NEW QUESTION 1
Refer to the exhibit.

Which type of cable connector is displayed that is used to connect antennas to transmitters?

• A. RP-TNC
• B. N
• C. SMA
• D. SMB
• E. MMCX

Answer: B

NEW QUESTION 2
After enabling global multicast, multicast traffic has been flooding the wired and wireless network. The wireless engineer has been troubleshooting and is attempting to find the source of the traffic. What command will display the multicast traffic source as well as the incoming interface?

• A. show ip mroute
• B. show ip igmp groups
• C. show ip pim neighbor
• D. show ip device tracking all

Answer: A

NEW QUESTION 3
A university is in the process of deploying a wireless network in an auditorium that seats 500 students and supports student laptops. Which deployment methodology should the university implement in the auditorium?

• A. Roaming design model
• B. Location design model
• C. High-density design model
• D. Voice design model

Answer: D

NEW QUESTION 4
While evaluating a post-installation WLAN deployment, problems are occurring when a client roams from one AP to another. The client bounces back and forth between APs. Which two items can be checked to resolve this issue? (Choose two.)

• A. Check if the roaming settings in the AP are set properly for non-CCX clients
• B. Check the RF levels of the first AP as the client moves toward the second AP
• C. Check the client RSSI and SNR levels for both APs at the roaming point
• D. Simplify 802.1X/EAP by moving from external RADIUS to local authentication
• E. Check that the client roaming parameters are set properly

Answer: BC

NEW QUESTION 5
What document must be kept current when a customer is conducting network maintenance?

• A. readiness report
• B. survey report
• C. installation report
• D. technical report

Answer: C

NEW QUESTION 6
Which two information points should a pre-site survey QUESTION NO:naire contain? (Choose two.)

• A. list of clients used
• B. hours during which the survey can be performed
• C. access point density required
• D. approximate square footage of facility
• E. total number of APs in use

Answer: CD

Explanation: https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-surveyguidel

NEW QUESTION 7
You must configure IPV6 to drop unwanted or rogue RA packets that come from wireless clients. Which feature do you enable?

• A. DHCPv6 Server Guard
• B. IPv6 Source Guard
• C. RA throttling
• D. RA guard

Answer: D

NEW QUESTION 8
An engineer is shipping equipment, including a battery, for a wireless survey overseas. To ensure that it is accepted onto the aircraft, the battery must comply with which standard?

• A. EC
• B. FCC
• C. IATA non-restricted
• D. FAA

Answer: C

NEW QUESTION 9
Which three reasons describe the importance of assessing existing wired infrastructure when designing a new wireless network? (choose three)

• A. determine quality of service
• B. Determine UPS requirement
• C. Determine CAPWAP support
• D. Determine POE requirement
• E. Determine port bandwidth
• F. Determine cable length

Answer: AEF

NEW QUESTION 10
Which type of information should be included in an installation report?

• A. A complete characterization of the external WLAN environment.
• B. The exact number of users the WLAN will support.
• C. Soft copies of configuration for switches, routers, controllers, and location appliances.
• D. A detailed description of the WLAN environment during the post-installation testing, for example, number of people present, furniture, no furniture, and sources of interference present.

Answer: C

NEW QUESTION 11
A customer has a business-critical voice network and wants to be alerted whenever voice clients move out of a coverage area and experience RSSI below -67 dBm on the 5 GHz band. Which option can be configured on the wireless controller to alert network administrators when this limit is surpassed?

• A. EDCA; voice optimized
• B. SIP voice sample interval
• C. 802.11a voice RSSI coverage threshold
• D. traffic stream metrics

Answer: C

NEW QUESTION 12
A customer requesting a site survey requires hidden APs, basic data coverage, and guest access in multifloor environment. Which industry vertical best describes this customer?

• A. manufacturing
• B. warehousing
• C. hospitality
• D. health care

Answer: C

NEW QUESTION 13
While performing a Layer 1 passive wireless site survey of a location an engineer detects several instances of low power frequency hopping interference, but cannot physically locate the interfering device or devices. Why is the engineer unable to locate the offending device or devices?

• A. The sources are nearby narrow-beam radar and are sweeping through the facility.
• B. The sources are PAN and are mobile.
• C. The sources are above the ceiling file and transmit intermittently.
• D. The sources are actually high-powered devices and transmit from off the site.

Answer: B

NEW QUESTION 14
While preparing to perform a wireless site survey on a site with ID26496007 , an engineer acquires an autonomous access point of the model specified by the client for the future deployment. A requirement of the survey is to support a target device that has a hardware defined Tx power of 7Mw in 5GHz. Witch two commands should be configured on the survey AP?

• A. Guest-mode
• B. Local power 5
• C. Radius-server key string
• D. Local power 14
• E. Station-role root access-point

Answer: BE

NEW QUESTION 15
A network has two Cisco WLCs and two Layer 3 gigabit Ethernet switches. The customer requires two gigabit connections from each Cisco WLC to each of the switches that have copper RJ-45 gigabit ports. What two additional hardware are needed to connect the Cisco WLCs to the network? (Choose two.)

• A. Four straight-through Ethernet cables
• B. Layer 3 switching module in each of the Cisco WLCs
• C. Four copper SFPs must be added to the kit list
• D. Two console cables
• E. Four rollover Ethernet cables

Answer: AC

NEW QUESTION 16
Which option will allow the maximum 2.4 GHz channel usage for a survey and voice deployment in the ETSI domain?

• A. 1, 6, 11
• B. 1, 5, 9, 13
• C. 1, 6, 9, 14
• D. 1, 6, 11, 14

Answer: A

NEW QUESTION 17
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

• A. Paint the access point to cover the LED from being noticeable
• B. Use enclosures to hide the wireless infrastructure in the surrounding environment
• C. Deploy environmentally friendly cabling components to blend into the environment.
• D. Use AIR-AP-BRACKET-1 to allow for greater mounting locations

Answer: C