NEW QUESTION 1
Which two features must be licensed on a Cisco Nexus 7000 Switch? (Choose two)

• A. Virtual Port Channel
• B. Layer 3
• C. Virtual Device Contexts
• D. iSCSI
• E. Fibre Channel

Answer: BC

Explanation: Layer 3 license - Enterprise Services Package - LAN_ENTERPRISE_SERVICES_PKG
Virtual Device Contexts license - Advanced Services Package -LAN_ADVANCED_SERVICES_PKG
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/licensing/guide/b
_Cisco_NX-OS_Licensing_Guide/b_Cisco_NX-OS_Licensing_Guide_chapter_01.html

NEW QUESTION 2
Which deployment model is the solution to accommodate fail-over for Cisco Meeting Server?

• A. Single Combined Server Deployment
• B. Single SplitServer Deployment
• C. Scaled and Combined Server Deployment
• D. Scaled and Resilient Server Deployment

Answer: D

NEW QUESTION 3
Which two of the following statements are true with respect to STP in this network? (Choose 2)

• A. Both 5k’s have BPDU Guard and BPDU Filter enabled by default, while both 7k’s do not
• B. Both 5k’s bridge Assurance enabled, while both 7k’s do not
• C. 7k’s is the root bridge for VLANs 100-150
• D. Both 7K-3 and 7k-4 being vPC peers, are the root bridge for VLANs 100-150
• E. No devices have a root cost higher than 1, since all devices are no more that 1 hop away from each other

Answer: BE

NEW QUESTION 4
What two actions can be taken to enable inter-VLAN communications in the data center? (Choose two.)

• A. extend Layer 2 services to a Layer 3 capable VLAN using Layer 3 tunneling.
• B. use a routing protocol to direct packets into the Layer 2 network
• C. connect Layer 2 VLANs together with 802.1Q trunks
• D. deploy a router as a Layer 3 services gateway attached inside each Layer 2 VLAN
• E. install a Layer 3 capable switch in the data center.

Answer: DE

NEW QUESTION 5
A switch is configured to be part of a VTP domain so that its VLAN database is not affected by any changes in the domain. Which mode should be configured on this switch?

• A. client
• B. transparent
• C. server
• D. neutral

Answer: B

NEW QUESTION 6
Which statement is true about the crossconnections between 5k’s and 7k’s in the network?

• A. VLAN 100 is the native VLAN
• B. 56 extended VALN are configured in the network
• C. VLANs 125-150 are allowed on the cross connections between the 7k’s and 5k’s
• D. VLANs 100-124 are err-disabled on the cross connections between the 7k’s and 5k’s

Answer: C

NEW QUESTION 7
Which two descriptions of Fibre WWNs are true? (Choose two.)

• A. 48bits long
• B. 64 or 128 bits long
• C. 96 bits long
• D. manually configured on each device by an administrator
• E. allocated to manufactures by IEEE

Answer: BD

NEW QUESTION 8
What is a function of an endpoint?

• A. To join 3 or more participants in a meeting.
• B. To act us a traffic cop fornetwork communication.
• C. To schedule calls.
• D. To provide an audio and video interlace for the user.

Answer: D

NEW QUESTION 9
Which protocol is used for an immersive telepresence meeting?

• A. H.239
• B. Assent
• C. TIP
• D. H.323

Answer: C

NEW QUESTION 10
Which statement is correct regarding the assignment of endpoints to asubzone?

• A. By default, all endpoints are registered to the Neighbor Subzone.
• B. By default, all endpoints are registered to the Default Subzone.
• C. Registration Restriction Rule must be configured that matches the endpoint's alias or IP subnet.
• D. Endpoints making a traversal call must be registered to the Traversal Subzone.

Answer: B

NEW QUESTION 11
The kickstart image is corrupted on a Cisco Nexus 7000 switch. Which procedure is used to download a new kickstart image?

• A. Boot the system and press Ctrl-] while the memory test is in progress to interrupt the boot loader.
• B. Boot the system and press the Esc key while the memory test is in progress to interrupt the boot loader.
• C. Boot the system and press the Esc key after the BIOS memory test to interrupt the boot loader.
• D. Boot the system and press Ctrl-] after the BIOS memory test to interrupt the boot loader.

Answer: C

NEW QUESTION 12
When you enter the feature npv command on a storage-capable switch from Cisco, what is the result?

• A. N-Port Virtualization is enabled without rebooting.
• B. The switch reloads and erases the current configuration before it enables the feature N-Port ID Virtualization.
• C. The switch reloads and erases the current configuration before it enables the feature N-Port Virtualization.
• D. N-Port ID Virtualization is enabled without rebooting.

Answer: C

NEW QUESTION 13
Which statement about SAN zooming is true?

• A. Describes can belong to more than one zone.
• B. zones must be the same size.
• C. zone membership can be configured only on a pWWN basis.
• D. Hard zoning can be disabled

Answer: A

NEW QUESTION 14
Which command should be used to determine which hosts are Fibre Channel targets?

• A. MDS-A# show host database
• B. MDS-A# show flogi database
• C. MDS-A# show fens database
• D. MDS-A# show host-id

Answer: B

NEW QUESTION 15
When writing new App in Tropo, in what format should the App Script be saved/

• A. .xml
• B. .json
• C. .js
• D. .mp4

Answer: C

NEW QUESTION 16
Which list contains the different methods of authorization that are used by AAA?

• A. T ACACS+, ACL, AD, Local, and RADIUS
• B. TACACS+, ACL, Local, and AD
• C. TACACS+, None, Local, and ACL
• D. TACACS+, None, Local, and RADIUS

Answer: A

NEW QUESTION 17
VLAN 10 is assigned IP address 10.1.1.1 with subnet mask 255.255.255.0. Which configuration is used to route the IP subnet but not form OSPF neighbors on a Cisco Nexus 7000 switch?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A