that uses a namespaces of Contoso.com. The organization contains the servers shown in the following table.

You need to ensure that users can connect to their mailbox by using a server name of mail.contoso.com
How should you configure the service including info attribute for the Auto discover service?

• A. Run the Set-ClientAcceessService cmdlet on E2 and Ex4.
• B. Run the Set-AutoDiscoverVirtualDirectory cmdlet on Ex2 and EX4.
• C. Run the set –AutoDiscoverVirtualDirectory cmdlet on EX1 and EX3.
• D. Run the Set-ClientAccesService cmdlet on Ex1 and EX3

Answer: C

NEW QUESTION 11

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has two offices.
The network contains an Active Directory forest. The forest contains two domains. Each office is configured as an Active Directory site.
You need to recommend a plan for the deployment of Microsoft Exchnage Server 2021 servers. The plan must ensure that a copy of each sent email message is always retained in a shadow queue.
Solution: You recommend deploying a standalone server to each site. Each server will be in a different domain.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/exchange/mail-flow/transport-high-availability/shadow-redundancy? view=exchserver-2021

NEW QUESTION 12

You have a Microsoft Exchange Server 2021 organization.
A user reports that several email messages were not received. You suspect that the messages were filtered by the Exchange servers.
You need to review the filter that removed the messages. Which cmdlet should you run?

• A. Get-MpThreatDetection
• B. Search-UnifiedAuditLog
• C. Get-AuditLogSearch
• D. Get-AgentLog

Answer: D

Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/antispam-antimalware/get-agentlog?view=excha

NEW QUESTION 13

HOTSPOT
You have a Microsoft Exchange Online subscription that contains the groups shown in the following table.

You have the recipients shown in the following table.

The groups contain the members shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/office365/admin/manage/upgrade-distribution-lists?view=o365-worldwide#wh

NEW QUESTION 14

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft Exchange Server 2021 organization.
You discover that several weeks ago a mailbox administrator erroneously deleted a mailbox from a mailbox database named MailDB1. The mailbox was associated to a user named User1 and an email address of user1@contoso.com.
You verify that User1 still exists in Active Directory.
You need to verify whether the mailbox can be reconnected to User1. Solution: You run the following command.
Get-MailboxRestoreRequest –Identity "user1\MailboxRestore"
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 15

You are deploying a new Microsoft Exchange Server 2021 organization.
You plan to create a database availability group (DAG) that will contain four Mailbox servers and a witness server named FS01. FS01 is a file server.
You attempt to provision the DAG by running the following command. New-DatabaseAvailabilityGroup –Name DAG1-WitnessServer FS01
–WitnessDirectory C: \DAG1
–DatabaseAvailabilityGroupIPAddresses 10.0.0.10 The command fails.
You need to ensure that you can provision the DAG. What should you do?

• A. Run the Set-DatabaseAvailabilityGroup –AutoDagTotalNumberOfServers 5 command.
• B. Add the Server Management group in Active Directory to the local Administrators group on FS01.
• C. Run the Set-DatabaseAvailabilityGroup –AutoDagAutoReseedEnabled $false command.
• D. Add the Exchange Trusted Subsystem group in Active Directory to the local Administrators group on FS01.

Answer: D

Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/database-availability-groups/new-databaseavaila

NEW QUESTION 16

NO: 14 DRAG DROP
You have data centers in Seattle and Montreal. Each data center has its own Active Directory site.
You deploy Microsoft Exchange Server 2021 to a database availability group (DAG) named DAG01. DAG01 spans both data centers.
Each data center contains two Mailbox servers that have Datacenter Activation Coordination (DAC) mode enabled.
A WAN outage prevents communication between the Montreal and Seattle data centers. The outage will last several days.
You stop the cluster service on the Mailbox servers in the Seattle data center, and you stop the DAG in the Montreal data center.
You need to switch all the Exchange operations to the Seattle data center for a weekend.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/exchange/high-availability/manage-ha/datacenter-switchovers?view=exchserve

NEW QUESTION 17
......