Want to know features? Want to lear more about experience? Study . Gat a success with an absolute guarantee to pass Cisco 300-360 (Designing Cisco Wireless Enterprise Networks) test on your first attempt.
Cisco 300-360 Free Dumps Questions Online, Read and Test Now.
NEW QUESTION 1
Which two pieces of physical infrastructure information should be included in the installation report presented to the customer? (Choose two.)
Answer: DE
NEW QUESTION 2
What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?
Answer: C
NEW QUESTION 3
An engineer is preparing for an outdoor wireless survey to mesh connect a distant remote building to a connected building. Which two types of antennas are appropriate for this application? (Choose two.)
Answer: BD
NEW QUESTION 4
A hospital environment was designed to guarantee RF coverage at or better than -67 dBm in the 5 GHz spectrum. The customer mandates that RRM be used for DCA and TPC in both bands. After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?
Answer: D
NEW QUESTION 5
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?
Answer: B
NEW QUESTION 6
You must create a simple implementation of QoS on a WIAN. The implementation must allow clients to prioritize traffic into these four classes:
voice video best effort
background
Which option do you enable?
Answer: C
Explanation: WMM Classification
WMM uses the 802.1P classification scheme (part of the IEEE 802.1D MAC Bridges standard). This classification scheme has eight priorities that WMM maps to four access categories with WMM designations:
AC_BK--Background AC_BE--Best effort AC_VI--Video AC_VO--Voice
NEW QUESTION 7
An engineer is deploying outdoor Cisco Aironet 1500 Series Access Points and wants to protect the network from overvoltage transients.
Which two protection methods must be used? (Choose two)
Answer: AB
Explanation: https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1550/installation/guide/1550hig/1550_ch2.html
NEW QUESTION 8
When calculating bandwidth usage for an application, what two values represent the minimum and maximum 802.11 overhead per frame? (Choose two.)
Answer: CF
NEW QUESTION 9
Which two modifications to station behaviors were designed in the IEEE 802.11e protocol? (Choose two.)
Answer: BC
NEW QUESTION 10
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. Which of the following is a requirement for the design?
Answer: C
NEW QUESTION 11
A wireless phone user is having roaming difficulties and is experiencing gaps in the conversation while roaming.
WLC WLAN is configured as IEEE 802.1X and WPA2 and Aironet information element. What should be configured to fix the problem?
Answer: A
Explanation: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/ Enterprise_Mobility_8-1_Deployment_Guide.pdf
NEW QUESTION 12
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
Answer: A
Explanation: Coverage (Cell Size)
Lower data rates can be demodulated across greater distances than higher data rates. This is because of the lower complexity encoding schemes — the signal can be understood at a lower SNR. Enable lower data rates in order to increase the effective range of the AP; disable the lower data rates in order to decrease the effective range of the AP.
Figure 16: Coverage (Cell Size)
NEW QUESTION 13
The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 7925 phones. Which two WLC settings accomplish this goal? (Choose two.)
Answer: BD
NEW QUESTION 14
What protocol can be enabled to listen in on IPv4 multicast streams and maintain a map of what each client requests on a wireless LAN controller?
Answer: A
NEW QUESTION 15
A customer is deploying a mesh outdoor wireless network based on FCC standards where spectrum analysis shows significant radar energy propagating throughout the coverage area from a local weather station. Which channel must be excluded from the access points RRM calculation to avoid network disruption due to weather radar activity?
Answer: A
Explanation: Weather radars operate within the 5600- to 5650-MHz band, which means that channels 124 and 128 might be affected, but also channels 120 and 132 might suffer from weather radar activity.
NEW QUESTION 16
Which two critical requirements must be addressed in the RF site survey for wireless video surveillance? (Choose two.)
Answer: AB
NEW QUESTION 17
An engineer must design a wireless voice network and is auditing the existing configuration. Which two actions must be taken? (Choose two.)
Answer: AC
Explanation: https://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/
P.S. Easily pass 300-360 Exam with 168 Q&As Certshared Dumps & pdf Version, Welcome to Download the Newest Certshared 300-360 Dumps: https://www.certshared.com/exam/300-360/ (168 New Questions)