NEW QUESTION 1
A BIG-IP Administrator suspects that one of the BIG-IP device power supplies is experiencing power outages.
Which log file should the BIG-IP Administrator check to verify the suspicion?

• A. /war /log/daemon.log
• B. /var/log/kern.log
• C. /var/log/ltm
• D. /var/log/audit

Answer: C

NEW QUESTION 2
A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix.
What should the BIG-IP Administrator do to change the boot location to the previous hotfix?

• A. Uninstall the newest hotfix and reinstall the previous hotfix
• B. Reinstall the base version and install the previous hotfix
• C. Reinstall the previous hotfix and re-activate the license
• D. Uninstall the base version and restore the UCS

Answer: B

NEW QUESTION 3
A BIG-IP Administrator needs to view the CPU utilization of a particular Virtual Server. Which section of the Configuration Utility should the administrator use for this purpose?

• A. Statistics > Module Statistics > Local Traffic > Virtual Addresses
• B. Statistics > Module Statistics > Traffic Summary
• C. Statistics > Analytics > Process CPU Utilization
• D. Statistics > Module Statistics > Local Traffic > Virtual Servers

Answer: D

NEW QUESTION 4
Which event is always triggered when a client initially connects to a virtual server configured with an HTTP profile?

• A. HTTP_DATA
• B. CLIENT_DATA
• C. HTTP_REQUEST
• D. CLIENT_ACCEPTED

Answer: D

NEW QUESTION 5
When configuring a pool member's monitor, which three association options are available? (Choose three.)

• A. inherit the pool's monitor
• B. inherit the node's monitor
• C. configure a default monitor
• D. assign a monitor to the specific member
• E. do not assign any monitor to the specific member

Answer: ADE

NEW QUESTION 6
A BIG-IP Administrator wants to add the ASM Module to an HA pair of BIG-IP devices. The BIG-IP Administrator has already installed a new Add-On License on both devices in the HA pair. What should the BIG-IP Administrator do next to use the module?

• A. Provision the new module on both BIG-IP device's
• B. Synchronize both BIG-IP devices
• C. Reboot both BIG-IP devices
• D. Reactivate the Licenses on both BIG IP devices

Answer: A

NEW QUESTION 7
A BIG-IP system has the following configuration:
* SNAT is set to Auto Map
* There are two VLANs internal and external
* Default route is pointed to the gateway on external VLAN
* Self P for internal VLAN is 1921.1.2
* Self IP for external VLAN is 192.1.2.2
* Floating IP addresses for internal VLAN is 192.1.1.1
* Floating IP addresses for external VLAN is 192.1.2.1
* The Virtual Server IP address is 192.1.1.100
Which IP address does the BIG-IP system use first when traffic reaches the servers on the internal VLAN?

• A. 192.1.1.100
• B. 192.1.2.2
• C. 192.1.1.1
• D. 192.1.2.1

Answer: C

NEW QUESTION 8
A node is a member of various pools and hosts different web applications. If a web application is unavailable, the BIG-IP appliance needs to mark the pool member down for that application pool. What should a BIG-IP Administrator deploy at the pool level to accomplish this?

• A. A UDP monitor with a custom interval/timeout
• B. A combination of ICMP + TCP monitor
• C. An HTTP monitor with custom send/receive strings
• D. A TCP monitor with a custom interval/timeout

Answer: C

Explanation:
Requiring all traffic to be HTTPS access requires HTTP requests to be redirected directly to HTTPS.

NEW QUESTION 9
A BIG-IP Administrator needs to restore an encrypted UCS archive from the command line using the TMSH utility.
Which TMSH command should the BIG-IP Administrator use to accomplish this?

• A. load/sys ucs <filepath> passphrase <password>
• B. load/sys config file <filepath> passphrase <password>
• C. load/sys config file <filepath>
• D. load/sys ucs <filepath> no-license

Answer: A

NEW QUESTION 10
Which cookie persistence method requires the fewest configuration changes on the web servers to be implemented correctly?

• A. insert
• B. rewrite
• C. passive
• D. session

Answer: A

NEW QUESTION 11
A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it: when CLIENT_ACCEPTED { if {[TCP::local_port] equals 21 } { pool
ftppool } elseif {[TCP::local_port] equals 23 } { pool telnetpool }
If a user connects to 10.10.1.100 and port 22, which pool will receive the request?

• A. ftppool
• B. telnetpool
• C. Non
• D. The request will be dropped.
• E. Unknow
• F. The pool cannot be determined from the information provided.

Answer: D

NEW QUESTION 12
What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

• A. That support is never available.
• B. The virtual server must be enabled for both VLANs.
• C. The virtual server must be enabled on the internal VLAN.
• D. The virtual server must be enabled on the external VLAN.

Answer: C

NEW QUESTION 13
A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?

• A. Interfaces
• B. Network routes
• C. VLANS
• D. IP addresses

Answer: A

Explanation:
trunk is a portchannel, you need to add a physical interface.

NEW QUESTION 14
Assuming other failover settings are at their default state, what would occur if the failover cable were to be disconnected for five seconds and then reconnected?

• A. As long as network communication is not lost, no change will occur.
• B. Nothin
• C. Failover due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
• D. When the cable is disconnected, both systems will become activ
• E. When the voltage is restored, unit two will revert to standby mode.
• F. When the cable is disconnected, both systems will become activ
• G. When the voltage is restored, both systems will maintain active mode.

Answer: C

NEW QUESTION 15
The BIG-IP Administrator disable all pool members in a pool Users are still able to reach the pool members.
What is allowing users to continue to reach the disabled poo! members?

• A. A slow to time on Pool
• B. A persistence profile on the Virtual Server
• C. A slow ramp time on virtual Server
• D. A persistence profile on the Pool

Answer: B

NEW QUESTION 16
A BIG-IP Administrator is working with a BIG-IP device and discovers that one of the Interfaces on a Trunk is DOWN.
What is the reason for this Interface status?

• A. The switch is NOT connected to the Interface
• B. There is NO transceiver installed on the Interface
• C. There is NO default route configured for this trunk
• D. The media speed of the interface has NOT been set

Answer: A

NEW QUESTION 17
A BIG-IP Administrator is informed that traffic on Interface 1.1 is expected to increase over the maximum bandwidth capacity on the link. There is a single VLAN on the Interface. What should the 8IG-IP Administrator do to increase the total available bandwidth?

• A. Assign two Interfaces to the VLAN
• B. Set the media speed of Interface 1.1 manually
• C. Create a trunk object with two Interfaces
• D. Increase the MTU on the VLAN using Interface 1.1

Answer: C

NEW QUESTION 18
A BIG-IP Administrator needs to purchase new licenses for a BIG-IP appliance.
The administrator needs to know if a module is licensed and the memory requirement for that module. Where should the administrator view this information in the System menu?

• A. Resource Provisioning
• B. Configuration > Device
• C. Software Management
• D. Configuration >OVSDB

Answer: A

NEW QUESTION 19
......