getcertified4sure.com

NS0-513 Exam

Network Appliance NS0-513 Free Practice Questions 2021




Act now and download your NS0-513 Exam Questions and Answers today! Do not waste time for the worthless NS0-513 Exam Questions tutorials. Download NS0-513 Exam Questions with real questions and answers and begin to learn NS0-513 Exam Questions and Answers with a classic professional.

Free demo questions for Network Appliance NS0-513 Exam Dumps Below:

NEW QUESTION 1
Your customer complains that their NDMP application can back up data only on a specific NetApp cluster node. You know the customer has recently upgraded all their cluster nodes to clustered Data ONTAP.
What would you recommend to solve their NDMP problems?

  • A. Have the customer verify their firewall configuration to allow the NDMP control connection to pass from one cluster node to the other.
  • B. The NDMP environment variables should be configured to allow the Node-Scoped behavior to backup data on any cluster node.
  • C. Have the customer implement a scripted solution to move their NDMP data and control connections to the necessary cluster node.
  • D. Change their NDMP configuration from Node-Scoped to SVM-Scoped mode.

Answer: D

NEW QUESTION 2
You want to conserve disk space in your SnapVault destinations. You enable storage efficiency on each of the secondary volumes. Which two statements are true in this scenario?
(Choose two.) Response:

  • A. Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.
  • B. Storage efficiency can be enabled on the secondary volume, but a manual schedule will need to be assigned.
  • C. If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.
  • D. SnapVault implicitly uses storage efficiency.

Answer: AC

NEW QUESTION 3
You want to replicate data from ONTAP to NetApp Cloud Backup (formerly AltaVault).
To prevent a conflict with another backup application, you need to update the policy that contains the backup schedule so that the backup runs at a different time of day.
Which product would accomplish this task?
Response:

  • A. OnCommand Unified Manager
  • B. OnCommand System Manager
  • C. OnCommand Insight
  • D. Commvault IntelliSnap

Answer: B

NEW QUESTION 4
Your customer is concerned that his volume might run out of space. Which two volume command options would be used to resolve this problem?
(Choose two.)

  • A. snapshot autodelete
  • B. autosize
  • C. space-guarantee
  • D. filesystem-size-fixed

Answer: AB

NEW QUESTION 5
You have downloaded a user-created OnCommandWorkFlow Automation (WFA) content pack from the NetApp communities Web site and want to import it into your environment.
Which two statements are true in this scenario? (Choose two.)

  • A. The file must be imported through the WFA Web portal.
  • B. You must unpack the zip file before importing it.
  • C. The .exe file can be run directly on the WFA server.
  • D. The .obj file can be placed directly in the content folder on the WFA server.

Answer: AC

NEW QUESTION 6
How are the FC-VI links cabled in MetroCluster for ONTAP?

  • A. one cable to each of the two local FC switches
  • B. controller A is cabled to FC switch A, controller B has both cabled to FC switch B
  • C. directly to the corresponding local HA partner
  • D. directly to the corresponding remote HA partner

Answer: A

NEW QUESTION 7
You are implementing version flexible SnapMirror in a clustered Data ONTAP environment. Which type of SnapMirror policy would be used?

  • A. sync-mirror
  • B. version-flexible
  • C. async-mirror
  • D. vault

Answer: C

NEW QUESTION 8
Your customer wants to implement version flexible SnapMirror relationships. You want to advise the customer about some of the NetApp best practices regarding version flexible SnapMirror relationships.
Which two statements are true in this scenario? (Choose two.)

  • A. The customer will need to upgrade clustered Data ONTAP on one cluster.
  • B. The frequency for replicating volumes must be greater than 60 minutes when the versions of clustered Data ONTAP are not the same.
  • C. You can create a relationship that transfers a specified set of Snapshot copies in addition to the SnapMirror created Snapshot copies.
  • D. You can set up version flexible SnapMirror relationships between Storage Virtual Machines, L—J but not clusters.

Answer: BC

NEW QUESTION 9
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up the database. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?

  • A. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
  • B. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.
  • C. Use SnapManager for Oracle to take the Snapshot copy backup.
  • D. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.

Answer: B

NEW QUESTION 10
Which attribute does Data ONTAP use the identify Snapshot copies between primary and secondary FlexVol volumes in a SnapVault relationship?

  • A. FlexVol name
  • B. Snapshot prefix
  • C. SnapMirror policy
  • D. SnapMirror label

Answer: D

NEW QUESTION 11
A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum. In this scenario, how much burst time do they need to purchase?

  • A. 15 minutes
  • B. 30 minutes
  • C. 45 minutes
  • D. 60 minutes

Answer: C

NEW QUESTION 12
Your customer wants to replicate data between two NetApp clusters in different data centers. Which two
actions must be performed to accomplish this task? (Choose two.)

  • A. A peer relationship must be created between the two clusters.
  • B. One inter-cluster LIF on each node must be configured.
  • C. Every controller in both clusters must have at least one inter-cluster LIF configured.
  • D. Every inter-cluster LIF must be configured on the same port with a data LIF.

Answer: AB

NEW QUESTION 13
Your customer has issued the metrocluster heal command. Which two statements are true regarding this command?
(Choose two.)

  • A. The customer has replaced failed disks in one of the cluster nodes.
  • B. The customer has to run the command twice.
  • C. The customer has one node in the site down and wants to heal the cluster.
  • D. The customer is preparing for a disaster recovery switchback.

Answer: AD

NEW QUESTION 14
You need to restore a file from yesterday's backup. You know that a Snapshot copy is in place on the volume where the data is stored. Other users are not complaining about lost or corrupt data on the volume.
All users are running Windows 7 on desktop computers. How would you recover the file quickly without disrupting other users' data?

  • A. Perform a SnapRestore of the entire volume where the file resides.
  • B. Have the customer reboot the Windows computer to see if the file is really corrupt.
  • C. Have the user right-click on the file in the Windows folder, then select "Restore previous versions" from the list of choices.
  • D. Call the backup administrator and have them load the tape from yesterday's backup and restore the file.

Answer: C

NEW QUESTION 15
You want to have a NetApp FlexVol that can both grow and shrink dynamically as required by current capacity needs. Which settings will enable this feature?

  • A. This can be enabled with the grow_shrink volume autosize mode
  • B. This can be enabled with the grow volume autosize mode.
  • C. This can be enabled with the modify volume efficiency option.
  • D. This can be enabled with the inline-compression volume efficiency option.

Answer: A

NEW QUESTION 16
Click the Exhibit button.
cluster2::>snapmirror show –instance
Source Path: svm1:svm1_vol3
Destination Path: svm1_2:svm1_2_vol2
Relationship Type: DP
Relationship Group Type: none
SnapMirror Schedule: 5min
SnapMirror Policy Type: async-mirror
SnapMirror Policy: DPDefault
Tries Limit: -
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Last Transfer Type: update
Last Transfer Error: -
Last Transfer Size: 72 KB
Last Transfer Network Compression Ratio: 1:1
Last Transfer Duration: 0:0:2
Last Transfer From: svm1:svm1_vol3
Last Transfer End Timestamp: 09/24 13:10:04
Progress Last Updated: -
Relationship Capability: 8.2 and above
Lag Time: 0:0:55
Number of Successful Updates: 1
Number of Failed Updates: 0
Number of Successful Resyncs: 0
Number of Failed Resyncs: 0
Number of Successful Breaks: 0
Number of Failed Breaks: 0
Total Transfer Bytes: 212992
Total Transfer Time in Seconds: 5
You want to view your SnapMirros relationship to make sure it is up to date. You issue the snapmirror show
–instance command. Referring to the exhibit, how long has it been since the last SnapMirror update has successfully occurred?

  • A. 55 minutes
  • B. 55 seconds
  • C. 5 minutes
  • D. 5 seconds

Answer: B

NEW QUESTION 17
You want to find an automated way to handle space utilization in volumes. You have limited space available in your aggregate. Which solution would solve this scenario?

  • A. Enable aggregate compression.
  • B. Enable volume autosize.
  • C. Enable volume level QoS.
  • D. Enable Snapshot autodelete.

Answer: D

NEW QUESTION 18
The customer has experienced a disaster at their primary data center. You have implemented a SnapMirror relationship to meet their needs. You have performed the steps to make the destination volume read/write accessible to the clients.
Which three actions should your consider doing while the customer makes the necessary repairs to their data center? (Choose three.)

  • A. Implement a Snapshot copy schedule on the destination volume.
  • B. Delete all Snapshot copies on the destination volume in preparation for a resynchronize operation.
  • C. Verify that the destination volume has the same settings as the source volume for compression.
  • D. Verify that the destination volume has the same settings as the source volume for deduplication.
  • E. Delete all Snapshot copies on the source volume in preparation for a resynchronize operation.

Answer: ACD

Recommend!! Get the Full NS0-513 dumps in VCE and PDF From Certshared, Welcome to Download: https://www.certshared.com/exam/NS0-513/ (New 93 Q&As Version)