NEW QUESTION 1
Refer to the exhibit
The BIG-IP Administrator is unable to access the management console via Self-IP 10.10 1.33 and port 443. What is the reason for this problem?

• A. Packet Filter needs to be configured to allow a source
• B. Self IP is configured to allow TCP All
• C. Self IP is configured to allow UDP 443
• D. Packet Filter is configured to allow port 443

Answer: C

NEW QUESTION 2
A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server? (Choose two.)

• A. TCP
• B. HTTP
• C. HTTPS
• D. ClientSSL
• E. ServerSSL

Answer: AD

NEW QUESTION 3
Which type of Virtual Server requires the use of a FastL4 profile?

• A. Performance (Layer 4)
• B. Stateless
• C. Performance (HTTP)
• D. Standard

Answer: A

NEW QUESTION 4
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity. The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?

• A. Round Robin
• B. Dynamic Ratio
• C. Ratio
• D. Least Connection

Answer: C

NEW QUESTION 5
Which two statements are true about SNATs? (Choose two.)

• A. SNATs are enabled on all VLANs, by default.
• B. SNATs can be configured within a Profile definition.
• C. SNATs can be configured within a Virtual Server definition.
• D. SNAT's are enabled only on the VLAN where origin traffic arrives, by default.

Answer: AC

NEW QUESTION 6
Refer to the exhibit.

A BIG-IP Administrator configures a now VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device.
Which VLAN setting should be changed to prevent this issue?

• A. Auto Last Hop
• B. Fail-safe
• C. Customer Tag
• D. Source Check

Answer: B

NEW QUESTION 7
A site has assigned the ICMP monitor to all nodes and a custom monitor, based on the HTTP template, to a pool of web servers. The HTTP based monitor is working in all cases. The ICMP monitor is failing for 2 of the pool member 5 nodes. All other settings are default. What is the status of the monitor is working in all cases?

• A. All pool members are up since the HTTPbased monitor is successful.
• B. All pool members are down since the ICMPbased monitor is failing in some cases.
• C. The pool members whose nodes are failing the ICMPbased monitor will be marked disabled.
• D. The pool members whose nodes are failing the ICMPbased monitor will be marked unavailable.

Answer: D

NEW QUESTION 8
How is persistence configured?

• A. Persistence is an option within each pool's definition.
• B. Persistence is a profile type; an appropriate profile is created and associated with virtual server.
• C. Persistence is a global setting; once enabled, loadbalancing choices are superceded by the persistence method that is specified.
• D. Persistence is an option for each pool membe
• E. When a pool is defined, each member's definition includes the option for persistence.

Answer: B

NEW QUESTION 9
The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?

• A. Create a new VLAN object and set Customer Tag to 120
• B. Create a new VLAN object and assign the interface 1.1 untagged
• C. Create a new trunk object with interface 1.1 assigned
• D. Create a new trunk object and assign it to the VLAN

Answer: B

NEW QUESTION 10
A site would like to ensure that a given web server's default page is being served correctly prior to sending it client traffic. They assigned the default HTTP monitor to the pool. What would the member status be if it sent
an unexpected response to the GET request.?

• A. The pool member would be marked offline (red).
• B. The pool member would be marked online (green).
• C. The pool member would be marked unknown (blue).
• D. The pool member would alternate between red and green.

Answer: B

NEW QUESTION 11
A BIG-IP Administrator is configuring a pool with members who have differing capabilities. Connections to pool members must be load balanced appropriately.
Which load balancing method should the BIG-IP Administrator use?

• A. Least Sessions
• B. Least Connections (member)
• C. Fastest (node)
• D. Weighted Least Connections (member)

Answer: D

NEW QUESTION 12
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, what changes, if any, would take place when the BIG-IP processes such packets?

• A. The BIG-IP would drop the request since the traffic didn’t arrive destined to the NAT address.
• B. The source address would not change, but the destination address would be changed to the NAT address.
• C. The source address would be changed to the NAT address and destination address would be left unchanged.
• D. The source address would not change, but the destination address would be changed to a self-IP of the BIG-IP.

Answer: C

NEW QUESTION 13
Refer to the exhibit.

How many nodes are represented on the network map shown?

• A. Four
• B. Three
• C. One
• D. Two

Answer: B

NEW QUESTION 14
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: •*****»;0; License is not operational (expired or digital signature does not match contents.)
What should the BIG-IP Administrator do to avoid this error?

• A. Use the appropriate tmsh command with the no-license option
• B. Revoke the license prior to restoring
• C. Reactivate the license on the new device using the manual activation method
• D. Remove the license information from the UCS archive

Answer: A

NEW QUESTION 15
Which must be sent to the license server to generate a new license?

• A. the system's dossier
• B. the system's host name
• C. the system's base license
• D. the system's purchase order number

Answer: A

NEW QUESTION 16
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?

• A. /war /log/daemon.log
• B. /var/log/kern.log
• C. /var/log/ltm
• D. /var/log/audit

Answer: C

NEW QUESTION 17
A site has six members in a pool. All of the servers have been designed, built, and configured with the same applications. It is known that each client's interactions vary significantly and can affect the performance of the servers. If traffic should be sent to all members on a regular basis, which loadbalancing mode is most effective if the goal is to maintain a relatively even load across all servers?

• A. Ratio
• B. Priority
• C. Observed
• D. Round Robin

Answer: C

NEW QUESTION 18
A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member?

• A. 200.200.1.1
• B. 150.150.10.11
• C. Floating self IP address on VLAN where the packet leaves the system
• D. Floating self IP address on VLAN where the packet arrives on the system

Answer: B

NEW QUESTION 19
......